• Transactions on Electrical and Electronic Materials
• /
• 제10권6호
• /
• pp.222-226
• /
• 2009

The objective of this study is to share multimedia contents included in existing digital devices and to solve the problems of an increase in installation fees and non-environmentally friendly interiors. This study designed a new digital signal transmitter and receiver using power line transmission and HDMI in order to solve the problems in the existing systems. The transmitter and receiver designed in this study used an AD9867BCPZ PLC chip in which the transmission came from digital signals originating in a PC, and the system architecture was configured so that the outputs signals were connected to a TV from the receiver. The experiment was implemented by adding a Video Test Generator, a USBPre external sound card, and Smaart Live 6 for analyzing the characteristics of the configured system. In the video test results, it was verified that communication was actively implemented, and the image quality showed a constant level from the measurement of the captured video. In the case of the sound, it was verified that more than 90% of the sound signals were normally transmitted and received from the examination of their phases and magnitudes. Thus, the performance of the system designed in this study was verified, which leads to the resolution of some of the problems found in current digital devices.

• 한국건설관리학회논문집
• /
• 제7권5호
• /
• pp.94-104
• /
• 2006

주택공급제도 개편의 일환으로 공공택지에서 공급되는 $85m^2$이하 주택에 대하여 분양가상한제의 확대시행과 분양가 주요항목에 대한 원가공개를 골자로 하는 주택법의 개정에 따라 건축비 산정체계의 현실적인 개편의 필요성이 대두되고 있다. 분양가상한제는 택지비와 건축비를 연동시켜 분양가를 결정하는 제도로, 택지비는 공공기관이 관계법에 의하여 개발 후 공급하는 택지가격에 의하여 결정되지만, 건축비는 정부에서 발표하는 상한가격내에서 결정하도록 하는 제도로서 분양가상한제의 주요쟁점은 적정 건축비 상한가를 책정하는 것이다. 이에 본 연구에서는 적정 건축비를 추정하는 방안을 실제 가상모델사업을 중심으로 제시하고 신축적 운영방안을 제안하였다. 다양한 자료수집 분석 및 전문가들의 의견 수렴 결과, 대한주택공사 예정가격을 기초로 산정한 1,028천원/$m^2$(공급면적, 지하주차장공사비 제외)이 적정한 수준으로 나타났으며, 지하층면적, 구조형식, 단지환경수준, 소비자선호도등에 따라 신축적으로 운영되어야 한다는 결과를 얻었다. 본 연구에서 밝힌 연구과정 및 결과는 정부의 부동산관련 정책수립은 물론 학계의 유사 연구에 일조할 것으로 기대된다.

• 한국건설관리학회논문집
• /
• 제19권1호
• /
• pp.74-79
• /
• 2018

적정한 낙찰률을 유도하는 제도의 수립은 시설물의 품질보장과 기업의 합리적인 이윤추구를 위해 매우 중요하다. 하지만 과거 낙찰제도의 변화와 최근 사례를 통해 덤핑이나 고가낙찰 등이 남아있어 부실공사, 기업의 적자 또는 세금낭비 등을 유발하고 있는 것을 볼 수 있다. 본 연구는 낙찰률 형성의 배경을 파악하고 기업의 입찰행태에 대한 이해를 증진하기 위해 실제 입찰시장의 데이터를 분석하였다. 투찰률에 각 변수가 주는 영향을 파악하기 위하여 다중회귀분석을 실시하였다. 특히 기업규모를 세분화하여 분석함으로써 기업규모별 상이한 투찰행태를 함께 확인하고자 하였다. 그 결과 사업규모의 경우 모든 기업규모에서 투찰률과 양의 상관관계를 보였으나 연간발주규모, 시공능력평가액의 경우 중소기업과 대기업이 투찰률에 대하여 서로 상반되는 상관관계를 보였다. 본 연구의 결과를 통해 제시된 여러 변수들이 기업이 입찰행위를 함에 있어서 실질적으로 영향을 미치고 있다는 것과 같은 변수라도 기업규모에 따라 투찰률에 영향을 주지않거나 각기 다른 상관관계를 보임을 알 수 있었다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.469-474
• /
• 2008

The objective of this study is to propose basic design guidelines for more effective air ventilation system in apartments. It is well known that ventilation depends on whether the room doors are open or closed as well as people's living patterns. This study considers 84 ㎡-sized apartment which has extended living room without balcony. Ventilation of bathroom and kitchen is not considered. The height of the building, external air pressure and air infiltration through the windows are also neglected. The regulation on indoor air quality made it mandatory that the air change per hour be more than 0.7. Four models are suggested to study the effect of open and closed doors. Models 1 and 3 are open door types and models 2 and 4 are closed door types. The open types have 50 mm hole near the top of the door to substitute exhaust outlet. The ventilation effectiveness was evaluated by 3-dimensional numerical simulation using finite volume method by a commercial software. This work compares air flow, temperature of air, age of air and the efficiency of ventilation of apartments with wooden doors of bedroom 1 and 2, which are open or closed.

• 전자공학회논문지CI
• /
• 제42권3호
• /
• pp.73-82
• /
• 2005

최근 인터넷의 광범위한 보급과 연결 응용 프로그램들의 개발에 따라 디지털 멀티미디어 자료(사진, 영화, 디지털오디오)의 보급 및 사용이 쉬워지고 있다. 그렇지만, 디지털 신호는 복제가 용이하고 복제된 데이터가 원 데이터와 동일한 품질을 가질 수 있다. 이러한 문제점의 해결방안으로써 연구되거나 사용되고 있는 저작권 보호방법은 크게 암호화(encipher)에 의한 방법과 워터마킹(watermarking) 기술을 사용한 방법이 있다. 디지털 워터마킹은 지적재산권의 보호와 올바른 멀티미디어 자료의 소유권자를 인증하기 위해 사용되어진다. 본 논문은 컬러 정지영상에 웨이블렛 변환을 사용하여 256 그레이 로고 이미지와 컬러 이미지를 워터마크 시킬 수 있는 워터마킹 알고리즘을 제안하였다. 제안된 알고리즘은 웨이블렛 변환 영역(LL, LH, HL, HH) 중 LH 주파수 영역에 워터마크를 삽입시켰으며, 워터마크에 데이터 통신에 사용되는 인터리빙 알고리즘을 적용시켜 워터마크 데이터량이 증가하여 PSNR이 감소하나 압축, 필터링, crop 등의 외부공격에 강인성을 가지게 된다.

• Safety and Health at Work
• /
• 제8권1호
• /
• pp.11-18
• /
• 2017

The purpose of this review is to name and describe the important factors of musculoskeletal strain originating from pushing and pulling tasks such as cart handling that are commonly found in industrial contexts. A literature database search was performed using the research platform Web of Science. For a study to be included in this review differences in measured or calculated strain had to be investigated with regard to: (1) cart weight/ load; (2) handle position and design; (3) exerted forces; (4) handling task (push and pull); or (5) task experience. Thirteen studies met the inclusion criteria and proved to be of adequate methodological quality by the standards of the Alberta Heritage Foundation for Medical Research. External load or cart weight proved to be the most influential factor of strain. The ideal handle positions ranged from hip to shoulder height and were dependent on the strain factor that was focused on as well as the handling task. Furthermore, task experience and subsequently handling technique were also key to reducing strain. Workplace settings that regularly involve pushing and pulling should be checked for potential improvements with regards to lower weight of the loaded handling device, handle design, and good practice guidelines to further reduce musculoskeletal disease prevalence.

• International Journal of Railway
• /
• 제1권2호
• /
• pp.72-81
• /
• 2008

This paper introduces a new steel jacketing method for reinforced concrete columns with lap splice and evaluates its performance by a series of axial tests of concrete cylinders. At first, 45 concrete cylinders were fabricated with varying the design compressive strengths of 21, 27 and 35 MPa and, then, the part of them was jacketed with two-split-steel jackets under lateral confining pressure. The parameters in the first test were the steel jacket's thickness and the existence of adhesive between steel and concrete surface. In the second test, whole steel jackets were used to wrap cylinders with lateral pressure. Also, a double-layer jacket consisted of two steel plates was introduced; a cylinder was jacketed by two steel plates one after another. The effect of the new method was verified through comparing the results of the compressive tests for plain and jacketed cylinders. The steel jacket built following the new method showed good results of increasing the compressive strength and ductility of the jacketed cylinders with respect to the plain cylinders. The thicker steel jackets showed the more increased compressive strength, and the ductility at failure depended on the welding quality on steel jackets. The adhesive between steel and concrete surface reduced the confining effect of the steel jackets. The whole jacket showed more ductile behavior than the two-split jackets. The double-layered jackets were estimated to possess an equal performance to that of a single steel jacket having the same thickness of the double-layered jacket. Finally, the experimental results were compared with the constitutive model of steel-jacketed concrete; which showed a good agreement between the experimental results and the models.

• 산업경영시스템학회지
• /
• 제20권43호
• /
• pp.175-195
• /
• 1997

The learning curve has an important effect the growth of corporation. But, in Korea, the study and inference on the learning rate of each industry are unprepared, and so, Korean industires have difficult in productivity and cost. At this point, this study infers the learning rate of the oil industries and investigates the productivity and growth of them. In conclusion, this study presents the direction of the oil industries' development. With the intention of this objects, this study seizes the status which is concerned the total quantity, the operating rate, the plant capacity, the indicators concerning productivity, the investment of R & D and the scales, and then, infers and verifies the relevancy in connection with the learning rate. In the oil industry, the average rate of learning is 65.96% from 1982 to 1994 which the total quantity and the average operation time are used to infer the rate. To observe the low rate within a same period of time, this study takes the consequences that the learning rate is almost indentical with them each year. This steady state is caused by a difference between the employee and the decision maker about the acquirement and assimiliated of technology. When the high-quality technologies posses the environment to applicate in the scene of labor with them, this technology applies to the productivities. As the learning rate increases, the productivity has more effectiveness. The result of analysis about the effectiveness of the learning rate follows that the R & D unfoldes to exist and does not contribute to the growth of the oil industry. To analyze the variables of the growth, such as the learning rate, the investement of R & D, the operating rate and the gross value added to property, plant and equipment, the model is established and examined. The business strategy in the oil industry must be developed to achive the internal growth as well as the external.

• 한국병원경영학회지
• /
• 제4권1호
• /
• pp.1-20
• /
• 1999

Since the late 1980s, there have been radical changes in the managerial environment of Y University Medical Center(YUMC). Externally, the competition among hospitals has intensified due to the establishment of universal health insurance in 1939 and the entrance of large enterprises into the health care industry in the early 1990s. In addition, government regulation of medical institution is becoming stricter. Also, consumer groups have continued to demand the respect for patient rights and improvement of the quality of medical services. Internally, the financial condition of YUMC has worsened, not only because weak control and poor mediation in its large-scale structure have made its operation inefficient, but also because the rates of increase in the prices of goods and labor have grown faster than any increases in revenues. This study on materials management at YUMC presents a way for YUMC to reduce costs and increase its productivity, thereby overcoming its financial difficulties and dealing with external pressures. This study utilized the case studies of the materials purchasing and medical supply management in the United States and the comparative analysis of management to suggest short-term and long-term alternatives for innovation in YUMC. The goals of the short-term alternatives for innovation are to centralize the purchasing and supply departments and to simplify the decision-making processes. Through these attempts, it is estimated that YUMC's costs could be reduced by $600,000 per year. In the long-term, it is necessary to consider introducing a Supply Processing Distribution(SPD) system and setting up a centralized electronic system for supply and inventory management, although it is difficult to estimate the effect of cost-cutting because of the lack of analysis data. Thus, YUMC should thoroughly analyze initial investment costs and economical efficiency generated from long-term alternatives.

• 융합보안논문지
• /
• 제13권4호
• /
• pp.19-25
• /
• 2013

백본(코어) 네트워크에서 유연하고 안정적인 품질이 보장되는 서비스 제공에 대한 요구가 폭발적으로 증가하면서 이러한 요구를 수용하기 위해 제어평면의 프로토콜로 MPLS/GMPLS가 도입되었다. GMPLS 기반 제어평면에서 경로계산 및 상호연동 기능은 최적의 서비스 품질을 제공하기 위한 핵심기술 중의 하나이다. 이를 위해 IETF에서는 Path Computation Element (PCE) 구조를 제안하였다. PCE는 경로계산 전용의 네트워크 요소이며 경로계산을 요청하는 Path Computation Clients (PCC) 와 경로계산을 수행하는 PCE 간의 통신은 PCE 프로토콜 (PCEP)을 이용한다. 본 논문은 PCE 기반 경로계산 구조에 대해서 살펴보고 이를 기반으로 PCEP 설계 및 구현을 위한 몇 가지 요소를 제시하였다. 우선 본 논문에서는 PCEP Finite State Machine (FSM)을 포함하여 각 상태에서 필요한 동작 요소를 정리하였다. 또한 본 논문에서는 PCEP에서 제공하는 통신 채널을 효과적으로 제어하기 위한 내부/외부 인터페이스를 더불어 제안하였다.