• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.653-661
• /
• 2007

Overseas construction projects tend to be more complex than domestic projects, being exposed to more external risks, such as politics, economy, society, and culture, as well as more internal risks from the project itself. It is crucial to have an early understanding of the project condition, in order to be well prepared in various phases of the project. This study compares a structural equation model and multiple regression analysis, in their capacity to predict cost performance of international construction projects. The structural equation model shows a more accurate prediction of cost performance than does regression analysis, due to its intrinsic capability of considering various cost factors in a systematic way.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.68-69
• /
• 2015

Traditional External Insulation Finishing System(EIFS) is applied to apartment construction by performing structural framework and insulation finishing work sequentially. Separate execution of the three works increases construction cost and duration. Concurrent construction method of EIFS, which performs framework and insulation finishing work simultaneously, is introduced in order to solve these problems. However, the introduced method is exposed to the risk of construction delay caused by bottlenecks due to interacting processes and resources. Therefore, this paper presents a simulation model suitable for estimating work productivity of the concurrent construction by considering predecessor and successor processes to optimize resource allocation and minimize construction delay.

• ETRI Journal
• /
• v.29 no.4
• /
• pp.452-456
• /
• 2007

Very compact 4-channel 200-GHz-spacing external cavity lasers (ECLs) were fabricated by hybrid integration of reflection gratings and superluminescent laser diodes on a planar lightwave circuit chip. The fifth-order gratings as reflection gratings were formed using a conventional contact-mask photo-lithography process to achieve low-cost fabrication. The lasing wavelength of the fabricated ECLs matched the ITU grid with an accuracy of ${\pm}0.1$ nm, and optical powers were more than 0.4 mW at the injection current of 80 mA for all channels. The ECLs showed single mode operations with more than 30 dB side lobe suppression.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.2
• /
• pp.231-237
• /
• 2015

The pin-gear drive is a special form of fixed-axle gear mechanism. A large wheel with cylindrical pin teeth is called a pinwheel. As pinwheels are rounded, they have a simple structure, easy processing, low cost, and easy overhaul compared with general gears. They are also suitable for low-speed, heavy-duty mechanical transmission and for occasions with more dust, poor lubrication, etc. This paper introduces a novel slewing ring bearing with an external pinwheel gear set (e-PGS). First, we consider the exact cam pinion profile of the e-PGS with the introduction of a profile shift. Then, the contact stresses are investigated to determine the characteristics of the surface fatigue by varying the shape design parameters. The results show that the contact stresses of the e-PGS can be lowered significantly by increasing the profile shift coefficient.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.165-168
• /
• 2006

Carbon fiber reinforced polymer(CFRP) have superior mechanical and chemical properties in comparison with conventional materials. And post-tensioning method has been used for structural reinforcement of RC structures due to easy installation and good effect of resisting capacity of structures. But the higher cost of CFRP and the loss of prestressing force with time are considered the major problems to use it. In this study, CFRP Strips and external post tensioning for rehabilitation of old concrete structures were adapted and optimal combination of these methods is considered. A total of 17 concrete members were made and tested. The types and numbers of CFRP strips and post-tensioning types were selected as major test variables. From test results, it is shown that the concrete members that post tensioned and bonded CFRP strips has a pronounced effect on the strength and deformational behavior. This present study indicates that external temporally post tensioning can reduce the amount of CFRP strips required and the combination of temporally post tensioning and CFRP strips may meet the strength and ductility requirements of old structures.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.2
• /
• pp.103-108
• /
• 2005

Loading/Unloading task in the real industry is performed by crane, but most of the loading/unloading task with the weight of 5kg∼30kg is done by human workers and this kind of work causes industrial disaster of workers. Therefore it is necessary to develop low cost loading/unloading manipulator system to prevent this kind of industrial accidents. This paper is concerned with the design and fabrication of 2 axis pneumatic manipulators using on/off solenoid valves and accurate position control without respect to the external load and low damping in the pneumatic rotary actuator. To overcome the change of external load, switching of control parameter using LVQNN (Learning Vector Quantization Neural Network) is newly applied, which estimates the external loads in the pneumatic cylinder. As an underlying controller, a state feedback controller using position, velocity and acceleration is applied to the switching control system. The effectiveness of the proposed control algorithms are demonstrated through experiments of pneumatic cylinder with various loads.

• Korean Journal of Audiology
• /
• v.23 no.1
• /
• pp.15-19
• /
• 2019

Background and Objectives: To determine the efficacy of filling the external auditory meatus with 1% clotrimazole at a single visit for the treatment of otomycosis. Subjects and Methods: This prospective study included 40 patients who were referred to our clinic with complaints of ear itching, pain, and fullness, and were diagnosed with unilateral otomycosis. After cleaning the mycotic hyphae from the external auditory meatus, the ear canal was filled with 1% clotrimazole, using an intravenous catheter and syringe. The patients received follow-up examinations on post-treatment days 7, 15, and 45. Results: The follow-up otomicroscopic examinations revealed that 95% of the ear canals were entirely clean and that all symptoms had resolved. The post-treatment scores of pain, aural fullness and itching were significantly lower than the pre-treatment scores (p<0.01). Conclusions: Filling the external auditory meatus with 1% clotrimazole at a single visit is an easy, efficient, and cost-effective treatment for otomycosis. Additionally, high patient compliance makes this treatment superior to long-term topical therapy.

• Journal of Audiology & Otology
• /
• v.23 no.1
• /
• pp.15-19
• /
• 2019

Background and Objectives: To determine the efficacy of filling the external auditory meatus with 1% clotrimazole at a single visit for the treatment of otomycosis. Subjects and Methods: This prospective study included 40 patients who were referred to our clinic with complaints of ear itching, pain, and fullness, and were diagnosed with unilateral otomycosis. After cleaning the mycotic hyphae from the external auditory meatus, the ear canal was filled with 1% clotrimazole, using an intravenous catheter and syringe. The patients received follow-up examinations on post-treatment days 7, 15, and 45. Results: The follow-up otomicroscopic examinations revealed that 95% of the ear canals were entirely clean and that all symptoms had resolved. The post-treatment scores of pain, aural fullness and itching were significantly lower than the pre-treatment scores (p<0.01). Conclusions: Filling the external auditory meatus with 1% clotrimazole at a single visit is an easy, efficient, and cost-effective treatment for otomycosis. Additionally, high patient compliance makes this treatment superior to long-term topical therapy.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.16 no.4
• /
• pp.3-12
• /
• 2006

RFID (Radio Frequency Identification) system is expected to play a critical role providing widespread services in the ubiquitous period. However, widespread use of RFID tags may create new threats to the privacy of individuals such as information leakage and traceability. It is difficult to solve the privacy problems because a tag has the limited computing power that is not the adequate resource to support the general encryption. Although the scheme of [2] protects the consumer privacy using an external agent, a tag should compute exponential operation needed high cost. We propose Self Re-Encryption Protocol (SREP) which provides song privacy without assisting of any external agent. Our SREP is well suitable to low-cost RFID system since it only needs multiplication and exclusive-or operation.

• Journal of the Society of Disaster Information
• /
• v.18 no.2
• /
• pp.252-260
• /
• 2022

Purpose: As the intensity and frequency of natural hazards are increasing due to climate change, external events that affecting nuclear power plants(NPPs) may increase. NPPs must be protected from external events such as natural hazards and human-induced hazards. External events that may occur in NPPs should be identified, and external events that may affect NPPs should be identified. This study introduces the methodology of identification and screening methods for external events by literature review. Method: The literature survey was conducted on the identification and screening methods of external events for probabilistic safety assessment of NPPs. In addition, the regulations on the identification and screening of external events were investigated. Result: In order to minimize the cost of external event impact analysis of nuclear power plants, research on identifying and screening external events is being conducted. In general, in the identification process, all events that can occur at the NPPs are identified. In the screening process, external events are selected based on qualitative and quantitative criteria in most studies. Conclusions: The process of identifying and screening external events affecting NPPs is becoming important. This paper, summarize on how to identify and screen external events for a probabilistic safety assessment of NPPs. It is judged that research on bounding analysis and conservative analysis methods performed in the quantitative screening process of external events is necessary.