• 한국CDE학회논문집
• /
• 제19권2호
• /
• pp.91-102
• /
• 2014

The outer surface of an irregular structure contains panels with two-directional curvature called NURBS. To construct these forms of exterior materials, complex geometric surface should be divided into forms and sizes that can be manufactured and constructed. Because the bigger the curvatures of these divided exterior panel, the more expensive the construction costs, these complex two-directional curvatures should go through optimal process of reinterpretation to minimize the curved surfaces with complex two-directional curvatures. Yet, to gain higher ground in technological competition in the field of irregular structure construction, companies do not share know-how that they obtained. Accordingly, small construction and design companies have trouble calculating even rough estimate and cannot adjust expected construction cost based on comparison of design alternatives. Given this situation, this study conducted the research that can support decision-making in the design stage of the construction and provide basic material for optimal range to reduce manufacturing cost by the minimizing the distorted plane of the irregular structure.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 추계 학술논문 발표대회
• /
• pp.137-140
• /
• 2009

Nowadays, the high performance composite materials are famous for the new construction materials as the construction buildings are bigger and higher. Out of them of all, the fiber reinforced concrete and mortar have been studied to develop and strengthen the performances of concrete, such as tensile strength, durability and the resistibility of crack. Also, it is considered that precast concrete is important alternatives of dry process for saving time, upgrading the material's quality and the productivity. Thus, PC panel is being produced for the use of dry wall as well as exterior finishing materials and it requires lots of tests and studies to be conducted to meet the various functional conditions. According to this study, it is considered that PVA fiber might be more effective than nylon fiber for developing the exterior PC panels.

• 한국농촌건축학회논문집
• /
• 제6권3호
• /
• pp.63-74
• /
• 2004

This study is focusing on the Nagan Folk Village, primarily because of its historical and cultural values. The purpose of this study, accordingly, analysis the fact of the dwelling change through spot-survey and case-investigation, and is to find a way to improve for the rational preservation of the traditional dwelling analyzing on the actual condition and the reason for such changes in the Nakan Folk Village. The dwelling change is stemmed from the physical factors, and some modifications of internal composition, exterior formation, building equipment. As a result, The changes of internal composition are included in the reduction of garnering room, the enlargement of bed/service room, the establishment of mechanical room. The changes of exterior formation with structural material are included in the glass door for the internalization of 'TOEMARU', the extra glass door for the brightening of room, the cement plastering for the endurance of wall. The changes of building equipment are included in the establishment of oil-boiler, wash closet, sink for convenient life All houses should be graded on their qualitative value, managed in a cycle. And its own criterion for acceptable deformations should be established.

• 한국실내디자인학회논문집
• /
• 제14권4호
• /
• pp.62-69
• /
• 2005

This study shows the present conditions and the appraisal of Public-Toilet in ammusement park of Kangwon-Do. The areas of Public-Toilets are various from over $30m^2\;to\;230m^2$ and the construction costs are also various. The exterior designs aim at Provincial characteristics, traditional images, or modem minimal styles. The floor plans are usually symmetric forms by rectangular or circular spaces. There are some laws and manuals from related association to regulate Public-Toilet. By appraising with these laws and manuals we can notice that there are many problems to improve in Public-Toilet. As the survey, we can find that the unpreparedness of the cognition equipment about whether someone uses the public-toilet has most frequency in related laws. And by the laws about multipurpose toilet, the insufficiency of the accessing space to the chamber pot has most frequency. By the manual of related association, there are much more indications - for example, the unpreparedness of wind protection room or etiquette bell, so on - than by related laws. For the improvement of the culture In Public-Toilet, we should not only improve the related laws, but also activate the deliberation about the appropriate planning in Public-Toilet.

• 복식문화연구
• /
• 제17권4호
• /
• pp.535-547
• /
• 2009

This study presented a making method of jeans pattern with high fitness after deriving the appropriate shrinkage rate by material and washing process. For this purpose of this study, 6 jeans have been tested after washing finishing and we turned out appropriate shrinkage rate by evaluating the exterior of jeans and usage satisfaction. Then, a making method of jeans pattern was presented after applying the optimized shrinkage rate. According to the result of the exterior evaluation of test jeans, all 6 jeans were rated high with scores close to 3.5. Following the evaluation of satisfaction of usage by physical movement, the highest ranking was in the order of walking with normal steps, back bending $90^{\circ}$, chair sitting, climbing stairs, and squatting. The shrinkage rate by physical area showed the highest score in the order of pants length, waist circumference, thigh circumference, knee circumference, hem circumference, hips circumference. In addition, the shrinkage rate was higher in warp direction than weft direction after washing finishing. As for the result of addition and reduction of pattern measurements by parts of jeans, waist circumference was 2.6${\sim}$5.2cm, hips circumference was 1.3${\sim}$4.2cm, thigh circumference was 0.8${\sim}$3.1cm and knee circumference was 0.7${\sim}$2.5cm. Also, hem circumference was 0.5${\sim}$1.8cm and pants length was 4.0${\sim}$6.2cm. That is, this results showed a wide range of addition and reduction according to material and washing finishing.

• 한국산학기술학회논문지
• /
• 제16권9호
• /
• pp.5789-5794
• /
• 2015

최근 스마트 폰, 모바일 PC 제품의 외관에 필요한 가벼운 금속제품으로 제조를 하기 위하여 알루미늄 압출 공정과 CNC 가공기법을 적용한 생산방식이 널리 사용되고 있다. 하지만, 알루미늄 압출법은 외관 디자인의 제약이 있으며, 특히 CNC 가공 프로세스가 상대적으로 높은 생산 비용 및 낮은 생산성으로 생산단가가 많이 높은 단점이 있다. 본 연구에서, 새로운 처리 방법을 순서 재료비를 대폭 감소시키고, 제조 속도를 향상시키기 위해 판재성형과 부피성형의 두가지 공정을 섞어 새로운 판단조 공정을 개발하였다. 새로운 판단조 공법(hybrid plate forging)이란 우선 일반적인 딥드로잉으로 중간 모양을 만든 후 원하는 벽 부위만 증육을 하는 방법을 의미한다. 이러한 판단조 공법을 활용하여 재료의 낭비와 제조 시간을 최소화하는 것이 가능하게 된다. 본 연구에서는 상용 유한 요소 프로그램 AFDEX-2D를 통해 판단조공정을 설계하였고 최적의 사용 가능한 소재의 두께와 초기 폭을 설계하였다. 최종적으로 실제 노트북 케이스 금형을 제작하여 제안한 방법의 타당성을 검증하였다.

• 한국실내디자인학회논문집
• /
• 제33호
• /
• pp.19-26
• /
• 2002

This study analyzed the characteristics of spatial expression in the Barcelona Pavilion to be based on tectonics. Mies pointed out the image of materiality about the material rather than the process of tectonics using the material, and he also expressed demateriality in the image of each material through the reflection. To be liberated from structural matters, the wall has been introduced. He intended to show the design plan as the independent structural system, however, the wall actually seems to be supporting the roof that shows rather clearly self-contradictory because of the expression of materiality in the material. In terms of architectural elements; wall, roof, column, floor, and so forth, tectonic expression and abstract aesthetics stands face to face, because of hiding the productional process and transforming to line and surface in the image of materiality. The interior of the glass wall seems fairly closed space from the exterior, because materiality and reflection of materials of columns and podium. The character of experiential space is inconsistent and fragmentary because of the splendid images from maternality and reflection on the wall, and collision with the reality and the image the wall reflects, even though the geometrical space of the Pavilion's plan has the mutual penetrability and organic character.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제9권1호
• /
• pp.71-76
• /
• 2001

Factors governing the rate of heat exchange comprise temperature, air velocity, relative humidity, and relation indoors. Recently, there are many researches on the transient analysis of indoor environmental factors such as dry bulb temperature, relative humidity and air velocity in miniature models. The purpose of this study is to measure the environmental factors and to analyze and evaluate the characteristics of indoor environment in different envelop structures using granite dome models. The interior relative humidity is constant regardless of exterior humidity although a little range of variation is shown in comparison to the cement model.

• 한국주거학회논문집
• /
• 제17권1호
• /
• pp.37-45
• /
• 2006

The purpose of this study is to explore the spacial boundary in Kazuyo Sejima's housing architecture, to give attention to contemporary housing architecture that we inhabit, and to escape from existing architectural concepts. This study seeks to the meaning and possibility of the spacial boundary on the basis of contemporary architecture. The spacial boundary can be studied in the aspect of architectural space that molds human experience and perception. As a result of this study, three properties in the spacial boundary are revealed. One property of the spacial boundary is soft that protect privacy from gaze of exterior. Another property is that communication that changes according to material of boundary and its experience of observer. The other property is to have uncertainty by compound of programs and material-mixing senses including its perception. This results means that the spacial boundary as interface which is represent our everyday life in the contemporary housing architecture.

• 대한기계학회논문집
• /
• 제19권3호
• /
• pp.713-723
• /
• 1995

In intelligent machine tools, a computer based control system, which can adapt the machining parameters in an optimal fashion based on sensor measurements of the machining process, should be incorporated. In this paper, the technology for adaptively optimizing the cutting conditions to maximize the material removal rate in face milling operations is proposed using the exterior penalty function method combined with multilayered neural networks. Two neural networks are introduced ; one for estimating tool were length, the other for mapping input and output relations from experimental data. Then, the optimization of cutting conditions is adaptively implemented using tool were information and predicted process output. The results are demonstrated with respect to each level of machining such as rough, fine and finish cutting.