• 대한기계학회논문집A
• /
• 제21권1호
• /
• pp.164-172
• /
• 1997

Two parameter technique that uses far-field stress and displacement distributions was applied to composite laminates in order to calculate mode II energy release rate, $G_{II}$ . The $G_{II}$ calculated by two parameter technique was compared with that calculated from the crack closure method to inspect the effectiveness of two parameter technique. Sensitivity study of two parameter technique to the crack extension size was also performed. The results showed that both methods produced comparable $G_{II}$ results. In particular, it was found that although the crack closure method was affected by the crack extension size, the two parameter technique was less affected by the crack extension size.

• Journal of Welding and Joining
• /
• 제14권5호
• /
• pp.87-94
• /
• 1996

It has been well known in GMA welding process that wire feeding speed (WFS) or deposition rate increases linealy with the increase of wire extension. In this investigation, however, such an well-known relationship was .reconsidered in terms of contact-tube to work distance (CTWD) instead of wire extension. To verify the proposed relationship between WFS and CTWD, bead-on-plate welding was performed with various CTWDs in the range of 15∼35mm under the condition of near-constant voltage and current As expected, the test results showed an excellent linear relation between WFS and CTWD. Furthermore, the value of the slope turned out to be quite similar to those of previous investigators obtained either theoretically or experimentally through the Precise measurement of electrode extension. Present result also demonstred that the increase of CTWD could be very practical measure for increaring deposition rate without any increase of heat input Depending on the tip recess the practical maximum of CTWD was appeared to be limited somewhere in 25∼30mm mainly due to the entrappment of porocity.

• 한국의류산업학회지
• /
• 제8권5호
• /
• pp.591-596
• /
• 2006

In order to analyze the tailorbility of different fabrics for men's suit, FAST system has been used for measuring the distribution of mechanical properties in this study. As results, cashmere mixed woolen fabrics showed the minimum degree in relaxation shrinkage, formability, and shear rigidity than any other fabrics, and also showed more than 6% as maximum level of extensibility. Thus, cashmere mixed woolen fabrics requires careful tailoring in lay-out, marking, and cutting. It is necessary to establish new tailoring criteria for automatic sewing with cashmere mixed woolen fabrics than any other fabrics, because they show more failure rate of tailorbility. There have been noticeably more variation of shrinkage and extension for woolen fabrics with cashmere mixed than 100% woolen fabrics by evaluating the formability of the suits when these are completed to suits through cutting and tailoring from fabrics. Especially nylon mixed woolen fabrics showed shrinkage overall, but polyester mixed woolen fabrics showed extension at waist area. Thus, it is necessary to adjust the appropriate overfeed rate considering the amount of shrinkage and extension while tailoring.

• 한국작물학회지
• /
• 제44권3호
• /
• pp.186-190
• /
• 1999

The objective of this study was to ,determine trinexapac-ethyl [4-(cyclopropyl- $\alpha$ -hydroxy-me-thylene)-3,5-dioxocyclohexanecarboxylic acid ethyl ester] effects on lodging-related traits of rice varieties treated at different application rates and times. Trinexapac-ethyl WP was applied at the rate of 10, 20 and 30g ai/l0a to Heukjinjubyeo and Daeanbyeo, respectively. Effects of trinexapacethyl varied greatly with application time as well as application rate with little differences between rice varieties. As the application rate increased, lodging index, center of gravity and exsertion of panicle above flag leaf decreased, whereas breaking strength and phytotoxicity increased. Exsertion of panicle was greatly influenced by the application time with a little difference by application rate. The most effective application time of trinexapac-ethyl based on lodging index and total internode length (Ist-4th node) was 2DBH(days before heading) in Heukjinjubyeo and 17DBH in Daeanbyeo, resulting in reducing total internode length by 12.9 and 9.7cm, respectively. A significant reduction was found at the 1st, 2nd, and 3rd internodes in Heukjinjubyeo, while at the 2nd and 3rd internodes in Daeanbyeo. No significant difference was found among treatments in the panicle length of both rice varieties but the panicle fresh weights of Daeanbyeo were significantly greater in all trinexapac-ethyl treatments compared with that of the control when measured 20 days after heading. Consequently, trinexapacethyl treatment significantly improved lodging-related traits of rice plants without affecting rice yield and yield components.

• 한국작물학회지
• /
• 제53권spc호
• /
• pp.72-77
• /
• 2008

This study was carried out to determine the response of the rice yield and grain quality by rice leaf folder (RLF, Cnaphalocrocis medinalis G.) and identify the damages caused by different transplanting dates, nitrogen amounts and chlorophyll amounts (SPAD value) of rice leaf. As the damage degree of RLF was getting severer, the ripened grain rate and 1000-grain weight were decreased and due to the increasing of chalky rice rate the rate of head rice was reduced. Therefore, the yield of head rice was decreased by 36% in heavily damaged rice plant. Among the physicochemical characteristics, protein content of rice grain was increased but amylose content was reduced, consequently, the palatability was deteriorated in heavily damaged rice by RLF. The degree of damage of RLF was getting serious as transplanting date was delayed and as the amount of nitrogen was increased. In the relationship between the SPAD value and the damage degree of RLF, as the SPAD value was increased by nitrogen fertilizing, the damage degree was also increased exponential functionally.

• 생물환경조절학회지
• /
• 제12권4호
• /
• pp.180-183
• /
• 2003

변색된 종자에서 분리된 P. wasabiae에 접종된 종자는 평균 52.4%의 낮은 발아율을 보였으나 benomyl 침지처리에 의해 발아율이 83.3%로 향상되었다. 멸균 토양에 파종된 접종종자는 28.0%의 먹들이병, 12.7%의 모잘록병 발병률을 보였으나, benomyl로 침지처리된 종자는 먹들이병 6.0%, 모잘록병 4.7%의 낮은 발병률을 나타냈다. P. wasabiae가 접종된 토양에 공시 약제로 처리된 종자를 파종한 결과 먹들이병 발병률은 약제를 처리하지 않은 종자의 32.0%에 비해 benomyl 침지처리에서 12.0%로 발병이 억제되었고, 모잘록병은 10.7%의 가장 낮은 발병률을 보였다.

• 한국약용작물학회지
• /
• 제22권3호
• /
• pp.231-236
• /
• 2014

This experiment was carried out to establish the optimum cutting time, plant growth regulator, and bed-soil for rooting by greenwood cutting of Schisandra chinensis. Approximately 7 cm long-shoots of greenwood cuttings were transplanted by various cutting times, plant growth regulators, and bed-soils in the plastic-film house. The rooting rate of greenwood cutting was 12.5% in the April 5th, 73.5% in the May 8th, and 75.5% in the August 5th. The number and length of primary root in greenwood cutting were more in the early May than those in the early August. For mass propagation of Schisandra chinensis. using greenwood cutting, shoots were treated with plant growth regulators on May to increase rooting rate. Rooting rate was 100% with IAA $50mg/{\ell}$, 92.9% with NAA $100mg/{\ell}$, and NAA $1,000mg/{\ell}$, for 60 min. To select effective media for rooting, various medias for bed-soil were treated by single and mixture form for 100 days after cutting. Rooting rate was 91.8% in the single treatment of peat moss or decomposition of granite soil, and this result was better than those in other treatment. The treatment by 1 : 1 mixture of peat moss and horticulture bed soil was rooting with 94.0% best rooting rate.

• 한국작물학회지
• /
• 제59권2호
• /
• pp.194-200
• /
• 2014

고구마 괴근의 표피에 선모양으로 돌출되어 나타나는 피맥의 발생동향을 조사하고, 경감하기 위한 시험의 결과는 아래와 같다. 1. 고구마 피맥은 표피가 줄무늬로 돌출되어 상품성을 저하시키는 증상으로서 피맥발생은 표피층에 전분이 집적되어 발생하는 것으로 관찰되었고, 조기재배보다 보통기재배에서 발생이 많았다. 2. 고구마 품종에 따른 피맥발생은 건풍미, 연황미, 건미 등 7품종이 3%이하로 적었고, 헬씨미, 보라미는 30%이상 발생하였다. 만중은 피맥발생과 정의 상관관계가 있었다. 3. 고구마 피맥은 생육기간이 진전됨에 따라 증가하다가 삽식 후 120일경에 가장 높았다. 4. 고구마 삽식 후 90일의 적심비율에 따른 피맥발생율은 일정한 경향을 보이지는 않았다. 엽면적지수 4에서 피맥발생율이 가장 적었으나, 일정한 경향을 보이지는 않았고, 경엽절제비율이 높을수록 수량감소가 크게 나타났다.

• 한국자원식물학회지
• /
• 제31권4호
• /
• pp.355-362
• /
• 2018

본 연구는 증식이 어려운 코끼리마늘(Allium ampeloprasum L.)의 종구 보급을 위해 기내배양 기술을 이용한 대량증식 시스템을 개발하기 위해 수행되었다. 코끼리마늘의 미숙총포를 수확 직후 길이별로 채취하여 MS배지에 NAA와 kinetin 생장조절제를 혼합 농도 처리하여 배양한 결과, 10 cm 길이로 채취하였을 때가 절편체당 신초수 14.9개로 가장 많이 얻어졌다. 생장조절제 농도에 따른 생장을 조사한 결과, kinetin 2 mg/L와 NAA 0.5 mg/L를 첨가한 MS배지에서 절편체당 신초수가 14.9개로 가장 많았고 초장은 11.3 cm였으며, 생체중은 2.5 g으로 가장 좋았다. 코끼리마늘 기내소구 형성에 적합한 최적 배지조성은 생장조절제 kinetin 2 mg/L, NAA 0.5 mg/L를 첨가한 MS 배지에 다신초 유기물질인 adenine 30 mg/L를 첨가하였을 때 구 형성률이 48%로 높았으며, 이 배지에 sucrose 7%를 첨가하였을 때 기내종구 형성률이 98.2%로 증가하였다. 다신초 유도를 위한 계대배양은 1차 배양 단계보다 2차 계대배양 단계에서 신초 증식배율이 좋았으며, 2차 계대배양에서 구 형성률은 80%로 높게 나타났다.

• Structural Engineering and Mechanics
• /
• 제46권2호
• /
• pp.179-196
• /
• 2013

An experimentally measured single footfall trace (SFT) from a walking subject needs to be extended into a continuous force curve, which can then be used as load for floor vibration serviceability assessment, or on which further analysis like discrete Fourier transform can be conducted. This paper investigates the accuracy, applicability and parametrical sensitivity of four extension methods, Methods I to IV, which extends the SFT into a continuous time history by the walking step rate, stride time, double support proportion and the double support time, respectively. Performance of the four methods was assessed by comparing their results with the experimentally obtained reference footfall traces in the time and frequency domain, and by comparing the vibrational response of a concrete slab subjected to the extended traces to that of reference traces. The effect of the extension parameter on each method was also explored through parametrical analysis. This study finds that, in general, Method I and II perform better than Method III and IV, and all of the four methods are sensitive to their extension parameter. When reliable information of walking rate or gait period is available in the test, Methods I or II is a better choice. Otherwise, Method III, with the suggested extension parameter of double support time proportion, is recommended.