• 대한원격탐사학회지
• /
• 제19권5호
• /
• pp.341-349
• /
• 2003

The so-called B-method, a simplified surface energy budget, permits calculation of daily actual evapotranspiration (ET) using remotely sensed data, such as NOAA-AVHRR. Even if the use of satellite data allows estimation of the albedo and surface temperature, this model requires meteorological data measured at ground-level to obtain the other inputs. In addition, a difficulty may be occurred by the difference of temporal scales between the net radiation in daily scale and instantaneous measurement at midday of the surface and air temperatures because the data covered whole day are necessary to obtain accumulated daily net radiation. In order to solve these problems, this study attempted a modification of B-method through an extension of hourly ET value calculated using a complete instantaneous inputs. The estimation of the daily apparent ET from newly proposed system showed a root mean square error of 0.26 mm/day as compared the output obtained from the classical model. It is evident that this may offer more rapid estimation and reduced data volume.

• Journal of Mechanical Science and Technology
• /
• 제17권6호
• /
• pp.914-924
• /
• 2003

The interaction and breakdown of vortices over the Leading Edge Extension (LEX) - Delta wing configuration has been investigated through wing-surface pressure measurements, the off-surface flow visualization, and 5-hole probe measurements of the wing wake section. The description focused on analyzing the interaction and the breakdown of vortices depending on the angle of attack and the sideslip angle. The Effect of angle of attack and sideslip angle on the aerodynamic load characteristics of the model is also presented. The sideslip angle was found to be a very influential parameter of the vortex flow over the LEX-delta wing configuration. The introduction of LEX vortex stabilized the vortex flow, and delayed the vortex breakdown up to a higher angle of attack. The vortex interaction and breakdown was promoted on the windward side, whereas it was suppressed on the leeward side.

• The Plant Pathology Journal
• /
• 제30권1호
• /
• pp.82-89
• /
• 2014

In 2009-2010, unusual symptoms were observed on Pleurotus eryngii grown in mushroom farms in Gyeongnam Province, Republic of Korea. One of the main symptoms was a cobweb-like growth of fungal mycelia over the surface of the mushroom. The colonies on the surface rapidly overwhelmed the mushrooms and developed several spores within 3-4 days. The colonized surface turned pale brown or yellow. The fruit body eventually turned dark brown and became rancid. Koch's postulates were completed by spraying and spotting using isolated strains. The phylogenetic tree obtained from the internal transcribed spacer sequence analysis showed that the isolated fungal pathogen corresponded to Cladobotryum mycophilum (99.5%). In the fungicide sensitivity tests, the $ED_{50}$ values for the isolate with respect to benomyl and carbendazim were from 0.29 to 0.31 ppm. Benzimidazole fungicides were most effective against C. mycophilum, a causal agent of cobweb disease in P. eryngii.

• 한국포장학회지
• /
• 제4권1호
• /
• pp.17-21
• /
• 1997

Zeolite powder used by molecular sieve, adsorbants and catalist. 1N HCl teated zeolite powders for freshness extension of fruits and vegetables showed that specific surface area was $300.29m^2/g$ largest then that of the others, and ethylene gas adsorbability was 29.07 cc/g. And then 0.5N NaCl Henting after 1N HCl treated zeolite powder showed that specific surface area and ethylene gas adsorbability was $329.43m^2/g$ and 35.64 cc/g largest then those of the others. Specific surface area of processed zeolite powder treated by high intensity magnetic seperator(HIMS) showed $369.67m^2.g$, ethylene gas adsorbability was 39.87cc/g. In this study, it could be employ 0.5N NaCl treat and HIMS methods as MA packaging materials for freshess extension of fruits and vegetables.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권6호
• /
• pp.197-205
• /
• 2020

주택법(2014년)에 근거하여 철근콘크리트 공동주택의 리모델링 시 수직 및 세대수 증축이 가능하게 되었다. 수직증축 리모델링 가능 여부는 안전진단 기준 및 매뉴얼을 바탕으로 기울기 및 침하, 내하력, 내구성 평가 부문에 대한 평가를 통하여 판정하도록 되어 있다. 그러나 증축형 리모델링 기준 및 매뉴얼 제정 당시, 국내에서는 수직증축 리모델링 안전진단 사례가 전무하여 평가기준 등에 대한 공학적 근거 제시에 한계가 있었으며, 특히 내구성 평가 기준에 대한 합리화 및 관련 기준과의 부합을 위한 개선이 필요한 것으로 생각된다. 따라서 본 연구에서는 국내외 내구성 관련 기준을 근거로 콘크리트 탄산화, 염분함유량, 균열, 철근부식, 표면노후도의 허용치와 평가기준에 대한 검토·분석을 통하여 수직증축형 리모델링 안전진단 내구성 평가방법의 합리화 방안을 제시하였다.

• 국제물리치료학회지
• /
• 제12권2호
• /
• pp.2308-2313
• /
• 2021

Background: Although the scapular posterior tilt movement could facilitate the lower trapezius (LT) muscle activity, no study identified the effects of the scapular posterior tilt movement on the selective activation of the LT muscle during prone shoulder extension. Objectives: To examine the influences of additional scapular posterior tilt on electromyography (EMG) of the upper trapezius (UT) and the LT muscles during prone shoulder extension. Design: Cross-sectional study. Methods: There were 15 asymptomatic male participants in this study who performed prone shoulder extension with and without scapular posterior tilt movements. For the scapular posterior tilt movements, participants performed visual biofeedback training for scapular movement using motion sensor. During the exercises, the EMG activity of the UT and LT was recorded using surface EMG system. Results: The EMG activity of the LT significantly increased during prone shoulder extension with scapular posterior tilt compared to that of general prone shoulder extension, whereas that of the UT was not significantly different between the two exercises. Moreover, scapular posterior tilt application significantly decreased UT/LT muscle activity ratio. Conclusion: Scapular posterior tilt movement may be emphasized during exercise when facilitating LT muscle activation.

• 제어로봇시스템학회논문지
• /
• 제13권8호
• /
• pp.769-776
• /
• 2007

This paper proposes the human arm motion tracking algorithm based on the signal processing for surface EMG (electromyogram) sensors attached on both upper arm and shoulder. The signals acquired by using surface EMG sensors are processed with choosing the maximum in a short period, taking the absolute value, and filtering noises out with a low-pass filter. The processed signals are directly used for the motion generation of virtual arm in real time simulator. The virtual arm of simulator has two degrees of freedom and complies with the flexion and extension motions of elbow and shoulder. Also, we show the validity of the suggested algorithms through the experiments.

• 한국의류산업학회지
• /
• 제13권1호
• /
• pp.116-129
• /
• 2011

The purpose of this study is to research on changes of body surface according to golf movements in designs of golf slacks pattern and reflect it to designs of golf slacks pattern to enhance adaptability. For the first stage of this study, length of body surface was analyzed by using 3D body shape. In second stage, analysis of wearing test of golf slacks is performed to extract major pattern design factor of golf slacks and then research patterns were designed. In third stage, 4 differently designed 1st, 2nd slacks were used for analysis of 3D Clothing air volume. The results of this research is as follow. The variation rate of body surface length according to golf swing posture resulted the longest on back swing posture and follow through posture. Waist circumference-omphalion, thigh and ankle circumference increased more than 10% of body surface during golf swing. Front waist circumference-omphalion, right waist to hip length, left waist to hip length and right back center length were decreased more than 10%. As a result of analysis on measurements of 1st slacks pattern design, waist front center getting in values, waist front center going down value, front hip width, and front crotch extension had similar industrial pattern design. Back center line angle, back crotch extension, and knee center point~back waist center point had significant differences. The designs and ease proposed for golf slacks pattern in this study are waist circumference 75.5 cm(1.8 cm, 2.38%), hip circumference 95 cm(2 cm, 2.11%), crotch length(front: -0.8 cm, -1.25%; rear: -1.8 cm, -2.83%), slacks length 96c m, gradient of C.B.L $10^{\circ}$, crotch extension (back 9.2~10.4 cm, front 3.2 cm).

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.309-312
• /
• 2008

The advent of high resolution products of surface wind and temperature derived by satellite data has permitted us to investigate ocean and atmosphere interaction studies in detail. Especially the Kuroshio extension region of the western North Pacific is considered to be a key area for such studies. We have constructed gridded products of surface wind/wind stress over the world ocean using satellite scatterometer (Qscat/SeaWinds), available as the Japanese Ocean Flux data sets with Use of Remote sensing Observation (J-OFURO). Using new data based on improved algorithm which have been recently delivered, we are reconstructing gridded product with higher spatial resolution. Intercomparison of this product with the previous one reveals that there are some discrepancies between them in short-period and high wind-speed ranges especially in the westerly wind region. The products are validated by not only comparisons with in-situ measurement data by mooring buoys such as TAO/TRITON in the tropical Pacific and the Kuroshio Extension Observation (KEO) buoys, but also intercomparison with numerical weather prediction model (NWPM) products (the NRA-1 and 2). Our products have much smaller mean difference in the study areas than the NWPM ones, meaning higher reliability compared with the NWPM products. Using the high resolution products together with sea surface temperature (SST) data, we examine a new type of relationship between the lower atmosphere and upper ocean in the Kuroshio Extension region. It is suggested that the spatial relation between the wind speed and SST depends upon, more or less, the surrounding oceanic condition.

• 한국전문물리치료학회지
• /
• 제8권1호
• /
• pp.76-88
• /
• 2001

Back extension exercises have been used for rehabilitation of the injured low back, prevention of injury, and fitness training programs. However, excessive loading on low back can exacerbate existing structural weakness. The purpose of this study was to compare muscle activity of low back muscles during back extension exercises. Twenty healthy male subject s were evaluated. Electromyographic (EMG) activities of low back muscles at L1 and L5 level were recorded during seven different back extension exercises and two reference tasks by surface EMG and saved for data analysis. Reference tasks of lifting 20% and 40% of their body weight were included for comparison. The result were as follows: 1) Single-arm extension and single-leg extension exercises on quadruped position appeared to constitute a low-risk exercise for initial extensor strengthening. 2) When arm extension was combined with contralateral leg extension on quadruped position, EMG activities of low back muscles were increased. 3) EMG activity of low back muscles was highest during the trunk extension exercises on prone position. 4) EMG activities of low back muscles during arm and leg extension exercises on quadruped position were less than those of reference task of lifting 40% of their body weight. These result s have important implications for progressive back extensor muscle strengthening exercises in patients with back pain.