• Environmental Engineering Research
• /
• v.19 no.4
• /
• pp.375-380
• /
• 2014

Macro fouling due to blue mussels (Mytilus edulis) has affected negatively on the operation efficiency and eventual system failure of offshore structures and coastal power stations. A certain range of chlorine (0.05, 0.1, 0.3, 0.5, 0.7 and 1.0 mg/L) was applied on the mussel larvae to identify the survival rate with respect to various exposure times under laboratory condition. The ciliary movement of the larvae was used to check their survival. The 1.0 mg/L of chlorine shows to 97% of larvae mortality whereas 0.7 mg/L of chlorine shows only 16% of larvae mortality. Minimum exposure times for 100% larvae mortality ranged from 300 to 20 min for increasing concentrations of chlorine (0.05~1.0 mg/L). It was found that 1 mg/L of chlorine was 4 times more efficient than 0.7 mg/L of that, and 15 times more than 0.05 mg/L of chlorine dose. Data collected and analyzed here will help plant operators to optimize chlorine dosage and its scheduling.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.64-64
• /
• 2010

This paper presents the results of changes of optical properties of front materials in crystalline PV modules. If PV modules on the outdoor, transmittance of front materials is reduced by solar light. That is UV, IR included Solar spectrum will have change the properties of glass. Therefore decrease in transmittance leads to loss of the PV modules output. All the PV modules showed the loss in Isc by 1~5% within few hors. To investigate the changes we are analyzed using spectrophotometer from raw glass to laminated glass.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.7 no.2
• /
• pp.97-102
• /
• 1987

To find out the nutrient contents of temperate grasses on the south and north slope, a field experiment was conducted with five forage species of Dactylis glomerata, Festuca arundinacea, Phleum pratense, Agrostis gigantea and Trifolium repens. It was treated by randomized block design with 4 replications and lasted from September, 1983 to October, 1986 in Suweon. The results obtained are summarized as follows: 1. Mean chemical compositions except NFE and crude fiber of the forage species on the south slope were a little more contented than that of north. But all crude components were significant difference among the species on the south and north exposure. 2. Production of TDN (total digestible nutrient), StE (starch equivalent) ME (metabolizable energy) and NEL (net energy lactation) of different grass species on the north slope were much more increased by 5-30% per ha (Dactylis glomerata by 5-876, Festuca arundinacea by 5%, Phleum pratense by 24-26% and Agrostis gigantea by 25-30%) than that of same grasses on the south, however, those of Trifolium repens were much more increased by 4 1-42% per ha in the south. 3. Mineral contents, Ca/P ratio and K/ (Ca + Mg) equivalent ratio of the species were slightly different between the exposures. But considering the factors of occuring grass tetany, those of the forage species on the north slope were better than that of same species on the south.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.399-399
• /
• 2007

Recently, it is widely studied to liquid crystal (LC) alignment using ion-beam exposure. Because conventional rubbing method has some problems such as defects from dust and electrostatic charges during rubbing process. Therefore rubbing-free techniques like ion-beam method are strongly required. We studied LC alignment by controlling ion-beam energy density and electro-optical (EO) characteristics of twisted nematic LC on the polyimide surface. In this experiment, a good uniform alignment of the nematic liquid crystal (NLC) with the ion-beam exposure on the polyimide (PI) surface was observed. In addition, it can be achieved the good EO properties of the ion-beam-aligned twisted nematic liquid crystal display (TN-LCD) on PI surface.

• The Korean Journal of Food & Health Convergence
• /
• v.4 no.3
• /
• pp.1-5
• /
• 2018

In today's technological development of human society more and more influence on the lives of biological organisms different electromagnetic radiation. Therefore, the study and analysis of the mechanisms of their effects is an urgent task. The purpose of research - the study of the primary mechanisms of interaction of photons of optical radiation with the structures of biological objects, using the laws of quantum mechanics and biophysics. Photobiological basis of the mechanism of action of EMR optical range is the energy absorption of light quanta (photons) by atoms and molecules of biological structures (law Grotgus-Draper), which resulted in the formation of electronically excited states of these molecules with the transfer of photon energy (internal photoeffect). This is accompanied by electrolytic dissociation and ionization of biological molecules. The degree of manifestation of photobiological effects in the body depends on the intensity of the optical radiation, which is inversely proportional to the square of the distance from the source to the irradiated surface. Accordingly, in practice, determine not the intensity and irradiation dose at a certain distance from the source of exposure by the exposure time.

• Analytical Science and Technology
• /
• v.32 no.4
• /
• pp.131-138
• /
• 2019

This paper reports results on the physical properties of a powder type of $Al_2O_3:C$ commonly used as a luminescence dosimeter using the LM-OSL technique. On the analysis with the general order kinetics model, the LM-OSL signal measured appeared to be composed of three components (fast, medium, slow) showing the largest area in the medium component. The photoionization cross sections of three components were distributed between $10^{-19}{\sim}10^{-21}cm^2$. The values of the thermal assistance energy were evaluated the largest in slow component and the smallest in fast component, which indicates the electrons trapped in defects attributed to slow component should be the most sensitive to thermal vibration among three components. In illumination to blue light, the fast component showed a rapid linear decay and completely disappeared after light exposure time of about 5 s. The medium component decayed with two exponential elements but the slow component did not observed any noticeable change until light exposure time of 40 s. In a dose response study, all components exhibited a linear behaviour up to approximately 10 Gy.

• International Journal of Computer Science & Network Security
• /
• v.22 no.8
• /
• pp.362-370
• /
• 2022

The assessment of specific impacts on the environment is a preventive measure for environmental protection which is based on the definition and proposal of measures that can prevent harmful effects, reduce or eliminate them. In the physical sense, vibration is the oscillating motion of an object with the effect of internal or external forces applied to it. People who touch a vibrating surface or object will feel these vibrations. In general, there are two types of vibration exposure. The first are the vibrations of the hands and arms transmitted by the held parts of tools or machinery. The second are whole-body vibrations transmitted from a seat or surface to a motorized car. The risk of injury to workers exposed to vibration varies depending on the size, frequency, type, duration of exposure, and organ affected. The purpose of this paper is to review the measurements of vibrations in the Kosovo Energy Corporation in the mine Sibovc Southwest, where coal with a rotary excavator is exploited and the evaluation of vibrations for working conditions for workers working in that environment and improving working conditions for the measurement of vibrations we have used the device Minimate DS 078, the purpose of such environmental impact assessment is to collect data and predict the harmful impacts on the environment, namely the impact on water, air, soil, life and health of as well as identify and propose measures that could prevent, reduce or eliminate altogether.

• Current Optics and Photonics
• /
• v.8 no.4
• /
• pp.382-390
• /
• 2024

Laser propagation through atmospheric disturbances is vital for applications such as laser optical communication, satellite laser ranging (SLR), laser guide stars (LGS) for adaptive optics (AO), and laser energy transmission systems. Beam degradation, including energy loss and pointing errors caused by atmospheric turbulence, requires thorough numerical analysis. This paper investigates the impact of laser beam parameters on ground-to-space laser propagation up to an altitude of 100 km using vertical atmospheric disturbance profiles from the Geochang SLR Observatory in South Korea. The analysis is confined to 100 km since sodium LGS forms at this altitude, and beyond this point, beam propagation can be considered free space due to the absence of optical disturbances. Focusing on a 100-watt class laser, this study examines parameters such as laser wavelengths, beam size (diameter), beam jitter, and beam quality (M²). Findings reveal that jitter, with an influence exceeding 70%, is the most critical parameter for long-exposure radius and pointing error. Conversely, M², with an influence over 45%, is most significant for short-exposure radius and scintillation.

• Journal of the Korean Society of Safety
• /
• v.32 no.3
• /
• pp.90-98
• /
• 2017

The purpose of this study was to examine the effect of employment type(direct employment, dispatch and service supplier) on risk factor exposure, health and satisfaction. The data of the 4th wave of Korean Working Conditions Survey (KWCS) conducted by Korea Occupational Safety and Health Agency (KOSHA) in South Korea was used. Business support service industry and manufacturing industry were selected as appropriate industries for analysis. In the final analysis, 5,865 in the manufacturing industry and 1,361 in the service support industry were included. Various variables related risk, safety, satisfaction and health such as risk factor exposure, MSDs exposure, work environment satisfaction, injury probability, dangerous work, workload, physical health problem, perceived health, positive emotions, stress, participation for decision making and experience of accident/disease were analyzed and company size and age was controled. An ANCOVA was conducted to identify significant mean differences of risk, safety, satisfaction and health related variables among direct employed workers, dispatch and service supplier workers. The results showed that all the variables except stress showed a significant difference depending on employment type in the service supply industry. In the manufacturing industry, there were significant difference in the risk factor exposure, MSDs exposure, work environment satisfaction, workload, physical health problem, perceived health, and participation depending on employment type. These results indicated that the risks are unloaded to subcontract and outsourcing company workers. Based on these results, the implications of this study and suggestions for future research were discussed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.6
• /
• pp.894-899
• /
• 2007

An experiment was conducted using a [6, 6-$^2H$]glucose isotope dilution method to determine the effects of plantain (Plantago lanceolata L.) on plasma glucose metabolism in sheep taken from a thermoneutral environment and exposed to a hot environment. The sheep were fed either mixed hay (MH) of orchardgrass (Dactylis glomerata L.) and reed canarygrass (Phalaris arundinacea L.) at a 60:40 ratio or MH and plantain (PL) at a 9:1 ratio in a crossover design for each 23-day period. In both dietary treatments the metabolizable energy (ME) and crude protein intake were designed to be isoenergetic and isoproteinous at around maintenance level. The sheep were taken from a thermoneutral environment ($20^{\circ}C$, 70% RH) and exposed to a hot environment ($28-30^{\circ}C$, 70% RH) for 5 days. The isotope dilution method using a single injection of [6, 6-$^2H$]glucose was performed on the $18^{th}$ day of the thermoneutral environment and on the $5^{th}$ day of heat exposure. Plasma glucose pool size was numerically lower (p = 0.26) during heat exposure on both dietary treatments, and numerically higher (p = 0.13) on the MH diet irrespective of environmental temperature. Plasma NEFA concentration (p = 0.01) and glucose turnover rate (p = 0.03) were decreased during heat exposure, but remained similar between diets. It could be concluded that, although no positive impact of plantain on glucose metabolism was found under the present experimental conditions (plantain constituted only 10% of basal diet), plantain herb is an alternative to MH for rearing sheep in both thermoneutral and hot environments.