• Journal of Environmental Health Sciences
• /
• v.44 no.5
• /
• pp.460-467
• /
• 2018

Objectives: The objectives of this study are to estimate the inhalation exposure level of benzene for workers using Tier 1 exposure models ECETOC TRA (European Center for Ecotoxicology and Toxicology of Chemicals Target Risk Assessment) and Stoffenmanager, and to investigate their reliability for exposure assessment in K-REACH. Methods: Two exposure scenarios, 'manufacture of benzene' and 'use as solvents,' were developed for assessment of workers' exposure to benzene. The Process Category (PROC) for ECETOC TRA was collected from the European Chemical Agency (ECHA) registration dossier, and the Activity for Stoffenmanager was converted from PROC using translation of exposure models (TREXMO). The information related to exposure, such as working duration, Respiratory Protective Equipment (RPE), Local Exhaust Ventilation (LEV), and Risk Management Measure (RMM) were classified into high, medium, and low exposure conditions. The risk was determined by the ratio of the estimated exposure and occupational exposure limits of benzene. Results: Under high exposure conditions, the worker exposure level calculated from all PROCs and Activities exceeded the risk level, with the exception of PROC 1 and Activity 1. In the medium exposure condition, PROC 8a, 8b, and 9 and Activity 3, 7, and 8 all exceeded the risk, whereas in the low condition, all PROCs and Activities were determined to be safe. As a result, action corresponding with the low exposure condition is required to reduce the risk of exposure among workers in workplaces where benzene is manufactured or used as a solvent. In addition, the predicted exposure levels derived from the exposure models were lower than measured levels. The exposure levels estimated from Stoffenmanager were more conservative than those from ECETOC TRA. Conclusions: This study demonstrates the feasibility of exposure models for exposure assessment through the example of occupational inhalation exposure assessment for benzene. For more active utilization of exposure models in K-REACH, the exact application of collected information and accurate interpretation of obtained results are necessary.

• Composites Research
• /
• v.22 no.6
• /
• pp.39-44
• /
• 2009

The effect of exposure times on the aging characteristics of carbon fiber/epoxy composite ring specimen was evaluated using an accelerating aging tester. Combined exposure conditions, such as temperature, moisture, and ultraviolet, were applied up to 3000 hours. Tensile properties and flexural properties including the effect of curvature were evaluated on the specimens subject to various exposure times through a material testing system. Their aging surfaces were observed through a scanning electron microscope. According to the results, tensile modulus was little affected by the exposure times. However, tensile strength, at the early stage of the exposure times, increased due to physical aging and curing reaction, but tensile strength slightly decreased due to degradation as the exposure times increased. The flexural modulus and flexural strength increased at the early stage of the exposure times, but slightly decreased as the exposure times increased. Aging surfaces of the specimens examined using the scanning electron microscope revealed a different morphology in various exposure times and provided useful information for identifying the degradation in mechanical properties of the composite subject to various exposure times.

• Journal of Environmental Health Sciences
• /
• v.49 no.6
• /
• pp.372-379
• /
• 2023

Background: Laundry workers are known to be exposed to organic solvents in various works including dry cleaning. Long-term exposure to organic solvents may cause adverse health effects among laundry workers. Objectives: To investigate the association between exposure to organic solvents and symptom of headache or eyestrain among laundry workers. Methods: The subjects were total 267 laundry workers who participated in the 6th Korean Working Conditions Survey (KWCS). Responses to exposure to 'inhalation of vapor from organic solvent' was categorized into two (non-exposed: rarely or absolutely not exposed during working hours; exposed: ≥1/4 working hours) or three (non-exposed; low exposure: 1/4 of the working hours; high exposure: ≥1/2 working hours) groups. Logistic regression analysis was performed to evaluate the association between exposure to organic solvents and symptom of headache or eyestrain in the last 12 months among laundry workers. Odds ratios (ORs) and the 95% confidence intervals (CIs) were calculated for experience of the symptom of headache or eyestrain with adjustment for age, sex, education, workplace size (by the number of workers), working hours per week, and current working period (year). Results: The proportions of exposure groups, i.e., non-exposed, low exposure, and high exposure, were 80.4%, 11.1%, and 8.5%, respectively. The proportion of those who had symptom of headache or eyestrain in the last 12 months was 18.7%. There was a significant association between exposure to organic solvents and experience of headache or eyestrain (OR=3.2, 95% CI=1.4~7.4). And, the proportion of those who experienced symptom of headache or eyestrain tended to increase significantly as the level of exposure to organic solvents increased (P_trend=0.002). Conclusions: Our results suggest that exposure to organic solvents are associated with symptom of headache or eystrain among laundry workers in Korea. However, further studies with more relevant design is needed to replicate the association.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.8
• /
• pp.98-104
• /
• 2010

It has been reported that the photopolymer solidification in the stereolithogrpahy process is mainly depend on the laser exposure conditions such as laser power and scanning speed. However, these researches were focused on the vertical laser exposure onto the surface of the photopolymer. In this research, we developed a mathematical model for the photopolymer solidification under the inclined laser beam exposure. Using the developed mathematical model, the photopolymer solidifications were simulated varying inclined laser exposure conditions. Developed mathematical model was in good agreement with the experimental result. This research can be applied to improve the surface roughness in the stereolithogrpahy process.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.1
• /
• pp.53-60
• /
• 2024

Compressive strength in concrete has many affecting parameters and varies with exposure conditions. Although the concrete has same mix proportions, its properties are different with exposure conditions, and sea-environment can be classified into three groups such as tidal, atmospheric, and sea submerged region particularly. In this study, compressive strength was evaluated on 7-year-cured concrete and the results from previous equations (KDS, ACI, CEB, and JSCE) were compared with them. Furthermore the strength and carbonation progress were evaluated on concrete cured for 7 years exposed to three different sea environment. Three levels of w/c (water to cement) ratio (0.37, 0.42, and 0.47) and three different exposure conditions (tidal, atmospheric, and submerged) were considered. The results from wet-cured condition are all higher than those from the previously proposed equations, and the results from different sea exposure conditions (tidal, atmospheric, and submerged region) were lower than those from wet-cured condition. A reduction of strength was evaluated with increasing w/c ratio and the minimum strength was evaluated in the sea-submerged conditions. Several experimental constants applicable to the previous equations were obtained from regression analysis since the strength change with w/c ratios were not considered in those equations. Regarding carbonation depth with different exposure conditions, higher carbonation depth clearly was observed with increasing w/c ratios, and evaluated in the order of atmospheric, submerged, and tidal region. Considerable carbonation depth was observed in submerged and tidal region due to sulfate ion and dissloved carbon dioxide as well.

• Journal of the Korean Society of Safety
• /
• v.37 no.5
• /
• pp.62-73
• /
• 2022

This study investigates the working conditions of shift workers according to age group by analyzing the sixth Korean Working Conditions Survey's data. A total of 1,323 shift workers were extracted from the dataset. Three age groups (A: 20s-30s, B: 40s-50s, C: 60s and above) were statistically compared in terms of health problems, emotional hazard exposure, work-life imbalance, and satisfaction with working conditions. Elderly shift workers (those in their 60s and above) had significantly more severe health problems and work-life imbalance, greater exposure to emotional hazards, and lower satisfaction with working conditions than young shift workers (those in their 20s-50s). The study's findings reveal the characteristics of working conditions for elderly shift workers and would be useful for improving shift workers' quality of life, as well as safety and productivity in the workplace.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.28-33
• /
• 1996

Wind-speed has much effect on the dispersion of the radioactive effluents released into the atmosphere. Accurate measurement of low wind-speeds is very important for the realistic assessment of radiation exposure. The objective of this study is to analyze the effects of different calm conditions on the radiation exposure due to the normal operation of a nuclear facility at KAERI (Korea Atomic Energy Research Institute) site. When calm condition is changed from 0.5 m/sec to 0.21 m/sec, the effects on radiation exposure show a distinct difference.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.1
• /
• pp.64-74
• /
• 2016

Objectives: The purpose of this study was to investigate whether chemical exposure among workers has relevance to dyspnea using data from the $3^{rd}$ Korea Working Conditions Survey. Methods: The research subjects were 29,711 wage workers. Chemical exposures consist of four factors, (1) breathing in vapors, fumes, dust and dirt, (2) breathing in organic solvent vapors, (3) handling or touching chemicals, and (4) secondhand smoke. Multiple logistic regression analysis was performed to examine the association between chemical exposure and dyspnea in the last 12months using proc surveylogistic in SAS 9.3 statistical software excluding people who had received a diagnosis of hypertension or obesity that can affect the respiratory distress symptoms(n=27,842). Results: Chemical exposure among workers was associated with dyspnea after adjustment for demographics and job characteristics. Prevalence of dyspnea was 4.9 per 1,000 among men and 5.8 per 1,000. Compared to a total score of 0 points of chemical exposure among workers, a total score of 1, 2-3, and 4 points tended to have increased risk of dyspnea in a dose-response manner for both men (OR=1.43, 1.93, and 4.26; P-for trend=0.002) and women(OR=1.10, 2.81, and 7.70; P-for trend=0.002). Stratified analysis by duration of current job showed that the association between chemical exposure and dyspnea tended to get stronger until 15 years and then disappeared afterwards, which reflects healthy worker survivor effect. Conclusions: We observed significant association between chemical exposure and dyspnea using the data of the $3^{rd}$ Korea Working Conditions Survey. Our results warrants providing knowledge related to chemical exposure, performing prevention activities, and creating various health policies to protect workers.

• Safety and Health at Work
• /
• v.6 no.4
• /
• pp.289-294
• /
• 2015

Background: The type of payment is one of the important factors that has an effect on the health of employees, as a basic working condition. In the conventional research field of occupational safety and health, only the physical, chemical, biological, and ergonomic factors are treated as the main hazardous factors. Managerial factors and basic working conditions such as working hours and the type of payment are neglected. This paper aimed to investigate the association of the type of payment and the exposure to the various hazardous factors as an heuristic study. Methods: The third Korean Working Conditions Survey (KWCS) by the Occupational Safety and Health Research Institute in 2011 was used for this study. Among the total sample of 50,032 economically active persons, 34,788 employees were considered for analysis. This study examined the relation between the three types of payment such as basic fixed salary and wage, piece rate, and extra payment for bad and dangerous working conditions and exposure to hazardous factors like vibration, noise, temperature, chemical contact, and working at very high speeds. Multivariate regression analysis was used to measure the effect of the type of payment on working hours exposed to hazards. Results: The result showed that the proportion of employees with a basic fixed salary was 94.5%, the proportion with piece rates was 38.6%, and the proportion who received extra payment for hazardous working conditions was 11.7%. Conclusion: The piece rate was associated with exposure to working with tight deadlines and stressful jobs. This study had some limitations because KWCS was a cross-sectional survey.

• Journal of radiological science and technology
• /
• v.42 no.1
• /
• pp.19-24
• /
• 2019

For general radiological examinations, even in the same area and the same test, the test conditions must be set differently according to the patient. However, since it is impossible to consider the body shape and conditions of patients every time in medical institutions where various patients visit, the tests are conducted by setting the AEC which automatically sets the test conditions. AEC is most commonly used in chest radiography. Therefore, the purpose of this study is to propose the improvement plans for using AEC by measuring the exposure dose and evaluating the image quality according to whether the AEC is used or not, and to provide basic data for AEC research. In the present study, images were acquired while varying tube voltage and test distance according to the use of AEC in chest radiography. The radiation dose was measured by placing the dosimeter in front of the chest phantom, and the CNR and SNR of acquired images were analyzed using Image J. The t-test was conducted for the statistical analysis and the significance was determined at the level of 95%(p<.05). As a result of this study, in the inspection distance (100cm, 140cm, 180cm) according to the use of AEC, high doses were observed when the AEC was used and there was statistically significant difference(p<.05). In the t-test to determine the difference between CNR and SNR depending on whether AEC was used or not, there was no significant difference according to the use of AEC(p>.05). Therefore, when performing chest radiography, if the radiologist establishes the appropriate examination conditions and conducts the examination by not just relying solely on AEC, it may be possible to reduce unnecessary radiation exposure to the patient.