• 한국정보통신학회논문지
• /
• 제11권2호
• /
• pp.257-264
• /
• 2007

사진을 찍을 때 카메라는 보기 좋은 사진을 얻을 수 있도록 많은 기능을 제공하고 있다. 대표적인 기능으로 자동 초점거리 조정(Auto Focus), 자동 색온도 보정(Auto White Balance), 자동 노출 조정(Auto Exposure)이 있다. 본 논문에서는 편리한 기능들 중 하나로서 새로운 자동 노출제어 시스템을 제안한다. 본 논문에서 제안하는 자동 노출제어 시스템은 가변 시상수(Variable Time Constant)를 가지는 IIR Filter를 이용한다. 먼저 노출제어의 기준을 정하기 위해서 사진에서 밝기변화와 Zone System에서 보여주는 사물의 휘도정보를 비교하여 이상적인 휘도변화 특성 그래프를 얻는다. 얻어진 이상적인 휘도 변화 그래프와 현재의 노출설정을 비교하여 적정 노출의 설정을 찾는다. 제안하는 자동 노출제어 시스템은 적정 노출을 얻을 수 있는 설정으로 조정하기 위해 기존의 마이크로 콘트롤러 등을 이용하여 구현하는 방법과 달리 IIR Filter를 사용하므로 간단한 구성을 가지며 콤팩트 이미지 센서모듈(ISM)를 구성하기 위하여 사용할 수 있다.

• 한국전자파학회논문지
• /
• 제11권7호
• /
• pp.1194-1203
• /
• 2000

1 mG부터 5 G까지 발생시킬 수 있는 소동물 실험율 60Hz 자계 발생장치를 설계하고 제작하였다. 동시에 많은 동물을 시험하기 위해서는 발생장치 내의 균일한 자계 분포 영역이 넓어야 하는데, 본 고에서는 SD-계쥐 약 50마리를 수용할수 있도록 하기 위해 소동물의 거주 공간을 장치 내부 1$\times$1$\times$1m3 크기로 하고 전체 발생장치의 크기는 1.8$\times$1.8$\times$1.8m3 입방형으로 설정하였다. 장치 내부의 자계 균일도를 검증하기 위해서 3차원 자계 계산 프로그램을 개발하였고, 이를 이용하여 거주 공간의 자계 분포가 가장 균일하게 되는 내.외곽코일의 최적 전류비 및 위치를 결정하였다. 또한 수치계산을 통한 임피던스에 근거하여 전원장치를 제작하였다. 제작된 자계 발생장치는 측정을 통하여 동물 거주 공간의 자계 최대치와 최소치의 차이가 3% 이내임을 확인할수 있었고 정밀한 소동물 자계 노출 시험용으로 사용 가능한 것으로 판단되었다.

• 한국환경보건학회지
• /
• 제48권3호
• /
• pp.131-137
• /
• 2022

Public interest has been increasing the focus on the management of exposure to pollutants and the related health effects. This study reviewed exposure assessment methodologies and addressed future directions. Exposure can be assessed by direct (exposure monitoring) or indirect approaches (exposure modelling). Exposure modelling is a cost-effective tool to assess exposure among individuals, but direct personal monitoring provides more accurate exposure data. There are several population exposure models: stochastic human exposure and dose simulation (SHEDS), air pollutants exposure (APEX), and air pollution exposure distributions within adult urban population in Europe (EXPOLIS). A South Korean population exposure model is needed since the resolution of ambient concentrations and time-activity patterns are country specific. Population exposure models could be useful to find the association between exposure to pollutants and adverse health effects in epidemiologic studies. With the advancement of sensor technology and the internet of things (IoT), exposure assessment could be applied in a real-time surveillance system. In the future, environmental health services will be useful to protect and promote human health from exposure to pollutants.

• 환경영향평가
• /
• 제14권4호
• /
• pp.195-202
• /
• 2005

The health risks from the magnetic fields exposure have been brought out difficulties in the construction of transformer substation. According to several epidemiologic studies and the relevant international organizations, magnetic fields should not exceed the exposure limits of 3mG for the people living near electric power lines. The rigid regulation of the exposure levels for the elementary school and residental areas has been established already in Switzerland and Italy. Since 1998, the environmental impact assessment system in Korea has been reviewed for power-frequency magnetic field by precautionary policies. In this study, the possible application of Prior Environmental Performance Review System for the transformer substation was reviewed from the points of the properties of the powerfrequency magnetic fields. The ranges and survey methods of the assessment for the transformer substation were proposed. The ranges of magnetic fields was between 300m to 500m for the 345kV transformer substation. It is necessary to develop further specific assessment methods for various high-voltage transformer substations.

• 한국산업보건학회지
• /
• 제33권3호
• /
• pp.280-283
• /
• 2023

Objectives: The purpose of this study was to examine the change in exposure concentration in the cleaning process after installing a local exhaust system. Methods: Dichloromethane measurement was conducted according to the KOSHA Guide (A-19-2019). Results: After the local exhaust device was installed, a total of three measurements were conducted, including temporary work environment measurements, and all of the measurements did not exceed the DCM exposure standard, but were more than 50% of the DCM Time Weighted Average((8-TWA) Conclusions: It is thought that the local ventilation system of a small business needs not only support for the initial installation cost, but also educational support for maintaining the performance of the local ventilation system and support for consumables (adsorbents, filters, etc.) that incur periodic costs.

• 치과방사선
• /
• 제25권1호
• /
• pp.51-70
• /
• 1995

The purpose of this investigation was to compare the direct digital radiographic system with film-based digital imaging system using Ektaspeed and Ektaspeed Plus film with respect to image characteristics and detectability and evaluate the sensor noise with the use of subtraction method. Direct digital radiographic system which used was Sens-A-Ray system(Regam Medical Systems, Sundsvall, Sweden) and film-based digital imaging system was composed of Macintosh II ci computer, high resolution Sony XC-77 CCD camera and intraoral x-ray film(Kodak Ektaspeed film, Kodak Ektaspeed Plus film). Images were taken by using CCD sensor of Sens-A-Ray system, Ektaspeed film and Ektaspeed Plus film with variable exposure time(0.06s, 0.1s, 0.16s, 0.2s, 0.3s, 0.4s, 0.5s, 0.6s, O.8s, LOs), 5 times at each exposure time. And then ektaspeed films and ektaspeed plus films were digitized using CCD camera. Image groups were divided into 3 groups; Sens-A-Ray group(direct digital radiographic system), Ektaspeed group and Ektaspeed Plus group (film-based digital imaging system) They were assessed by the following three aspects; image density, image contrast and detectability and sensor noise of Sens-A-Ray system was also evaluated. The results were as follow : 1. S group showed higher density than E , EP group except at the low exposure time(p<0.01). 2. S group showed higher contrast than E,EP group except at the high exposure time(p<0.01). 3. All groups showed good detectability at the each proper exposure time. Lowest exposure time which shows maximum detectability in S,EP group(0.5s) was lower than that in E group(0.6s). 4. Sensor noise of Sens-A-Ray system generally increased according to exposure time. On the basis of the above results, it was considered that Sens-A-Ray system could show higher speed, higher contrast than Ektaspeed, Ektaspeed Plus film except at too high and low exposure time and the same detectability as the conventional intraoral film.

• 방송공학회논문지
• /
• 제22권3호
• /
• pp.327-338
• /
• 2017

노출 합성은 두 장 이상의 서로 다른 노출 값을 갖는 좁은 동적 영역 영상을 합쳐 한 장의 넓은 동적 영역을 갖는 결과 영상을 생성하는 알고리듬이다. 본 논문은 블록기반의 지역적 특성을 고려한 노출 조정 기법과 개선된 채도 특성 요소를 이용해 가중치 맵을 생성하는 알고리듬을 제안한다. 제안하는 노출 조정 기법은 인간시각체계의 특성을 고려하여 입력 영상의 노출 값을 보정함으로써 노출 합성 결과 영상 내의 세밀한 부분을 효과적으로 보존한다. 개선된 채도 영상은 입력 영상 내의 포화 영역을 효과적으로 반영한 가중치맵을 생성한다. 본 논문은 기존의 대표적인 노출 합성 알고리듬과의 주관적 화질과 MEF-SSIM, 수행 시간 비교를 통해 제안하는 알고리듬의 우수성을 입증하였다.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2006년도 추계학술대회 발표 논문집
• /
• pp.132-137
• /
• 2006

With the help of the development of digital-multimedia in the middle of 1990's, FDP(Flat Panel Display) had attracted considerable attention. Collimation proximity exposure system that transfers the pattern on wafer or glass exactly using mask and light with appropriate wavelength is core process in semiconductor and liquid display element. The performances of resolution required in precision exposure system are evaluated by resolving power, depth of focus and storage area. Most of development has targeted on these three factors. The optical design including lamp house has played an important role on the performance of exposure process. In this study, we evaluate the cooling system, concerning on exposure device with mercury lamp among the kernel equipment for the production of LCD, to prevent the instability of lighting due to long term accumulation of excessive heating inside the lamp house. Numerical analysis is conducted on full-scale model. The characteristics of three-dimensional flow, pressure and temperature distribution on exposure system are graphically depicted to estimate the whole cooling system for lamp house and to establish the design criteria.

• 한국산업보건학회지
• /
• 제22권3호
• /
• pp.191-199
• /
• 2012

Objectives: The study aim was to evaluate the application of a chemical exposure assessment tool for the Korean workplace. The Ministry of Employment and Labor in Korea (KMOEL) introduced the need for workplace risk assessments in 2011, requiring the Korean chemical industry to consider both domestic and international chemical regulation policies (e.g., estimations of exposure scenarios). Exposure scenarios are required in the European Union as part of material safety data sheets (MSDS) under the Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH) system. Methods: Although many programs for the estimation of exposure have been developed worldwide, to date there is no standard for the Korean workplace. To develop programs suitable for the Korean workplace, we examined the applicability of the European Center for Ecotoxicology and Toxicology of Chemicals target risk assessment (ECETOC TRA), which is recommended by the European Chemical Agency (ECHA). Results: To investigate the applicability of the ECETOC TRA to Korean industry, this study simulated 15 industrial processes. The predicted respiratory exposures for four processes using origin input parameters were underestimated compared to the measured respiratory exposure. Using calibrated input parameters, results for two processes were underestimated compared to the measured respiratory exposure. This result suggests that the use of calibrated input parameters reduces the differences between predicted and measured respiratory exposure. Conclusions: we developed applicable exposure estimating method by modifying the ECETOC TRA program; one suggested the development of exposure estimating program that explains Korea domestic workplace exposure scenario.This study will support the introduction of exposure scenario in MSDS system and protect health of worker from hazardous chemical.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 춘계학술논문 발표대회
• /
• pp.129-132
• /
• 2007

In this study, for the establishment of the performance evaluation methods of repair material and method for reinforced concrete structure and the quality control standards of durability recovery method, the quantitative exposure data by exposure experiment under the coastal and normal atmosphere environment is accumulated and analyzed. Investigating and evaluating the result of exposure experiment during 54 months of exposure age under the coastal and normal atmosphere environment, Micro crack, swelling and spatting of surface coating material, crack of repair boundary parts and the great potential difference between repair part and non-repair part were somewhat generated. And the result shown that exposure specimen of coastal environment had lower electrode potential than exposure specimen of normal atmosphere environment.