• 제목/요약/키워드: Explosive power

검색결과 131건 처리시간 0.023초

비전기식 지연형 폭발볼트 개발 (Development of Non-Electric and Delay Explosive Bolt)

  • 이응조;김동진
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2005년도 제24회 춘계학술대회논문집
    • /
    • pp.92-95
    • /
    • 2005
  • 본 연구는 기존의 폭발볼트와는 달리 작동에 필요한 전원의 공급 없이 수행하면서, 또한 지연기능까지 포함한 비전기식 지연형 폭발볼트에 관한 것이다. 즉 비전기식 작동방법을 이용하여 전원 공급 장치를 없앨 수 있기 때문에 분리장치의 소형화가 가능해졌고, 이를 위하여 기존 폭발볼트의 작동 메카니즘과는 다른 새로운 개념의 메카니즘을 적용하였고, 또한 지연기능을 추가하기 위하여 작동메카니즘 개발과 별도로 지연장치를 개발하였다. 전원을 사용하지 않고 작동하는 착화장치를 설계하기 위하여 폭발볼트가 결합된 비행체에서 발생하는 공기의 저항력을 이용하였다. 고속으로 비행하는 발사체의 속도를 줄이고 안전한 착륙을 위한 낙하 시스템의 설계에 고려될 수 있는 장치라고 생각된다.

  • PDF

Synthesis of TiCx Powder via the Underwater Explosion of an Explosive

  • Tanaka, Shigeru;Bataev, Ivan;Hamashima, Hideki;Tsurui, Akihiko;Hokamoto, Kazuyuki
    • Metals and materials international
    • /
    • 제24권6호
    • /
    • pp.1327-1332
    • /
    • 2018
  • In this study, a novel approach to the explosive synthesis of titanium carbide (TiC) is discussed. Nonstoichiometric $TiC_x$ powder was produced via the underwater explosion of a Ti powder encapsulated within a spherical explosive charge. The explosion process, bubble formation, and synthesis process were visualized using high-speed camera imaging. It was concluded that synthesis occurred within the detonation gas during the first expansion/contraction cycle of the bubble, which was accompanied by a strong emission of light. The recovered powders were studied using scanning electron microscopy and X-ray diffraction. Submicron particles were generated during the explosion. An increase in the carbon content of the starting powder resulted in an increase in the carbon content of the final product. No oxide byproducts were observed within the recovered powders.

비전기식 지연형 폭발볼트 개발 (Development of Non-Electric and Delay-Type Explosive Bolt)

  • 이응조;김동진
    • 한국추진공학회지
    • /
    • 제9권3호
    • /
    • pp.60-65
    • /
    • 2005
  • 본 연구는 기존의 폭발볼트와는 달리 작동에 필요한 전원의 공급 없이 수행하면서, 또한 지연기능까지 포함한 비전기식 지연형 폭발볼트에 관한 것이다. 즉 비전기식 작동방법을 이용하여 전원 공급 장치를 없앨 수 있기 때문에 분리장치의 소형화가 가능해졌고, 이를 위하여 기존 폭발볼트의 작동 메카니즘과는 다른 새로운 개념의 메카니즘을 적용하였고, 또한 지연기능을 추가하기 위하여 작동 메카니즘 개발과 별도로 지연장치를 개발하였다. 전원을 사용하지 않고 작동하는 착화장치를 설계하기 위하여 폭발볼트가 결합된 비행체에서 발생하는 공기의 저항력을 이용하였다. 고속으로 비행하는 발사체의 속도를 줄이고 안전한 착륙을 위한 낙하 시스템의 설계에 고려될 수 있는 장치라고 생각된다.

Two New Correlations for Predicting Detonating Power of CHNO Explosives

  • Keshavarz, M.H.;Oftadeh, M.
    • Bulletin of the Korean Chemical Society
    • /
    • 제24권1호
    • /
    • pp.19-22
    • /
    • 2003
  • For CHNO explosives, two new correlations of the form $P_{CJ}\;=\;8.7({\alpha}T_c')^{1/2}{\rho}_0^2-5\;and\;P_{CJ}\'=\'9.5({\alpha}T_c')^1/2{\rho}_0^2-9$ have been demonstrated, which relate detonation pressure, $P_{CJ}$; combustion temperature of the explosive in gas phase, $T_c$; combustion temperature of the explosive in crystalline state, $T_c'$; and the number of moles of gaseous products per unit weight of explosive, α; at initial density of the explosive, ${\rho}_0$. Experimental and semi-empirical PM3 procedures were used for the computation of $T_c$. Detonation pressures derived in this manner have a simple form without need to use computer code.

A Study on the Nylon Wire Holding and Release Mechanism for Cube Satellites by Applying Constant Holding

  • Koo, KeonWoo
    • 항공우주시스템공학회지
    • /
    • 제15권4호
    • /
    • pp.1-6
    • /
    • 2021
  • The non-explosive holding and release mechanism is used to prevent damage to the mission component caused by explosives when the deployment structure for Cube Satellites is separated. However, among the several types available, the non-explosive holding and release mechanism system using nylon wires depend on the nylon wire knot method and tightening power of the worker. Therefore, in this study, we conducted experiments with the operation of a new holding and release mechanism system by conceptualizing the Boa System Dial, which can provide a constant tightening force regardless of worker proficiency and deploying a imitational solar panel. In this study, the process of binding and unbinding with constant tension was recorded while applying the novel non-explosive holding and release mechanism using the Boa System Dial proposed. In addition, required advances are indicated for the application of the proposed system to actual Cube Satellites.

기계식 시한 신관 KM577A1용 기폭관 저장수명 예측 (Storage lifetime estimation of detonator in Fuse MTSQ KM577A1)

  • 장일호;박병찬;황택성;홍석환;백승준;손영갑
    • 품질경영학회지
    • /
    • 제38권4호
    • /
    • pp.504-511
    • /
    • 2010
  • A fuze detonator comprising star shells is an important device so that its failure usually leads to failure of the shells. In this paper, accelerated degradation tests of RD1333 (lead azide) using temperature stress were performed, and then degradation data of explosive power for the detonator were analyzed to predict the storage lifetime of detonator. Degradation data analysis to estimate the storage lifetime is based on a distribution-based degradation process. Statistical distribution parameters of explosive power degradation measures at each time were estimated for each temperature level, and then reliability of the detonator for each accelerated temperature level was estimated using both time-varying distribution parameters and critical level of explosive power. Arrhenius model was applied to estimate storage lifetime of the detonator under the field temperature condition. Accelerated distribution-based degradation analysis to estimate storage lifetime is explained in detail, and estimation results are compared to field data of storage lifetime in this paper.

방사능 폭발물의 X-ray 영상판독에 관한 연구 (A Study on the X-ray Image Reading of Radiological Dispersal Device)

  • 정근우;박경진
    • 한국산업융합학회 논문집
    • /
    • 제27권2_2호
    • /
    • pp.437-443
    • /
    • 2024
  • The purpose of radiological Dispersal Device(RDD) is to kill people by explosives and to cause radiation exposure by dispersing radioactive materials. And It is a form of explosive that combines radioactive materials such as Co-60 and Ir-192 with improvised explosives. In this study, we tested and evaluated whether it was possible to read the internal structure of an explosive using X-rays in a radioactive explosive situation. The improvised explosive device was manufactured using 2 lb of model TNT explosives, one practice detonator, one 9V battery, and a timer switch in a leather briefcase measuring 41×35×10 cm3. The radioactive material used was the Co-60 source used in the low-level gamma ray irradiation device operated at the Advanced Radiation Research Institute of the Korea Atomic Energy Research Institute. The radiation dose used was gamma ray energy of 1.17 MeV and 1.33 MeV from a Co-60 source of 2208 Ci. The dose rates are divided into 0.5, 1, 2, and 4 Gy/h, and the exposure time was divided into 1, 3, 5, and 10 minutes. Co-60 source was mixed with the manufactured explosive and X-ray image reading was performed. As a result of the experiment, the X-ray image appeared black in all conditions divided by dose rate and time, and it was impossible to confirm the internal structure of the explosive. This is because γ-rays emitted from radioactive explosives have higher energy and stronger penetrating power than X-rays, so it is believed that imaging using X-rays is limited By blackening the film. The results of this study are expected to be used as basic data for research and development of X-ray imaging that can read the internal structure of explosives in radioactive explosive situations.

인공심장판막의 현황

  • 김형묵
    • 대한의용생체공학회:의공학회지
    • /
    • 제10권2호
    • /
    • pp.94-96
    • /
    • 1989
  • Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained.

  • PDF

이중층 라이너의 폭발 재료 온도 분포 수치해석 (Numerical Analysis of Temperature Distribution of the Explosive Material in the Double-Layer Liners)

  • 문상호;김시조;이창희;이성
    • 한국군사과학기술학회지
    • /
    • 제19권2호
    • /
    • pp.202-210
    • /
    • 2016
  • The development of new concepts of liner is of great importance to effectively neutralize the enemy's attack power concealed in the protective structure or armored vehicles. A double layer liner has a combination of two different materials, one for penetration of target and the other for explosion after penetration. Therefore, it is of great importance to understand the temperature distribution before impact which should be lower than the explosive temperature of pure explosive material of the liner used. In this study, two different liner materials were obtained using cold spray coating and these material properties were characterized by DSC experiments. Numerical computations were done and the effect of temperature distribution and changes over time at each point of the explosive material depending on the layer types of the liner were discussed and analysed in the jet state.