• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.1
• /
• pp.73-84
• /
• 2006

Hazardous Air Pollutants (HAPs) are characterized by being relatively heavier and denser than that of ambient air due to the various reasons such as higher molecular weight, low temperature and other complicated chemical transformations (Witlox, 1994). In an effort to investigate transport and diffusion from instantaneous emission of heavy gas, Lagrangian Particle Dispersion Model (LPDM) coupled with the RAMS output was employed. Both deposition process and buoyancy term were added on the atmospheric diffusion equations of LPDM, and the locations and concentrations of dense gas particle released from instantaneous single point source (emitting initially for 10 minutes only) were analyzed. The result overall shows that adding deposition process and buoyancy terms on the diffusion equation of LPDM has very small but detectable effect on the vertical and horizontal distribution of Lagrangian particles that especially transported for a fairly long traveling time. Also the slumping of dense gas can be found to be ignored horizontally compared to the advection by the horizontal wind suggesting that it was essential to couple the Lagrangian particle dispersion model coupled with the RAMS model in order to explain the dispersion of HAPs more accurately. However, during the initial time of instantaneous emission, buoyancy term play an important role on the vertical locations of dense particles for near surface atmosphere and around source area, indicating the importance of densities of HAPs in the beginning stage or short duration for the risk assessment of HAPs or management of heavy vapors during the explosive accidents.

• Journal of the Korean Institute of Gas
• /
• v.22 no.4
• /
• pp.13-26
• /
• 2018

Currently, local regulations, such as KS Code, do not clearly specify how to calculate the range of hazardous area, so the dispersion modeling program should be used to select dispersion. The purpose of this study is to present a methodology of determining the range of hazardous area which is simpler and more reasonable than modelling by using representative materials and process conditions. Based on domestic and overseas regulations that are currently in effect, variables affecting distance to LFL(Lower Flammable Limit) were selected. A total of 16 flammable substances were modelled for substance variables, process conditions variables, and weather conditions variables, and the statistical analysis selected the variables that affect them. Using the selected variables, a three-step classification method was prepared to select the range of locations subject to explosion hazard.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.6
• /
• pp.522-529
• /
• 2017

Air gun shock system is used as an alternative energy source as part of the attempt to overcome the restrictions of economical expense and environmental damage, etc., due to the use of explosives for the UNDerwater EXplosion (UNDEX) shock test. The objectivity of this study is to develop the simulation technique of air gun shock test for the design of model-scale one for the near field non-explosive UNDEX test through its verification with full-scale SERCEL shock test result. Underwater blasting response analysis of full-scale air gun shock test was carried out using highly advanced M&S (Modeling & Simulation) system of FSI (Fluid-Structure Interaction) analysis technique of LS-DYNA code, and was verified by comparing its shock characteristics and behaviors with the results of air gun shock test.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.2
• /
• pp.75-85
• /
• 2016

A pyrotechnic system consisting of donor/acceptor pair separated by a gap relies on shock attenuation characteristics of the gap material and shock sensitivity of the donor and acceptor charges. Despite of its common use, numerical study of such pyrotechnic train configuration is seldom reported because proper modeling of the full process requires precise capturing of the shock wave attenuation in the gap prior to triggering a full detonation of high explosive and accurate description of the high strain rate dynamics of the explosively loaded inert confinements. We apply a Eulerian level-set based multimaterial hydrocode with reactive flow models for pentolite donor and heavily aluminized RDX as acceptor charge. The complex shock interaction, critical gap thickness, acoustic impedance, and go/no-go characteristics of the gap test are quantitatively investigated.

• Tunnel and Underground Space
• /
• v.30 no.1
• /
• pp.98-107
• /
• 2020

In surface mining, it is very important to create a mining area for economical mining. This study examined the contribution of design factors on slope stability with different slope design and blasting conditions. The design factors were the properties of the rock, the slope angle and the bench height, and the blasting conditions were reflected at different explosive weight and distances. The safety factor of slope was calculated by shear strength reduction method through 3D modeling, and the contribution rate of rock slope was 94.8%, which is relatively higher than other design factors, slope angle 0.89%, bench height 0.58%, and blasting It is shown that it affects about 3.73%, and it can be seen that blasting at a close distance can affect the stability of the slope.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.5
• /
• pp.1-11
• /
• 2014

Sympathetic detonation (SD) of high explosives occurs when a detonating donor initiates neighboring acceptors. The present study focuses on the hydrodynamic simulation of one-on-one sympathetic detonation of 155 mm charge filled with PBXN-109. Both unbuffered and buffered SD configurations are performed while changing the distance between each charge, in order to investigate the detonation sensitivity to a donor initiation. The cause of a SD is by a shock impact for the unbuffered case at a close range, while at a distant range, blast fragment penetration is the primary cause. The buffers can reduce the incident sensitivity to a SD by reducing the strengths of shock wave and impinging fragments.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.2
• /
• pp.45-52
• /
• 2011

To improve fire-resistance of a high strength concrete against spalling under elevated temperature, fibers can be mixed to provide flow paths of evaporated water to the surface of concrete when heated. In this study, the experiment of a column under fire and mechanical loads is conducted and the material model for predicting temperature of reinforcement steel bar and mechanical behavior of fiber-mixed high strength concrete is suggested. The material model in previous studies is modified by incorporating physical behavior of internal concrete and thermal characteristics of concrete at the elevated temperature. Thermo-mechanical analysis of the fiber-mixed high strength concrete column is conducted using the calibrated material model. The performance of the proposed material model is confirmed by comparing thermo-mechanical analysis results with the experiment of a column under fire and mechanical loads.

• Explosives and Blasting
• /
• v.38 no.4
• /
• pp.26-36
• /
• 2020

With the increase of expansion and use of the underground space, the possibility of an underground explosion by terrorists is increasing. In this study, after modeling a circular tunnel excavated at a depth of 50m, an explosion load was applied to the inside of the tunnel. As for the explosion load, the explosion load of the maximum explosive amount for six types of vehicle booms proposed by ATF (Bureau of Alcohol, Tobacco, and Firearms) was calculated. For the rock mass around the circular tunnel, three types of rock grades were selected according to the support pattern suggested in the domestic tunnel design. Nonlinear dynamic analysis was performed to evaluate the influence of the ground structure by examining the surface displacement using the explosion load and rock mass characteristics as parameters. As a result of the analysis, for grade 1 rock, the influence on the uplift of the surface should be considered, and for grade 2 and 3 rocks, the influence on a differential settlement should be considered. In particular, for grade 3 rocks, detailed analysis is required for ground-structure interaction within 40m. Also, it is considered that the influence of Young's modulus is the main factor for the surface displacement.

• The Korean Journal of Franchise Management
• /
• v.7 no.2
• /
• pp.5-14
• /
• 2016

Purpose - Competitive industry structure and recent economic depression challenge a survival of Korean small- and medium-sized food franchising companies (SMFCs), albeit the explosive growth of the Korean food service industry for last few decades. Against this backdrop, it examines how these SMFCs overcome liabilities of smallness and resource scarcity to strengthen competitive advantage in the market. To tackle this, in this article we focus on corporate entrepreneurship and human resources as a knowledge-based asset for these SMFCs. Furthermore, the ratio of employee turnover is high in SMFCs. We view that such brain-drain may result in poor performance of the Korean SMFCs. As such, we pay attention to the role of organizational commitment to an organization as a solution for enhancing individual-level employees' loyalty toward their organization. Research design, data, and methodology - Our research question is to what extent corporate entrepreneurship (i.e., innovative organizational culture, organizational autonomy, and administrative innovation) affects an individual-level attitude toward the organization and, in turn, employee creativity and satisfaction in the Korean SMFCs context. We collected data from employees in SMFCs for three months. A total of 126 valid questionnaires were collected, and analyzed the data using partial least squares path modeling. Results - The reliable and valid measurement model feed into testing the structural model. Our findings suggest that innovative organizational culture and organizational autonomy positively affect employee commitment. Particularly, organizational autonomy has a greater effect than innovative culture on employee commitment. However, the relationship between administrative innovation and employee commitment is not significant. We also find that employee commitment positively affects both employee creativity and satisfaction. Conclusions - Our contribution to the existing franchising business and management literature is twofold. First, the conceptual model includes three antecedents in the organizational entrepreneurship dimension to organizational commitment. Second, we conceptualize organizational commitment as employee commitment, and validate its impact on employee creativity and job satisfaction at an individual performance level. Overall, this article suggests that it is critically important for the Korean SMFCs to develop corporate entrepreneurship in order to facilitate employees' positive attitudes toward their organizations.

• Korean Security Journal
• /
• no.9
• /
• pp.201-235
• /
• 2005

This study is designed to contribute for development of Private Security Business by fact-finding in instruction and training of private security guard serviced in this realm and domestic and foreign guard service and modeling effective and rational instruction and training program based on drawn problem. For this study, basically I collected and analyzed documents, theses, and papers of the inside and outside of the country. For practical use of data, I used materials of private security related institutes and police agency. And for private security educating training programs of the inside and outside of the country, I collected materials on internet, and with the help of police agency and interpol. For korean private security company's educating training programs, I made a study with the interview of private security company's businessmen. This study's conclusion is as follows. In a domestic private security enterprise, when set theory instruction minimize instruction and training program and must set up instruction and training program as practical affairs center enemy instruction, and theory instruction must be composed for instruction me that it is connected to practical affairs instruction too. The instruction course of private security guard instruction and training program composed with a security outline, a security plan, an information-gathering, civilian expenses, a security way, terror and terrorism, a related law, security trial, electronic security, a security analysis technique, company introduction, instruction and training program about a professional tube with theory instruction. Practical affairs instruction composed with the selection and a preventive security, close contact attendance security, vehicle security, security driving the security martial arts and self-protection liquor, first aid, security equipment, a gun and shooting, a security protocol, customer satisfaction, facilities security and expenses, a fire fighting instruction, teamwork training, explosive and a dangerous substance, physical strength, a documentation practical affairs, service, instruction and training program about foreigh language instruction.