• Metals and materials international
• /
• 제24권6호
• /
• pp.1327-1332
• /
• 2018

In this study, a novel approach to the explosive synthesis of titanium carbide (TiC) is discussed. Nonstoichiometric $TiC_x$ powder was produced via the underwater explosion of a Ti powder encapsulated within a spherical explosive charge. The explosion process, bubble formation, and synthesis process were visualized using high-speed camera imaging. It was concluded that synthesis occurred within the detonation gas during the first expansion/contraction cycle of the bubble, which was accompanied by a strong emission of light. The recovered powders were studied using scanning electron microscopy and X-ray diffraction. Submicron particles were generated during the explosion. An increase in the carbon content of the starting powder resulted in an increase in the carbon content of the final product. No oxide byproducts were observed within the recovered powders.

• 한국추진공학회지
• /
• 제20권2호
• /
• pp.67-74
• /
• 2016

폭발볼트는 고폭약를 사용하는 분리장치의 하나로서 폭발볼트의 내부에서 형성되는 폭압 및 충격파에 의해 분리된다. 이러한 메커니즘을 갖는 폭발볼트는 분리시 생성되는 충격파 및 파편형성 최소화되도록 설계되어야 할 것이다. 본 연구에서는 폭발볼트 및 볼트를 구속하는 구속물과의 거리(Air gap)을 변수로 두어 분리시험을 수행하였다. 이때 Air gap 따른 분리유무 및 분리 형상을 확인 하였고, 가속도 센서를 이용하여 구속물의 전달되는 Pyro-shock를 측정하였다. 또한 ANSYS Autodyn 프로그램을 이용하여 폭발볼트의 분리거동을 해석하였다. 실험 및 해석으로부터 폭발볼트와 구속물 사이의 Air gap 크기에 따른 폭발볼트의 분리거동에 미치는 영향을 확인하였고 특정 볼트에 한해서 최적의 폭발볼트의 구속환경을 설정하였다.

• 한국산업융합학회 논문집
• /
• 제27권2_2호
• /
• pp.437-443
• /
• 2024

The purpose of radiological Dispersal Device(RDD) is to kill people by explosives and to cause radiation exposure by dispersing radioactive materials. And It is a form of explosive that combines radioactive materials such as Co-60 and Ir-192 with improvised explosives. In this study, we tested and evaluated whether it was possible to read the internal structure of an explosive using X-rays in a radioactive explosive situation. The improvised explosive device was manufactured using 2 lb of model TNT explosives, one practice detonator, one 9V battery, and a timer switch in a leather briefcase measuring 41×35×10 cm³. The radioactive material used was the Co-60 source used in the low-level gamma ray irradiation device operated at the Advanced Radiation Research Institute of the Korea Atomic Energy Research Institute. The radiation dose used was gamma ray energy of 1.17 MeV and 1.33 MeV from a Co-60 source of 2208 Ci. The dose rates are divided into 0.5, 1, 2, and 4 Gy/h, and the exposure time was divided into 1, 3, 5, and 10 minutes. Co-60 source was mixed with the manufactured explosive and X-ray image reading was performed. As a result of the experiment, the X-ray image appeared black in all conditions divided by dose rate and time, and it was impossible to confirm the internal structure of the explosive. This is because γ-rays emitted from radioactive explosives have higher energy and stronger penetrating power than X-rays, so it is believed that imaging using X-rays is limited By blackening the film. The results of this study are expected to be used as basic data for research and development of X-ray imaging that can read the internal structure of explosives in radioactive explosive situations.

• 대한기계학회논문집B
• /
• 제34권12호
• /
• pp.1051-1060
• /
• 2010

고화 입자 크기의 관점에서 TROI 용융물-냉각수 반응 실험의 결과에 대한 물질 효과를 분석하였다. 고화 입자 크기를 분석하면 용융물-냉각수 반응에서 초기 조건, 혼합, 폭발을 기적으로 해석할 수 있다. 증기 폭발이 발생한 경우와 폭발이 발생하지 않는 경우의 고화 입자 크기를 분석한 결과 증기 폭발이 발생한 경우에는 미세 입자가 많고 비교적 큰 입자는 적은 것으로 나타났다. 또한, 혼합 과정에 대한 정보를 보존할 수 있는 증기 폭발이 발생하지 않은 용융물-냉각수 반응을 이용하여 용융물 입자 크기에 대한 물질 효과를 분석하였다. 증기 폭발이 잘 발생하는 용융물은 증기 폭발에 참여할 수 있는 큰 입자를 많이 포함하고 있었고, 증기 폭발이 잘 발생하지 않는 용융물은 증기 폭발보다는 냉각되기 쉬운 작은 입자 혹은 미세 입자를 많이 포함하고 있었다.

• 한국군사과학기술학회지
• /
• 제16권6호
• /
• pp.857-866
• /
• 2013

This paper is concerned with the material properties of functional high explosive(FHX) simulant at various strain rates ranging from $10^{-4}/sec$ to $10^1/sec$. Material properties of FHX at high strain rates are important in prediction of deformation modes of FHX in a warhead which undergoes dynamic loading. Inert FHX stimulant which has analogous mechanical properties with FHX was utilized for material tests due to safety issues. Uniaxial tensile tests at quasi-static strain rates ranging from $10^{-4}/sec$ to $10^{-2}/sec$ and intermediate strain rates ranging from $10^{-1}/sec$ to $10^1/sec$ were conducted with JANNAF specimen using a tensile testing machine, INTRON 5583, and developed high speed material testing machine, respectively. Uniaxial compressive tests at quasi-static strain rates and intermediate strain rates were conducted with cylindrical specimen using a dynamic materials testing machine, INSTRON 8801. And cyclic compressive loading tests were performed with various strain rates and strains. Deformation behaviors were investigated using captured images obtained from a high-speed camera.

• 화약ㆍ발파
• /
• 제36권1호
• /
• pp.20-33
• /
• 2018

국부손상 구조물은 내 외부에서 발생하는 비정상 하중에 의해 구조물 일부가 구조적 기능을 상실하여 재사용이 불가능한 구조물이다. 비정상 하중의 발생 원인으로는 자연재해와 인공재해로 대별되며 이러한 비정상 하중에 의해 발생한 국부손상 구조물은 추가적인 2차 붕괴의 위험요소들을 내재하고 있어 신속한 전면해체가 요구된다. 본 시공사례는 건설실패 및 태풍으로 피해를 입은 필리핀의 철골 트러스 구조의 교량에 대해 발파해체를 적용한 사례이다. 발파해체를 위해 성형폭약의 사용이 필요하나 현지에서 수급이 불가하여 장약용기를 제작한 후 용기 속에 에멀전계열 폭약을 충전하여 발파해체에 적용하였다. 발파해체 결과 교량의 중앙부가 수직 자유낙하하고, 교량 끝단이 지지부를 중심으로 회전하면서 자유낙하 하였다. 교각 및 주변에 피해가 발생하지 않았으며, 발파 후 철거대상부의 파쇄 상태는 매우 양호하였다.

• 한국전산구조공학회논문집
• /
• 제24권2호
• /
• pp.133-140
• /
• 2011

대형 구조물에 주로 사용되는 고강도 콘크리트는 화재 시 폭렬이 발생하여 구조물의 심각한 손상을 초래한다. 최근 고강도 콘크리트의 폭렬현상을 감소시켜 구조물의 내화성능을 확보하기 위한 다양한 연구가 진행되고 있으며, 본 논문에서는 섬유를 혼입한 고강도 콘크리트에 대한 내화해석 모델을 제시하였다. 섬유의 거동 및 고온에서의 콘크리트 내부의 물리적인 현상을 고려하여 수정한 고강도 콘크리트의 재료모델을 섬유혼입 고강도 콘크리트의 재료모델로 선택하였다. 수정된 재료모델을 이용하여 얻은 섬유혼입 고강도 콘크리트의 내화해석 결과를 실험결과와 비교하였고, 섬유혼입 고강도 콘크리트 재료모델을 제안하였다.

• 한국군사과학기술학회지
• /
• 제5권3호
• /
• pp.56-61
• /
• 2002

The hexanitrohexaazaisowurtzitane(HNIW) is a polycyclic caged nitramine oxidizer. For most existing weapons systems, the most critical ingredient in explosive and propellant applications is the oxidizer, HNIW, with its increase in performance output and energy capabilities for future in explosive and propellant systems. Two new polyacylhexaazaisowurtzitanes were synthesized. Pentaacetylhexaaza-isowurtzitane(PAIW) or pentaacetylformylhexaazaisowurtzitane(PAFIW) can be a precursor in the preparation of HNIW, recently developed highly energetic material.

• 한국안전학회지
• /
• 제27권3호
• /
• pp.63-70
• /
• 2012

In the hazardous areas where explosive gases, vapor or mists exist, electrical apparatus and installations must be the explosion-proof construction to prevent or limit the danger of the ignition of potentially explosive atmosphere. In Korea, nine types of protection have been specified in the government regulations at present: flameproof enclosure, pressurization, oil immersion, increased safety, intrinsic safety, non-incendive, powder filling, encapsulation, and special types. Among these types, the intrinsic safety has the construction which limit or by-pass igniting the electric energy using electronic devices. This type has lots of merits but at the same time requires a high-degree of technology. In this paper, we investigated several dominating factors which affect the minimum ignition energy; this energy plays a very important role in design and evaluation of the intrinsic safety type electrical apparatus. Electrode material, which is one of the most important factors, was intensively studied for the five sorts of material(Al, Cd, Mg, Sn, and Zn) with performing experiment in a low-voltage inductive circuit using IEC-type(International Electro-technical Commission) spark apparatus. The experimental results show that the minimum ignition energy of electrode material is varied: highest in Cd and lowest in Sn. We also confirmed the effect of electrode make-and-break speed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.461-464
• /
• 2006

Recently, as structures become bigger and higher, it is needed that high strength, high flow and high durability concrete. Demanding of High performance concrete that equality is maintained without material separation while flow, strength is increased by using low W/C rate and admixture, carbonation does not occur because of dense filling and has high durability is increasing rapidly. Because this high performance concrete is superior to general concrete in workability and durability, it is widely used in many construction and engineering works fields. However, it is reported that when it was exposed in fire, violent explosive spalling would be happened. Therefore, the purpose of this study evaluates explosive spalling properties of fire damaged high performance concrete according to the heating time.