• International Journal of Advanced Culture Technology
• /
• 제7권3호
• /
• pp.158-165
• /
• 2019

Knowledge based system includes tools for constructing, testing, validating and refining the system along with user interfaces. An important issue in the design of a complete knowledge based system is the ability to produce explanations. Explanations are not just a series of rules involved in reasoning track. More detailed and explicit form of explanations is required not only for reliable reasoning but also for maintainability of the knowledge based system. This requires the explanation mechanisms to extend from knowledge oriented analysis to task oriented explanations. The explicit modeling of problem solving structures is suggested for explanation generation as well as for efficient and effective reasoning. Unlike other explanation scheme such as feedback explanation, the detailed, smaller and explicit representation of problem solving constructs can provide the system with capability of quality explanation. As a key step to development for explanation scheme, the problem solving methods are broken down into a finer grained problem solving primitives. The system records all the steps with problem solving primitives and knowledge involved in the reasoning. These are used to validate the conclusion of the consultation through explanations. The system provides user interfaces and uses specific templates for generating explanation text.

• 한국과학교육학회지
• /
• 제25권5호
• /
• pp.595-602
• /
• 2005

이 연구의 목적은 과학학습에서 가설 생성력 향상에 미치는 삼원귀추모형(TAM)의 적용 효과를 검증하는 것이다. 이를 위해 TAM의 가설 생성 절차에 따른 가설 생성 활동 10개와 전통적인 방법에 따른 가설생성활동 10개를 개발하여 각각26명의 고등학생으로 구성된 TAM 집단과 27명의 전통 집단에 투입하였다. 가설 생성 활동 10개가 투입되는 과정에서 4개의 활동에서 학생들이 생성한 최종 가설의 설명도를 평가하였다. 또한 가설 생성력의 향상 정도를 검증하기 위해서 과학 지식 생성력 검사 A형과 B형을 사전과 사후에 각각 투입하여 연구 대상 학생들의 가설 생성력을 검사하였다. 연구 결과 TAM 집단이 생성한 가설의 설명도가 전통 집단의 가설보다 통계적으로 의미 있는 수준에서 높았다. 가설 생성력 검사에서는 TAM 집단과 전통 집단의 검사 점수가 사전 검사에서는 통계적으로 유의미한 수준에서 차이가 없었으나 사후에는 TAM집단이 의미 있게 높았다. 따라서 TAM을 적용한 가설 생성 활동은 전통적인 방법보다 가설 생성력 향상에 효과적이라고 할 수 있다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.334-337
• /
• 2006

Generally, fragility curve has been used in predicting failure of structures due to seismic actions. In this research, the method of drawing fragility curve has been applied to evaluating success/failure of structures and satisfactory/unsatisfactory of concrete mixture performance based on material parameters. In the paper, a detailed explanation of the procedure of drawing fragility curve based on material parameter has been introduced. Fragility curve generating procedure includes generation of virtual data points from limited number of actual data points by bell curve implementation, determination of success/failure status of each data point by assigned criterion, and completion of final fragility curve. For practical applications, workability of concrete mixture content based on "unit water" has been used to obtain fragility curve. Detailed explanation of fragility curve drawing procedure for material parameters is presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.29-30
• /
• 2008

This paper defines a concept of "protectability" for the performance evaluation of distance relay considering its sensitivity and selectivity. The paper starts from the probabilistic modeling of the errors, and based on this model, a detailed explanation of protectability calculation for each zone of the distance relay is presented. An effect of the Weighting Rate and the Measurement Deviation on the protectability evaluation is also given. By considering this effect, the optimization of relay setting can be realized. The proposed method is applied to a typical model system to show its effectiveness.

• 한국초등과학교육학회지:초등과학교육
• /
• 제25권3호
• /
• pp.257-270
• /
• 2006

The purpose of this study was to develop elementary students' ability to generate hypothesis knowledge through knowledge generation learning in science. The learning program consisted of a series of 28 activities to generate hypotheses in science. Eighty 6th grade students participated in the study and were divided into experimental and control groups. The experimental group was administered a program geared towards hypothesis generation learning and the control group was administered a program aimed at hypothesis expository learning in elementary science. After using the respective programs, subjects in both groups were tested in terms of their abilities in abductive knowledge generation and administered a descriptive self-report regarding their generation of hypotheses. Two of the 28 activity program worksheets in the experimental group were analyzed in terms of the quality and process of students' hypothesis generation. The results were as follows: 1) The experimental group showed significantly higher scores in terms of scientific knowledge generation (i.e. abductive knowledge generation) than the control group. 2) The degree of hypothesis explanation in the experimental group was significantly higher than in the control group in terms of the quality of the generated hypotheses. In addition, students in the experimental group generated more varied and valid knowledge than the control group in terms of sub-knowledge of hypothesis generation. Therefore, it can be argued that this program for hypothesis knowledge generation in elementary science students was effective in the generation of hypothesis knowledge.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 학술대회 논문집
• /
• pp.295-297
• /
• 2003

Cryogenic systems is requirement for the operation of HTS power cables. In general, HTS power cables require temperature below 77K, a temperature that can be achieved from the liquid nitrogen or sub-cooled LN2. HTS power cable is needed for sufficient refrigeration to overcome its low temperature heat loading. This loading typically comes in two forms : (1) heat leaks from the surroundings and (2) internal heat generation. This paper is a explanation for the cooling test of 10m HTS power cable.

• 전기학회논문지P
• /
• 제64권1호
• /
• pp.1-6
• /
• 2015

Factors that have influence on solar power generation are specified into three aspects such as meteorological, geographical factors as well as equipment installation. Meteorological factors influence the most among the three. Insolation, sunshine hours, and cloud directly influence on solar power generation, whereas temperature and wind speed have impacts on equipment installation. This paper provides explanation over temperature-wind speed equation by calculating influence of temperature and wind speed on equipment installation. In order to conduct a research, pyranometer, anemometer, air thermometer, module thermometer are installed in 2MWp solar power plant located in South Cholla province, so that real-time meteorological data and generating amount can be analyzed through monitoring system. Besides, if existing and new methods are applied together, accuracy of prediction for generating amount is improved.

• 대한디지털의료영상학회논문지
• /
• 제15권2호
• /
• pp.25-30
• /
• 2013

The purpose of this study was to provide information about exhibits for nuclear energy in science museums. This analysed form and content of exhibits of science museums. The subjects were exhibits of 3 science museums; Seoul science park, Seoul national science museum, Gwachen national science museum. The research results were as follows: First, 3 science museums had similar methods of exhibits and types of explanations because of speciality of theme. 3 science museums had mostly fixed exhibit. Panel was the most types of explanations in 3 science museums. Second, 3 science museums had similar contents of exhibits. They dealt with nuclear power generation and radiation. However, Some parts such as radioactive waste, nuclear fusion generation had different. This study suggests that exhibits for nuclear energy of science museums use a variety of methods and types of explanation. Also, science museums need to increase exhibits for nuclear energy.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 1999년도 제1회 학술대회논문집(KIASC 1st conference 99)
• /
• pp.69-72
• /
• 1999

During the fast current and field ramp up experiment with CICC (Cable-In-Conduit Conductor) non-insulated 3 strand superconducting magnet, the unbalanced current distribution associated with the loop current has been obtained directly from the shunt resistor voltage data. To explain the generation of the loop current during the current ramp up, the steady-state three strand loop current model was proposed. This model gives an explanation for the relation between the loop current and the relation between the loop current and the twist geometry of the strands. According to this model, the twist geometry of the strand has significant influence on the generation of the loop current especially in the large superconducting magnet.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.627-630
• /
• 2002

In the present study a mesh generation program is developed for the flow analysis of industrial mixers. With this program one can select various design parameters such as impeller types, vessel type, number of baffles, number of blades, blade pitched angle, stages of impeller, rotational speed etc. Post processing capabilities are also imbedded in the program. Along with brief explanation of the program, examples of flow simulation for various type of mixers by using the program are also presented to show effectiveness of the program. It is expected that this program can be used to understand the effect of design parameters on the performance of particular type of the mixer, and hence to achieve the optimal design.