• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.865-867
• /
• 2009

본 논문에서는 서명에서 생성되는 속도 성분(방향 정보, 거리 정보)에서 방향 정보만을 특징 정보로 하여 오류율에 영향을 주지 않으면서 처리속도를 개선하였으며, 특징 정보 크기도 크게 줄일 수 있었다. 이를 위해 실험결과를 토대로 하여 통계적 방법 T-test를 이용하여 분석하였다.

• ETRI Journal
• /
• 제41권5호
• /
• pp.599-607
• /
• 2019

Although iris recognition verification is considered to be the safest method of biometric verification, studies have shown that iris features may be illegally used. To protect iris features and further improve the security of iris recognition and verification, this study applies the Gaussian and Laplacian mechanisms and to hide iris features by differentiating privacy. The efficiency of the algorithm and evaluation of the image quality by the image hashing algorithm are selected as indicators to evaluate these mechanisms. The experimental results indicate that the security of an iris image can be significantly improved using differential privacy protection.

• 한국지반신소재학회논문집
• /
• 제10권4호
• /
• pp.93-103
• /
• 2011

극한지에 적합한 지반구조물의 설계를 위해서는 일반적으로 영구동토지반의 공학적 특성에 대한 고려가 필요하다. 동상현상은 가장 대표적인 동토지반의 공학적 특성으로, 구조물 설계에 있어서 동착 및 크리프 현상과 함께 주요한 설계정수로서 고려된다. 그러므로 극한지 지반구조물 설계에 관한 연구를 위해서는 동상현상에 대한 기초적 연구가 선행되어야 한다. 이미 다양한 동상 관련 실험장비가 개발되어 연구에 활용되고 있지만, 기존의 동상 연구를 위한 실험장비들은 기초의 설계정수로서 동상현상을 분석하기에는 한계점이 나타난다고 판단된다. 따라서 본 논문에서는 동상현상을 비롯하여 토사의 동결현상을 보다 면밀히 분석할 수 있도록 개발된 실내 동결 실험장비를 소개하고, 장비의 활용성을 검증하기 위한 실내실험 결과를 제시한다. 검증 실험결과로부터, 개발된 고효율 동결실험장비의 다양한 동결현상 모사성능과 동상시험에의 활용 가능성을 검증하였다.

• 한국공작기계학회논문집
• /
• 제12권2호
• /
• pp.23-30
• /
• 2003

It is very important to detect and evaluate the surface or subsurface flaws because of their influences on mechanical properties of materials. Rayleigh wave and creeping wave are commonly used for the detection of surface and subsurface flaws. These techniques, however, have following problems. Each amplitudes are remarkably affected by the surface condition and evaluation of echo pattern is usually difficult because shear wave mode propagate in the material at the same time. On the other hand, surface SH-wave which is horizontally polarized shear wave traveling along near surface layer is an attractive technique for the surface or subsurface material characterization and this technique is useful to solve the problems mentioned above. In this paper, The stability and transmission coefficient of SH waves through a viscous fluid layer is theoretically studied and simulated. Its results agreed well with the theoretical expectation for the experimental verification. These experimental results show that viscosity of couplants, thickness of couplant and surface roughness are closely related to transfer efficiency in surface SH angle beam method.

• 한국정밀공학회지
• /
• 제19권6호
• /
• pp.70-76
• /
• 2002

Effectiveness of corrective machining algorithm is verified experimentally in this paper by performing corrective machina work practically to single side and double sides hydrostatic tables. Lapping is applied as machining method. Machining information is calculated from measured motion errors by applying the algorithm, without information on rail profile. It is possible to acquire 0.13$\mu$m of linear motion error, 1.40arcsec of angular motion error in the case of single side table, and 0.07$\mu$m of linear motion error, 1.42arcsec of angular motion error in the case of double sides table. The experiment is performed by an unskilled person after he experienced a little of preliminary machining training. Experimental results show that corrective machining algorithm is very effective, and anyone can improve the accuracy of hydrostatic table by using the algorithm.

• 한국정밀공학회지
• /
• 제32권5호
• /
• pp.455-461
• /
• 2015

This paper deals with an experimental verification of a temperature-dependent power loss model of a DC/DC converter in severe temperature conditions. The power loss of a DC/DC converter is obtained by summing the losses by the components constituting the converter including switching elements, diodes, inductors, and capacitors. MIL-STD-810F stipulates that any electronic devices must be operable in the temperature ranging from $-50^{\circ}C$ to $70^{\circ}C$. We summarized the temperature-dependent loss models for the converter components. A SEPIC-type converter is designed and built as a target. Using a constant-temperature chamber, a test rig is set up to measure the power loss of the converter. The experimental results confirm the validity of the loss model within 4.5% error. The model can be useful to predict the efficiency of the converter at the operating temperature, and to provide guidelines in order to improve the efficiency.

• International Journal of Precision Engineering and Manufacturing
• /
• 제5권3호
• /
• pp.62-68
• /
• 2004

Effectiveness of a corrective machining algorithm, which can construct the proper machining information to improve motion errors utilizing measured motion errors, is verified experimentally in this paper, Corrective machining process is practically applied to single and double side hydrostatic bearing tables. Lapping process is applied as a machining method. The machining information is obtained from the measured motion errors by applying the algorithm, without any information on the rail profile. In the case of the single-side table, after 3 times of corrective remachining, linear and angular motion errors are improved up to 0.13 $\mu\textrm{m}$ and 1.40 arcsec from initial error of 1.04 $\mu\textrm{m}$ and 22.71 arcsec, respectively. In the case of the double-side table, linear and angular motion error are improved up to 0.07 /$\mu\textrm{m}$ and 1.42 arcsec from the initial error of 0.32 $\mu\textrm{m}$ and 4.14 arcsec. The practical machining process is performed by an unskilled person after he received a preliminary training in machining. Experimental results show that the corrective machining algorithm is very effective and easy to use to improve the accuracy of hydrostatic tables.

• 한국정밀공학회지
• /
• 제21권5호
• /
• pp.73-82
• /
• 2004

This paper presents the study on damage diagnosis of an intelligent cantilevered beams using PZT actuator and PVDF sensor This study provides the theoretical and experimental verification to examine structural damage. Time domain analysis for the non-destructive detection of damage is presented by parameterized partial differential equations and Galerkin approximation techniques. The time histories of the vibration response of structure were used to identify the presence of damage. Furthermore, this systematic approach permits one to use the piezomaterials to both excite and sense the vibration of structures. We also carried out the experimental verification about reliability of theoretical methods fur detecting the damage of a composite beam with PZT actuator and PVDF sensor. Experimental results are presented from tests on cantilevered composite beams which is damaged at different location and different dimensions. The results were compared with the simulation results. Good agreement between the results was found for the time shifts and amplitude difference in transients response of the cantilevered beam.

• Structural Engineering and Mechanics
• /
• 제57권5호
• /
• pp.877-895
• /
• 2016

This paper is concerned with the analytical derivation of natural sloshing frequencies of liquid in annular cylindrical tank and its verification by experiment. The whole liquid domain is divided into three simple sub-regions, and the region-wise linearized velocity potentials are derived by the separation of variables. Two sets of matrix equations for solving the natural sloshing frequencies are derived by enforcing the boundary conditions and the continuity conditions at the interfaces between sub-regions. In addition, the natural sloshing frequencies are measured by experiment and the numerical accuracy of the proposed analytical method is verified through the comparison between the analytical and experimental results. It is confirmed that the present analytical method provides the fundamental sloshing frequencies which are in an excellent agreement with the experiment. As well, the effects of the tank radial gap, the bottom flow gap and the liquid fill height on the fundamental sloshing frequency are parametrically investigated.

• 한국정보통신학회논문지
• /
• 제14권3호
• /
• pp.613-620
• /
• 2010

화자인증 시스템은 훈련 환경과 인식 환경이 다른 경우 인식 성능이 크게 저하된다. 이러한 훈련과 인식 환경의 불일치는 다양한 잡음과 상이한 채널 환경 때문이다. 본 논문은 화자인증 시스템의 강인성 개선을 위하여 음성신호의 위상에 기반한 특정 추출 기법을 제안한다. 이 방법은 음성신호의 위상으로부터 순시 주파수를 계산하여 대역별로 순시 주파수를 모두 모아 구한 히스토그램으로부터 특징 계수를 추출한다. 이 특징 파라미터를 적용한 결과 조 용한 환경뿐만 아니라 잡음환경 그리고 채널 왜곡 환경에서도 화자인증 시스템의 성능이 개선됨을 알 수 있다.