• 소성∙가공
• /
• 제8권5호
• /
• pp.520-526
• /
• 1999

In this study a practical formula based on the experime수 랙 the estimation of load in the non-circular tube extrusion with the mandrel is proposed by using the effective extrusion ratio. Through some experiments for the several shaped sections, the coefficients of the empirical equation are determined by ticine as a model material at room temperature. The proposed empirical formula for the estimation of extrusion load will be applicable to the non-steady state as well as steady state for the extrusion of various shaped tubes from hollow billets.

• 대한전자공학회논문지
• /
• 제24권5호
• /
• pp.740-746
• /
• 1987

In calculating resonant frequencies of a microstrip resonator the effect of the stray field at resonator edges has been neglected in most publications. The formula for resonant frequencies therefore provided inaccurate results. In the paper the effective dimension and the dynamic dielectic constant of a resonator are defined and obtained for more accurate resonant frequencies and qualty factor by including the effect of stray fields. Theoretical results obtained from the new formula show good agreement with experimental results. In addition, the effect on resonant modes of the distance and coupling angle between the microstrip line and the resonator is also observed.

• 한국기계가공학회지
• /
• 제20권11호
• /
• pp.92-99
• /
• 2021

Agricultural tractors drive and operate both off-road and on-road. Tire-road interaction significantly affects the tractive performance of a tractor, which is difficult to predict numerically. Many empirical models have been developed to predict the tractive performance of tractors using the cone index, which can be measured through simple tests. However, a magic formula model that can determine the tractive performance without a cone index can be used instead of traditional empirical models as the cone index cannot be measured on asphalt roads. The aim of this study was to predict the tractive performance of a tractor using the magic formula tire model. The traction force of the tires on an asphalt road was measured using an agricultural tractor. The dynamic wheel load was calculated to derive the coefficients of the traction-slip curve using the measured static wheel load and drawbar pull of the tractor. Curve fitting was performed to fit the experimental data using the magic formula. The parameters of the magic formula tire model were well identified, and the model successfully determined the coefficient of traction of the tractor.

• 한국소음진동공학회논문집
• /
• 제22권1호
• /
• pp.29-37
• /
• 2012

This paper is concerned with the natural vibration characteristics of a rectangular plate with a rectangular hole in contact with the water. The addressed problem was solved by using the Rayleigh-Ritz method combined with the Green function method. This study presents the numerical approach, numerical results and experimental results. In addition, the validity of the approximate formula which mainly depends on the so-called non-dimensionalized added virtual mass incremental factor and the natural mode shape change due to the presence of the water were investigated. Experiments were also carried out to validate theoretical results. The theoretical results are in good agreement with the experimental results. It was found that the effect of a square hole on the natural frequencies of the square plate in contact with water is different from the effect of a square hole on the natural frequencies of the square plate in air and the approximate formula can predict lower natural frequencies in water with a good accuracy.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1998년도 유체기계 연구개발 발표회 논문집
• /
• pp.91-96
• /
• 1998

The broadband noise generated aerodynamically from a two-bladed axial flow fan has been measured and compared to the result of a self-noise prediction method. The prediction scheme is based on the experimental data set acquired from a series of aerodynamic and acoustic tests of two and three-dimensional airfoil blade sections. For low blade loading case the comparison showed a reasonably good agreement, but as the loading becomes larger the empirical formula overpredict the sound pressure level at high frequency range. This is probably due to the use of stationary wing data for the prediction of rotating blade case, which will be quite different in their vortex strength at the blade tip.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 가을 학술발표회 논문집
• /
• pp.220-225
• /
• 1993

This paper is an experimental study on shear capacity of the high strength lightweight reinforced concrete beams with shear-depth ratio between 1.5 and 2.5. Thirteen T & rectangular beams were tested to determine their diagonal cracking and ultimate shear capacity. The major variables are shear span-depth ratio (a/d=1.5, 2.0, 2.5), concrete compressive strength(f'c=210, 24., 270㎏/㎠) and tensile steel ratio( =0.6, 1.2%). Based on results obtained from experiment of high strength lightweight reinforced concrete Beam & normal concrete, the following conclusions were drawn. (1) The shear capacity of high-strength lightweight concrete is less 15% than that of normal concrete under same condition. (2) As the results of Comparing this experimental datas with other various formulas. It is regarded that ACI 318-89 shear strength formula related tensile strength is proper to design formula of shear strength of high-strength lightweight reinforced concrete using lightweight concrete.

• Selected Papers of The Society of Naval Architects of Korea
• /
• 제1권1호
• /
• pp.37-44
• /
• 1993

Deck wetness phenomenon has long been considered as one of the factors that degrade the performance of a ship In waves. In rough weather, the frequent skipping of water may give rise to the capsizing of the ship. Therefore an appropriate above water bow shape design is an important asset to a ship of which successful performance in rough weather is a prerequisite such as a warship. In this paper an experimental technique for estimation of deck-wetness frequency is presented. The results of the model tests are compared with those of computations using Ochi's formula. Finally the applicability of Ochi's formula is discussed.

• Steel and Composite Structures
• /
• 제38권3호
• /
• pp.305-317
• /
• 2021

The mechanical behavior of the outer square inner circular concrete-filled dual steel tubular (SCCFT) stub columns under axial compression is investigated by means of experimental research, numerical analysis and theoretical investigation. Parameters such as diameter ratio, concrete strength and steel ratio were discussed to identify their influence on the mechanical properties of SCCFT short columns on the basis of the experimental investigation of seven SCCFT short columns. By establishing a finite element model, nonlinear analysis was performed to discuss the longitudinal and transverse stress of the dual steel tubes. The longitudinal stress characteristics of the core and sandwich concrete were also analyzed. Furthermore, the failure sequence was illustrated and the reasonable cross-section composition of SCCFT stub column was proposed. A formula to predict the axial load capacity of SCCFT stub column was advanced and verified by the results from experiment and the finite element.

• 한국정밀공학회지
• /
• 제10권2호
• /
• pp.154-160
• /
• 1993

A mothod to decide the optimal frequency for the fracture velocity measurement by ultrasonic fractography is presented. A theoretical formula to decide the optimal frequency for ultrasonic fractography testing is made and it is compared with experimental value. According to the formula the optimal frequency is shown to be depending on the attenuation coefficient and size(width) of the specimen. In the case of PMA specimen with ligament 43mm the theoretical value for the optimal frequency is about 260 KHz and it is good agreement with experimental value.

• 대한기계학회논문집A
• /
• 제34권6호
• /
• pp.751-756
• /
• 2010

비선형 초음파는 선형 초음파와 비교하였을 때 재료의 물성 변화에 민감하게 반응한다. 이 연구의 목표는 비선형 요소를 포함하여 열처리 조건과 초음파 비선형성의 상관관계를 알아내는 것이다. 본 연구에서 기존의 방법과는 다른 수정된 초음파속도계산 식이 새롭게 제안되었다. 이것은 열처리된 재질에서 초음파 속도변화가 재료의 비선형성 때문에 발생하는 것을 찾아내었다. 실험을 통하여 수정된 초음파 속도와 1차 조화 및 2차 조화파의 진폭 비율이 서로 동일한 경향을 보이는 것을 알아냈다. 그리고 수정된 초음파속도식을 통해 계산된 상대적인 비선형계수는 기존의 방법을 이용하였을 때보다 더 민감함을 알아냈다.