• 한국염색가공학회지
• /
• 제9권6호
• /
• pp.51-57
• /
• 1997

The lightness, chroma and hue tolerances with respect to the standard colour position in the CIELAB space have been studied in detail using the various existing data sets and the set form this study. The lightness tolerance showed a clear dependency upon the metric lightness for medium to light colour, but in the case of dark colours there was a discrepancy between the data sets. Both the chroma and hue tolerances showed dependency upon both the chroma and hue-angle and not the single dependency upon the metric chroma, as assumed in the CIE94 formula. New weighting functions were derived from the above experimental evidence, and finally a new formula, LCD(Leeds Colour Difference) was proposed. The LCD formula is nearly as simple and flexible as CIE94 but smoothes the individual weighting functions, especially for lightness tolerances for light colours and chromaticity discrimination near the blue region.

• Earthquakes and Structures
• /
• 제3권3_4호
• /
• pp.271-295
• /
• 2012

This paper presents the solution scheme of using the continuous formulation of 1-D linear member for the dynamic analysis of structures consisting of axially loaded members. The context describes specific applications of such scheme to the verification of experimental data obtained from field test of bridges carried out by a microwave interferometer system and velocimeters. Attention is focused on analysis outlines that may be applicable to in-situ assessment for cable-stayed bridges. The derivation of the dynamic stiffness matrix of a prismatic member with distributed properties is briefly reviewed. A back calculation formula using frequencies of two arbitrary modes of vibration is next proposed to compute the tension force in cables. Derivation of the proposed formula is based on the formulation of an axially loaded flexural member. The applications of the formulation and the proposed formula are illustrated with a series of realistic examples.

• Clinical and Experimental Pediatrics
• /
• 제56권5호
• /
• pp.202-204
• /
• 2013

• 대한치과교정학회지
• /
• 제30권4호
• /
• pp.467-473
• /
• 2000

각형 호선이 edgewise 브라켓에 삽입되면 first, second order는 bending에 의해, third order는 torsion(비틀림)에 의해 3차원적인 force system이 발생한다. Bending에 관하여는 분석적 그리고 실험적인 많은 연구가 보고 되어 있는 반면 비틀림에 관해서는 상대적으로 많은 연구가 이루어 지지 않았다. 본 연구의 목적은 각형 와이어의 재료와 단면의 형태가 와이어의 비틀림 모멘트에 어떻게 영향을 주는지를 이론적, 실험적으로 밝혀서 임상적으로 적절한 모멘트를 가할 때 호선의 재료와 굵기를 합리적으로 선택할 수 있도록 하는데 있다. 실험재료로는 third order조절을 위해 가장 많이 사용하는 호선을 사용하였다. 크기별로 0.016x0.022, 0.017x0.025, 0.019x0.025인치 그리고 재료로는 stainless steel (Ormco), TMA(Ormco), NiTi(Ormco), 그리고 braided stainless steel(DentaFlex, Dentauum) 네 가지를 사용하여 총 12개의 조합을 사용하였다. Torsion formula를 이용하여 비틀림 강성 (torque/twist rate)을 계산하였고 torque gauge를 이용하여 비틀림 강성, 항복 비틀림 모멘트 (yield torsional moment), 그리고 최대 비틀림 모멘트 (ultimate torsional moment)를 측정하였다. Torsion formula에 의하면 비틀림 강성 (T/$\theta$)은 재료적인 특성(G)과 호선의 단면의 특성(J)에 비례하고 호선의 길이(L)에 반비례한다. 대부분의 실험치는 이론적인 값과 비슷하게 나타났다.

• Journal of Power Electronics
• /
• 제18권3호
• /
• pp.746-756
• /
• 2018

Harmonic resonance exists in grid-connected inverter systems. In order to determine the network components that contribute to harmonic resonance and the composition of the resonant circuit, sensitivity theory is applied to the resonance characteristic analysis. Based on the modal analysis, the theory of sensitivity is applied to derive a formula for determining the sensitivities of each network component parameter under a resonance circumstance that reflects the participation of the network component. The solving formula is derived for both parallel harmonic resonance and series harmonic resonance. This formula is adopted to a 4-node grid-connected test system. The analysis results reveal that for a certain frequency, the participation of parallel resonance and series resonance are not the same. Finally, experimental results demonstrate that the solving formula for sensitivity is feasible for grid-connected systems.

• 한국축산식품학회지
• /
• 제18권4호
• /
• pp.285-291
• /
• 1998

Adsorption isotherms of water vapour for infant formula milk powders manufactured by P. M. and N company in Korea were measured at temperatures between 20, 30 and 40$^{\circ}C$ using COST-90 modified method. Results showed that the isotherms were sigmoidal in shape. The adsorption isotherms of milk powder were depending on the temperature and products. The BET-model were applied and analyzed to compare the experimental value. It was found that the BET-model is fitted with measuring data. Sample P showed the lowest monolayer value and sample N showed the highest. Isosteric heat obtained upon application of BET-model was calculated in this field of temperature using the Clausius-Clapeyron equation. It is suggested that the usage of the BET-model to estimate the heat of water sorption in infant formula milk powder should be in agreement with the results from COST-90 project.

• 산업기술연구
• /
• 제29권A호
• /
• pp.67-75
• /
• 2009

In this study, the investigation of hydraulic characteristics and the pier data for the rivers in Youngseo area of Gangwon Province was carried out and the evaluation and comparison between the values from existing formulas and the values from the model tests was conducted, along with the statistical sensitivity analysis of the elements influencing the scour. As a result, the deviation between the values calculated from the existing formulas and the model tests appeared to be 1.09%~63.98% as the piers were getting larger, which indicated that the existing formulas were not appropriate to estimate the scour in the rivers in Gangwon area. And the formula which estimates the scour with the size of the pier only, among the existing ones, was far behind in estimating the sensitivity because of insufficient incorporation of the hydraulic characteristics, though it is convenient to estimate the value. The sensitivity analysis of the value from the model tests and the depth of the scour proved the significant impact on scour by the size of the pier and water depth, indicating 64% and 36%, respectively. In this study, the formula developed through the regression analysis performed based on the values from the model tests, which appeared to be appropriate for the rivers in Gangwon Province, was proposed.

• Steel and Composite Structures
• /
• 제20권3호
• /
• pp.571-597
• /
• 2016

A new unified design formula for calculating the composite compressive strength of the axially loaded circular concrete filled double steel tubular (CFDST) short and slender columns is presented in this paper. The formula is obtained from the analytic solution by using the limit equilibrium theory, the cylinder theory and the "Unified theory" under axial compression. Furthermore, the stability factor of CFDST slender columns is derived on the basis of the Perry-Robertson formula. This paper also reports the results of experiments and finite element analysis carried out on concrete filled double steel tubular columns, where the tested specimens include short and slender columns with different steel ratio and yield strength of inner tube; a new constitutive model for the concrete confined by both the outer and inner steel tube is proposed and incorporated in the finite element model developed. The comparisons among the finite element results, experimental results, and theoretical predictions show a good agreement in predicting the behavior and strength of the concrete filled steel tubular (CFST) columns with or without inner steel tubes. An important characteristic of the new formulas is that they provide a unified formulation for both the plain CFST and CFDST columns relating to the compressive strength or the stability bearing capacity and a set of design parameters.

• 대한토목학회논문집
• /
• 제32권5A호
• /
• pp.289-297
• /
• 2012

본 연구는 부착식 PSC 텐던의 응력파 속도를 계측하여 텐던에 도입된 긴장응력을 추정 할 수 있는 실험식을 제안한다. 실용적 실험식의 도출을 위하여 도입 긴장력이 다른 다수의 PSC시험체가 제작되었으며, 다양한 조건에서 종진동 실험이 반복 수행되었다. 도입 응력과 응력파 속도 사이의 관계에 영향을 미칠 수 있는 온도, 길이 및 텐던의 개수 등이 영향인자로 고려되었으며, 상사의 법칙을 적용하여 무차원 실험식이 도출 되었다. 제안 기법의 현장 적용성 검증은 실제 발전소 격납건물에 설치된 수직텐던에 대하여 수행되었다. 제안식을 이용하여 추정된 긴장응력은 텐던의 설계응력과 유사하다.

• 콘크리트학회지
• /
• 제6권1호
• /
• pp.111-119
• /
• 1994

대형 콘크리트 패널구조 시스템의 수직접합부 저항요소는 접합부 충전 그라우트의 부착과 전단키에 의한 맞물림작용, 철근을 장부작용으로서, 이들 요인의 상관관계에 의해 그 내력이 결정된다. 따라서 수직접합부에 관한 연구는 대부분이 이들 요인에 관한 연구로 국한된다고 할 수 있다. 수직접합부의 전단강도에 관한 연구는 국외의 많은 연구자들에 의해 실시되었으며 그 결과 여러 실험식이 제시되어 있는 상황이다. 국내에서도 수직접합부에 관한 일련의 실험연구가 진행되어 설계식이 제시되었으나, 이들 설계식은 국부적인 실험결과만을 대상으로 제시되었기 때문에 보다 많은 실험결과를 근거로한 설계식이 요망된다. 본 연구에서는 국내에서 실험된 총 94개의 수직접합부 실험결과를 분석하고 수정된 Mohr-Coulomb의 항복선이론을 적용하여 적합한 설계식을 제시하고자 하였다. 제안된 설계식은 전단키의 효과와 횡보강근의 효과를 고려한 식으로서 모르터 또는 콘크리트를 그라우트로 사용하며 횡보강근으로 루프철근을 사용한 수직접합부에 적용된다. 실험결과의 희구분석과 항복선 이론을 이용한 수식의 전개로부터 제안된 설계식의 정확성과 경제성을 평가 한 결과, 본 제안식이 실험결과를 안전측으로 평가할 뿐만아니라 기존식에 비하여 경제적인 설계가 가증한 것으로 나타났다.