• Journal of Magnetics
• /
• 제16권1호
• /
• pp.58-63
• /
• 2011

This paper presents design procedures of a transverse flux linear motor (TFLM). The minimum and maximum flux linkage was determined by the simplified equivalent magnetic circuit and estimated average magnetic flux density at the air gap region by considering the shape of applied magnetomotive force (MMF). With this information, the number of turns of each phase winding was calculated based on the amplitude of applied voltage and speed of a mover. The rated current, coil diameter, and winding area were obtained with the aid of an empirical formula for determining the required MMF. The usefulness of the proposed design method for TFLM is verified by the three-dimensional equivalent magnetic circuit network (EMCN) method and the experimental results of prototyped machine.

• 한방안이비인후피부과학회지
• /
• 제12권2호
• /
• pp.148-160
• /
• 1999

In order to strengthen objectivity and availability of oriental herb medicine, the standard formula for herbs has been attempted to set up by documentary testing original herbs which were recorded in authorized document. The object herb medicines are CARYOPHYLLI FLOS. After this study, additional experimental verification is required as a matter of fact. As comparison materials, this thesis will be utilized. Specially the internal and external morphological standard in this study is expected to supply the search for several physiochemical reaction, biological reaction, determination of indicator material and identification of gene with basic sources in the future.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권1호
• /
• pp.327-346
• /
• 2019

The goal of hyperspectral pansharpening is to combine a hyperspectral image (HSI) with a panchromatic image (PANI) derived from the same scene to obtain a single fused image. In this paper, a new hyperspectral pansharpening approach using adaptive weighted regression and guided filter is proposed. First, the intensity information (INT) of the HSI is obtained by the adaptive weighted regression algorithm. Especially, the optimization formula is solved to obtain the closed solution to reduce the calculation amount. Then, the proposed method proposes a new way to obtain the sufficient spatial information from the PANI and INT by guided filtering. Finally, the fused HSI is obtained by adding the extracted spatial information to the interpolated HSI. Experimental results demonstrate that the proposed approach achieves better property in preserving the spectral information as well as enhancing the spatial detail compared with other excellent approaches in visual interpretation and objective fusion metrics.

• International journal of advanced smart convergence
• /
• 제7권4호
• /
• pp.57-65
• /
• 2018

Artificial neural network is inspired by the biological neural network. For simplicity, in computer science, it is represented as a set of layers. Many research has been made in evaluating the number of neurons in the hidden layer but still, none was accurate. Several methods are used until now which do not provide the exact formula for calculating the number of thehidden layer as well as the number of neurons in each hidden layer. In this paper model selection approach was presented. Proposed model is based on geographical analysis of decision boundary. Proposed model selection method is useful when we know the distribution of the training data set. To evaluate the performance of the proposed method we compare it to the traditional architecture on IRIS classification problem. According to the experimental result on Iris data proposed method is turned out to be a powerful one.

• Computers and Concrete
• /
• 제23권4호
• /
• pp.267-272
• /
• 2019

In order to study the effect of moisture on the compressive strength of low-strength hollow concrete blocks, an experimental study was carried out on 96 samples of locally manufactured hollow concrete blocks collected from three different locations. Uniaxial compression tests were conducted on dry specimens and three types of saturated specimens with moisture contents of 30%, 50% and 80% respectively. The range of moisture content adopted covered the range within which the concrete block samples are saturated in the dry and monsoon seasons. The compressive strength of low-strength hollow concrete blocks decreases with increase in moisture content and the relationship between compressive strength of hollow concrete blocks and their moisture content can be considered to be linear. However, the strength degradation of 30% moist concrete blocks with respect to dry blocks is relatively low and can be considered to be comparable to dry concrete blocks. A formula indicating the relationship between the moisture content and compressive strength of low-strength hollow concrete blocks is also proposed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권5호
• /
• pp.2414-2433
• /
• 2019

The aim of this paper is to design a 3D laser radar prototype based on laser triangulation. The mathematical model of distance sensitivity is deduced; a pixel-distance conversion formula is discussed and used to complete 3D scanning. The center position extraction algorithm of the spot is proposed, and the error of the linear laser, camera distortion and installation are corrected by using the proposed weighted average algorithm. Finally, the three-dimensional analytic computational algorithm is given to transform the measured distance into point cloud data. The experimental results show that this 3D laser radar can accomplish the 3D object scanning and the environment 3D reconstruction task. In addition, the experiment result proves that the product of the camera focal length and the baseline length is the key factor to influence measurement accuracy.

• 한국버섯학회지
• /
• 제17권2호
• /
• pp.47-51
• /
• 2019

Our research on juvenile Oncorhynchus masou masou in oyster mushroom supplemented diet was studied to investigate the effect of feeding. Mixing of feed ingredients for dried oyster mushrooms, 3.5, 7.0, 10.5, 14.0 (%) was added to the amount of oyster mushroom dietary beta-glucan content of the more abundant. After the weight of feed given to salmon survey oyster mushrooms diet for 3.5 to 7.0% was similar to the formula feed and the weight of the fish ate oyster mushroom feed over 10.5% were reduced. The oyster mushroom of the experimental diets containing 3.5 to 7.0 percent hepatosomatic index and feed coefficient figure was similar to those of the formulated diets. Therefore we have juvenile cherry salmon fed diets containing 3.5 to 7.0% was considered good to eat and additional research on the immune response will be carried out was necessary.

• 공학기술논문지
• /
• 제11권4호
• /
• pp.279-285
• /
• 2018

A shear connection between the steel beam and concrete slab determines the stability of composite beams. An extensive numerical study to evaluate the resistance of the shear connection in a solid slab at high temperature was conducted. Three-dimensional thermo-mechanical finite element models were developed using a dynamic explicit method and concrete damaged plasticity model. Temperature-dependent plasticity parameters of the concrete model were proposed, and the accuracy of the developed model was obtained against experimental data. This investigation has revealed that a stud shearing failure occurs regardless of temperatures, and its shearing location changes in accordance with a rise in temperature. A new strength reduction formula has been presented to estimate the resistance of the shear connection at high temperatures.

• 산업기술연구
• /
• 제41권1호
• /
• pp.7-13
• /
• 2021

Fiber-reinforced polymer reinforcement or polyurea reinforcement techniques are applied to strengthen unreinforced masonry walls (UMWs). The out-of-plane reinforcing effect of sprayed glass fiber-reinforced polyurea (GFRPU), which is a composite elastomer made of polyurea and milled glass fibers on UMW, is experimentally verified. The out-of-plane strengths and ductile behaviors based on various coating shapes are compared in this study. An empirical formula to describe the degree of reinforcement on the out-of-plane strength of the UMW is derived based on the experimental results. It is reported that the peak load-carrying capacity, ductility, and energy absorption capacity gradually improve with an increase in the strengthening degree or area. Compared with the existing masonry wall reinforcement method, the GFRPU technique is a construction method that can help improve the safety performance along with ease of construction and economic efficiency.

• 한국전자통신학회논문지
• /
• 제17권1호
• /
• pp.41-48
• /
• 2022

본 논문은 통합 베이즈 티코노프 정규화 방법을 총변이 정규화에 대한 해법으로 제시한다. 통합된 방법은 총변이 항을 가중된 티코노프 정규화 항으로 변형하여 정규화 모수를 구하는 공식을 제시한다. 정규화 모수를 구하고 이를 바탕으로 새로운 가중인수를 구하는 것을 복원된 영상이 수렴하기까지 반복한다. 실험결과는 영상 복원 문제에 대하여 제안하는 방법의 효능을 보여준다.