• 한국환경보건학회지
• /
• 제15권2호
• /
• pp.33-40
• /
• 1989

Dichromate reflux method for COD analysis is one of the useful and precise way to solve the organic content of the wastewater. But the standard procedure for COD is not entirely satisfactory for sample containing appreciable amounts of inhibiting substance, especially chloride ion. Under the conditions of the established test, a big disadvantage of the method is that dichromate oxidizes chloride quantitatively to chlorine. When it is necessary to use silver sulfate as a catalyst in the COD procedure, chloride must be removed before the addition of the catalyst. Silver sulfate and mecuric sulfate forms a precipitate of AgCl and HgCl$_{2}$ separately which is not completely oxidized during the test and, therefore, cannot be corrected for. So, we evaluate and compensate the amount of chloride oxidation in the absence of chemicals during the experimental procedure. Calculation of COD is made using the following reviced formula: real COD = tested COD - 0.2277Cl.

• Journal of Welding and Joining
• /
• 제25권2호
• /
• pp.70-75
• /
• 2007

Simplified mathematical formulas are presented to predict deformations during the plate forming process when the heating parameters are given. To obtain the formulas, firstly, the thermal analysis for steel plate is performed, and the thermo-mechanical analysis is followed with actual heating conditions. The analyses have been carried out by the commercial software MARC, which is programmed based on the FEM. Secondary, the results of the mechanical analysis are synthesized with their variables for a statistical approach, which results in simplified formulas. The results of the analysis are well compared with those of experimental measurements.

• 대한전자공학회논문지
• /
• 제10권6호
• /
• pp.5-10
• /
• 1973

스네이크라인 안테나 중심도체의 형상이 절단한 도형으로 되어 있을 때는 그의 복사특성을 해석함에 있어 그와 좀 다른 형태로 생각해도 크게 영향을 받지 않는다. 따라서 중심도체의 형상을 치사특성에 관한 기본원리를 적용할 수 있는 형태로 가정하여 그 특성을 해석할 수 있다. 이와 같은 방법으로 그의 감쇠상수가 중심도체의 기하학적수치로 표시된다. 실험결과가 이론적결과의 타당성을 뒷받침하고 있다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권2호
• /
• pp.351-356
• /
• 2001

In this paper, a general one-loop control system was assumed as a model system which has a time-delay element connected with a first order-lag element in series. After the corresponding parameter set causing stability limit condition for the model system was obtained by mathematical procedures, their loci on the parameter space was taken according of frequency change,. The parameter set loci of stability limit showed a specific pattern, and particularly the curves on the Kp-Ti parameter space were able to generalized in the form of an exponential formula. These properties were also compared with the results taken from experimental procedures by Nyquist response method and Ziegler & Nichols method on the time domain, and both results were confirmed to be nearly same.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회논문집(II)
• /
• pp.475-480
• /
• 1998

The composite framed structures, consisting of RC columns and steel beams more popular in korea because of their efficiency and quality. However the force transfer mechanisms between the column and beam may by very complicated since the materials of columns and beams are different. This study develops "the column penetration joint" which the web of steel beam doesn't penetrate and which could improve the strength, deformation, and energy dissipation capacities compared to existing composite joints. It is the concrete-filled square tube joint with the exterior diaphragms and the cruciform stiffening plates. This study evaluated the strength of RC column penetration to steel beam connection by analyzing the results of partial experiments, and reviewed the applicability the strength formula through the comparison of tested results of joint experiment.

• 대한기계학회논문집
• /
• 제3권3호
• /
• pp.98-103
• /
• 1979

The fatigue limit of an ion-nitrided steel was investigated experimentally and analytically. It is found that fatigue limit can singificantly be increased by ion-nitriding, and that the case depth is the most important parameter which determines the fatigue limit. The data indicate that fatigue limit increases with the case depth as well as the surface hardness of the nitrided steel. The fracrographs of the fracture surfaces taken by a scanning electron microscope show that the fisch-eye is located at the subsurface of failed specimens. Assuming that crack propagates from the subsurface inclusions, an analytical model is proposed to predict the fatigue limit. Taking into account the stress distrbution of a nitrided specimen, fatigue limit is predicted as a function of the case depth. The proposed semiemprical formula agrees satisfactorily with the experimental data obtained from rotating beam fatigue testing.

• 한국생산제조학회지
• /
• 제9권2호
• /
• pp.80-86
• /
• 2000

Although polishing process take 30-50% of whole process of manufacturing die and mold it has not been fully automat-ed yet. Considering current trend of manufacturing it is necessary to study on polishing automation. To accomplish automation reliable database must be developed. For developing it polishing mechanism should be defined and a general empirical formula that can be applied widely should be created. In this paper it is found that polishing process must be separated into 2 process such as removing cusp and getting fine surface process and the polishing parameter which is com-posed of major machining parameters and normalization of data can be applied efficiently in making reliable database.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1984-1987
• /
• 2005

This study evaluate the statical stability of the container crane with respect to the direction of wind load which is varied between $0^{\circ}$ and $180^{\circ}$ and its average velocity is 40m/s. Using wind experimental data and a formula of wind pressure, we figured out the wind load needed to perform a finite element analysis. And we can obtain the variation of reaction forces at each supporting point according to the direction of wind load.

• Journal of Welding and Joining
• /
• 제21권1호
• /
• pp.54-59
• /
• 2003

In the present work, a formula for plate deformation produced by line heating, in terms of process parameters such as heat input and plate dimensions, is developed analytically using an eigenstrain concept. The residual deformation that was due to thermal process was depends on the magnitude and region of plastic strains at heating zone. The magnitude of plastic strains was determined by disk model and its region was calculated using the Rosenthal"s solution. The vertical displacement of the plate was analyzed by using an infinite laminated plate theory to consider a cuboidal inclusion with an eigenstrain. Comparison of the calculated results and experimental data shows the accuracy and validity of proposed method.thod.

• 전기학회논문지
• /
• 제59권1호
• /
• pp.88-95
• /
• 2010

In this paper, the variation of phase current and input current ripple of interleaved boost converter at DCM for fuel cell applications are theoretically analyzed. Also, based on the detailed analysis, numerical formula of input current ripple expressed in rising and falling slope magnitude, D, and $D_A$ is proposed. In order to verify proposed formulas, simulation and experimental results are compared with theoretical data and validity of proposed theory is established.