• The Journal of Korean Physical Therapy
• /
• v.26 no.6
• /
• pp.418-424
• /
• 2014

Purpose: This study was performed to investigate the effect of joint mobilization on pain relief and cartilage repair in an induced osteoarthritis rat model by analyzing the expression of heat shock protein 70 in articular cartilage. Methods: MIA was injected into SD rats to induce osteoarthritis. These rats were divided into 4 groups: control group (n=30), no further treatment after the MIA injection ; experimental group I(n=30), performed swimming exercise after the MIA injection experimental group II (n=30), underwent joint mobilization after the MIA injection and experimental group III (n=30), performed swimming exercise and underwent joint mobilization after the MIA injection. For the histologic and pathophysiologic evaluation, safranin-O staining and for the immunohistochemical evaluation, the expression of HSP 70 in articular cartilage was analyzed 1, 7, 14, and 21 days after the MIA injection. Results: The inflammatory response and loss of tissue declined in experimental groups I and II over time, whereas the greatest decreases were noted in experimental group III. In the articular cartilage, low expression of HSP 70 was observed in every group on day 1, whereas HSP 70 expression was elevated on days 7 and 14 in experimental groups II and III. After 21 days, experimental group II displayed the strongest positive reaction, whereas HSP 70 was higher in experimental group III at this time point compared to that after 14 days. Conclusion: Our results showed that swimming exercise and joint mobilization had positive effects on pain relief and histologic and functional recovery in an induced osteoarthritis rat model.

• The Journal of Korean Society for School & Community Health Education
• /
• v.6
• /
• pp.35-48
• /
• 2005

The age of the very first smoking is a significant indicator of life-long health status. Smoking prevention intervention was actively conducted based in middle and high schools with the support of the Korean Act for Health Promotion since 1998. These governmental supports became large and various smoking prevention programs were developed and conducted in diverse standards and perspectives. This study made a comprehensive descriptive literature review on smoking prevention educational programs for youth in Korea to identify the intervention quality and effectiveness of them for future smoking prevention program development. A total of 28 peer-reviewed journal articles published between May, 1995 and May 2005 (for the last 10 years) were finally included in this review process. The study participants should be adolescences in middle or high schools in Korea and the intervention types of the review studies should be smoking prevention or cessation educational programs. The outcomes of the reviewed studies were reanalyzed by the participants' characteristics, theory basement, evaluation design, intervention period, evaluation outcomes, and program effectiveness Most smoking intervention programs were not specified by sex and smoking status. Largely most intervention programs focused on male students although female students' smoking percent is increasing including both smokers and nonsmokers. Based on the school grades, the large percents of smoking intervention were conducted to the first grade of middle school and the first grade of high school. Almost 70% of the reviewed studies did not apply any health behavior change theories and the Transtheoretical model and social cognitive theory were utilized in 7 studies among the last reviewed 30%. The theory-based intervention studies had greater effectiveness than the non-theory based studies. More than 90% had quasi-experimental evaluation design and the effectiveness of the non-experimental designed study seemed over estimated than the quasi-experimental or experimental designed studies. More than 60% of the reviewed studies made their education for less than j days, over a short period and the evaluation factors were knowledge and attitude in general which can be obtained in short intervention period. Therefore, smoking intervention programs for youth in Korea need to be modified in terms of research design such as the intervention period, intervention-evaluation design, theory-based approach, and population-focused intervention specification.

• Journal of Distribution Science
• /
• v.17 no.1
• /
• pp.95-103
• /
• 2019

Purpose - Recently, many theoretical researches suggested that arts-based marketing strategies provide many benefits for marketers to differentiate their brand or product from others. However, there has been little research focusing on consumers' response types from artwork (artifact-emotion appraisal; A-emotion vs. represented world-emotion appraisal; R-emotion). In order to deepen our understanding of arts-based marketing strategies, we addressed a research question related to how artwork-provoked consumers' emotional response can impact the perceived evaluation of art infused products. Research design, data, and methodology - To answer the research question, we conducted a pretest and one experimental study. The experimental study was 2(art-provoked response type: A-emotion vs. R-emotion) by 2(emotional valence: positive vs. negative) by 2(produce type: hedonic vs. utilitarian) mixed design. The art-provoked response type and emotional valence were between-subject design and product type was within subject design. For the experimental study, 108 undergraduate students and graduate students were randomly assigned to one of 4 conditions (A-emotion-positive, A-emotion-negative, R-emotion-positive, R-emotion-negative). Participants reported their evaluation of art-infused product and other items for a manipulation check. Results - The major results from the experimental study are as follow. First, participant's art-provoked response type influenced evaluation of art infused products differently. More specifically, the effect of emotional valence of artwork on product evaluation was not significant in A-emotion. However, in R-emotion, relative to the product with artwork provoked negative emotional valence, the product with artwork provoked positive emotional valence elicited significantly higher product evaluation. Second, product type also affected the art infusion effect significantly. Particularly, the differential effect of participant's art-provoked response type on product evaluation revealed when it is for a utilitarian product, but not for a hedonic product. Conclusions - Theoretically, the findings of this study expand academic research on art infusion. And the findings also can be extrapolated to generate lots of implication for marketers. In sum, when they plan art marketing strategies to build the favorable relationship with their customers, they need to consider customers' response type of an infused art and product type.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.10a
• /
• pp.239-244
• /
• 2000

The necessity of the seismic performance evaluation of existing building structures is raised through the Taiwan earthquake in 1999. In this study, the methods of seismic performance evaluation of existing building structures in U.S.A. and Japan were reviewed, applied them to the three-story office building structures in Seoul. It is found out that it is possible to establish the seismic performance evaluation index of RC structure which meet Korean seismic code. Also it is concluded that if sufficient experimental and analytical data could be obtained, a reliable index for the evaluation of seismic performance of existing structures should be established in Korea.

• Proceedings of the ESK Conference
• /
• 1997.04a
• /
• pp.10-16
• /
• 1997

The ride comfort is one of the most important indices which decide the quality of automotive seats. A subjective evaluation is the general method for comfort evaluation of automotive seats. But the subjective evaluation assess the individual sensibility using questionnaire. Therefore, a need to develop methodologies to obtain objective measurements of the fatigue evaluation is evident. In an effort to monitor muscle activity during driving electromyography (EMG) was employed. In an experimental setting the subjective evaluation was conducted using questionnaire under the static conditions (8 subjects) and the fatigue was induced in muscles using EMG under the dynamic conditions (2 drivers). The resultant EMG signals were then sampled for three different muscles. In test involving 2 subjects of similar size and build, utilizing four different automotive seats, test results support the use of EMG to quantify muscular fatigue as a viable means of objective evaluation for the different automotive seats.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.277-280
• /
• 2009

This paper deals with the performance evaluation of Barlat's and BBC yield criteria by the directional variation prediction of the yield stresses and the R-values. for the evaluation of yield criteria, three kinds of Aluminum alloys and two kinds of steels were selected and their material properties are from Stoughton and Yoon's work. The experimental data required for the parameter evaluation included the uniaxial yield stresses and R-values (width-to-thickness strain ratio in uniaxial tension) measured in rolling direction, diaganol direction and the transverse direction, the equibiaxial yield stress and the R-value of equibiaxial tension. The optimization method, the Downhill Simplex method, was selected for the coefficient identification of Barlat91, Barlat97 and Barlat2000 yield criteria. Yield surface shapes, yield stress and R-value directionalities of Barlat's and BBC yield criteria were investigated and compared with the experimental data. Barlat2000 and BBC yield criteria were extremely qualified for the shape of the yield surface and the directionality of the yield stresses and the R-values.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.6
• /
• pp.485-494
• /
• 2013

This paper deals with experimental evaluation methods for high speed judder on the brake-caliper system. Firstly, two types of brake caliper systems due to the wheel vibration was evaluated. Secondly, the high-speed judder of the brake was also investigated using the subjective rating evaluation in the high-speed road test. These experimental evaluations were carried out by changing the materials of brake pad and the specifications of the brake-corner module. Based upon the test results, a new specification of the brake pad, $15{\times}5$ vertical chamfer, was proposed. The new brake pad showed 3 points, 60 %, improvement in the subjective-rating evaluation comparing with conventional one. Besides, we need to decide properly with judder characteristic of pad material and have to carefully take into consideration other design parameters; caliper, disc, and the braking performance, durability, squeal noise.

• Safety and Health at Work
• /
• v.3 no.1
• /
• pp.43-49
• /
• 2012

In recent years, various international organizations have raised awareness regarding psychosocial risks and work-related stress. European stakeholders have also taken action on these issues by producing important documents, such as position papers and government regulations, which are reviewed in this article. In particular, 4 European models that have been developed for the assessment and management of work-related stress are considered here. Although important advances have been made in the understanding of work-related stress, there are still gaps in the translation of this knowledge into effective practice at the enterprise level. There are additional problems regarding the methodology in the evaluation of work-related stress. The European models described in this article are based on holistic, global and participatory approaches, where the active role of and involvement of workers are always emphasized. The limitations of these models are in the lack of clarity on preventive intervention and, for two of them, the lack of instrument standardization for risk evaluation. The comparison among the European models to approach work-related stress, although with limitations and socio-cultural differences, offers the possibility for the development of a social dialogue that is important in defining the correct and practical methodology for work stress evaluation and prevention.

• Advanced Composite Materials
• /
• v.18 no.4
• /
• pp.327-338
• /
• 2009

In this paper, through an evaluation process conducted on several designs of mini-LIPCA (Lightweight Piezo-Composite curved Actuator), an optimal design of a mini-LIPCA has been proposed. Comparing with the LIPCA-C2, the design of the mini-LIPCA comes with reduced overall size and a thinner active layer. Since a variation in the number and lay-up of fiber composite layers may strongly affect the performance of the device, one is able to configure several designs of mini-LIPCA. The evaluation process is then followed in order to determine a configuration which characterizes the possibly optimal performance. That is, a design of a mini-LIPCA is said to be optimal if it is capable of producing a maximum out-of-plane displacement. The size of the LIPCA to be investigated was selected to be $10\;mm\;{\times}\;20\;mm$ in which the thickness of PZT plate is about 0.1 mm. The thickness of glass/epoxy and carbon/epoxy are about 0.09 mm and 0.1 mm, respectively. The evaluation process has been conducted thoroughly, i.e., analytical estimation, numerical approximation and the experimental measurement are all involved. Firstly, the design equation was used to calculate essential parameters of proposed lay-up configurations. Secondly, ANSYS, a commercial FEA package, was utilized to estimate displacement outputs of the actuators upon being excited. Finally, experimental measurements were able to verify the predicted results.

• Composites Research
• /
• v.17 no.1
• /
• pp.1-9
• /
• 2004

A new non-destructive evaluation method using tapping sound is proposed. This method, named Tapping Sound Analysis, is using the difference between tapping sound data of healthy structure and defective structure as the criteria of determination of internal defect of composite structure. For the characterization of tapping sound, a feature extraction method based on wavelet packet transform is proposed. And a feature index is defined for the decision of existence of internal defects. To prove the possibility of proposed method as a non-destructive evaluation method, experimental study is performed. The tapping sound data of healthy structure and defective structure are measured and compared based on the proposed decision method. The experimental results showed that the feature index is a good indicator for the determination of internal defects.