Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study for High Speed Judder Evaluation on Brake System

제동 시스템에서 고속 저더 개선 평가에 관한 연구

  • Received : 2011.04.12
  • Accepted : 2013.05.15
  • Published : 2013.06.20
Download PDF
⟨ Previous Next ⟩

Abstract

This paper deals with experimental evaluation methods for high speed judder on the brake-caliper system. Firstly, two types of brake caliper systems due to the wheel vibration was evaluated. Secondly, the high-speed judder of the brake was also investigated using the subjective rating evaluation in the high-speed road test. These experimental evaluations were carried out by changing the materials of brake pad and the specifications of the brake-corner module. Based upon the test results, a new specification of the brake pad, $15{\times}5$ vertical chamfer, was proposed. The new brake pad showed 3 points, 60 %, improvement in the subjective-rating evaluation comparing with conventional one. Besides, we need to decide properly with judder characteristic of pad material and have to carefully take into consideration other design parameters; caliper, disc, and the braking performance, durability, squeal noise.

Keywords

References

  1. Cho, H. J., 2006, The Origin and Effect of Hot Spot Phenomena on Judder Vibration in Automotive Disk Brake, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 16, No. 8, pp. 886-892. https://doi.org/10.5050/KSNVN.2006.16.8.886
  2. Choi, Y. S. and Shin, B. S., 2006, Brake Judder due to Disc Run-out, Proceedings of the KSNVE Annual Autumn Conference, 06A0809.
  3. Kang, T. W., 1999, Test and Diagnostics Methods for Judder Vibration of the Brake System, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 9 No. 3, pp. 613-620.
  4. Cho, H. J., 2005, Analysis of the Effect Mode Shape on Judder Phenomenon in Automotive Disk Brake, Proceedings of the KSAE, 05-F0166, pp. 1056-1061.
  5. Lee, J. S., 2002, An Experimental Study on Brake Judder of Braking on Vehicle, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 12, No. 5, pp. 338-345. https://doi.org/10.5050/KSNVN.2002.12.5.338
  6. Hwang, I. J. and Park, G. J., 2005, System Mode and Sensitivity Analysis for Brake Judder Reduction, Transactions of KSAE, Vol. 13, No. 6, pp. 142-153.
  7. Engel, H. G., Hassiotis, V. and Tieman, R., 1994, System Approach to Brake Judder, SAE945041.
  8. Meyer, R., 2005, Brake Judder - Analysis of the Excitation and Transmission Mechanism within the Coupled System Brake, Chassis and Steering System, SAE 05013916.
  9. Lee, K. J. and Dinwidie, R. B., 1998, Conditions of Frictionanl Contact in Disc Brakes and their Effects on Brake Judder, SAE980598.
  10. Inoue, H., 1986, Analysis of Brake Judder caused by Thermal Deformation of Brake Disc Rotors, SAE865131.
  11. Kim, B. S., Ryu, G. S., Hwang, I. J. and Kim, H. Y., 2002, Vehicle Comfort Analysis under Braking Conditions, Proceedings of the KSAE, Vol. II, KSAE, pp. 464-469.
  12. Kim, M. G., Jeong, H. I. and Yoo, W. S., 1996, Sensitivity Analysis of Chassis System to Improve Shimmy and Brake Judder Vibration to on Steering Wheel, SAE 960734.
  13. Cho, S. S., 2006, Vehicle Judder Sensitivity (K-Factor) and Development Target by Steering Wheel Vibration Response, Mando R&D-A126-00.