• Journal of Mechanical Science and Technology
• /
• v.18 no.1
• /
• pp.153-166
• /
• 2004

This paper presents a comparative study of a fully coupled, upwind, compressible Navier-Stokes code with three two-equation models and the Baldwin-Lomax algebraic model in predicting transonic/supersonic flow. The k-$\varepsilon$ turbulence model of Abe performed well in predicting the pressure distributions and the velocity profiles near the flow separation over the axisymmetric bump, even though there were some discrepancies with the experimental data in the shear-stress distributions. Additionally, it is noted that this model has y$\^$*/ in damping functions instead of y$\^$＋/. The turbulence model of Abe and Wilcox showed better agreements in skin friction coefficient distribution with the experimental data than the other models did for a supersonic compression ramp problem. Wilcox's model seems to be more reliable than the other models in terms of numerical stability. The two-equation models revealed that the redevelopment of the boundary layer was somewhat slow downstream of the reattachment portion.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.2
• /
• pp.649-658
• /
• 1996

Small-amplitude harmonic oscillations of multi-cylinders are considered both experimentally and theoretically. For the theoretical model, the flow regime is separated into inner and outer regions. In the inner region, the flow is governed by the generalized Stokes boundary layer equation. In the outer region, the full Navier-Stokes equation for the steady streaming flow is solved numerically by using ADI scheme and FVM coupled with the boundary integral method. Flow visualization experiments are conducted by using the Laser Sheet Image Technique. The case of two circular cylinders and square cylinders with variable distances are chosen as a typical example. Although experimental results are based on the flow in the finite domain, both experimental and numerical results agree well qualitatively. As the separation of cylinders is increased, a numerical result shows the asymptotic convergence to a single cylinder case.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.05a
• /
• pp.199-202
• /
• 2008

The purpose of this study is to obtain the fundamental fire resistance performance of engineered cementitious composites(ECC) under fire temperature in order to use the fire protection material in high-strength concrete structures. The present study conducted the experiment to simulate fire temperature by employing of ECC and investigated experimentally the explosion and cracks in heated surface of these ECC. In the experimental studies, 3 HSC specimens are being exposed to fire, in order to examine the influence of various parameters(such as depth of layer=20, 30, 40mm; construction method=lining type) on the fire performance of HSC structures. Employed temperature curve were ISO 834 criterion(3hr), which are severe in various criterion of fire temperature in building structures. The numerical regressive analysis and proposed equation to calculate ambient temperature distribution is carried out and verified against the experimental data. By the use of proposed equation, the HSC members subjected to fire loads were designed and discussed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.836-841
• /
• 2002

The nonlinear vibration of moving viscoelastic belts excited by the eccentricity of pulleys is investigated through experimental and analytical methods. Laboratory measurements demonstrate the nonlinearities in the responses of the belt, particularly in the resonance region and with the variation of tension. The measurements of the belt motion were made using a noncontact laser sensor Jump and hysteresis phenomenon are observed experimentally and are studied with a model which considers the nonlinear relation of belt stretch. An ordinary differential equation is derived as a working form of the belt equation of motion. Numerical results show good agreements with the experimental observations, which demonstrates the nonlinearity of viscoelastic moving belts

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.2
• /
• pp.117-122
• /
• 2002

This study assesses the wear process of particle impingement erosion which is a major source of erosion among fluid power components. First, Bitter's theory was modified to simplify engineering calculations. Second, actual experiments were conducted to validate the modified equation. And the effect of concentration and size distribution of impinging particles was tested. Little deviation from the prediction of the modified equation was observed. To develop complete analytical approach to the erosion mechanism, further experimental data are required to establish a correlation with other engineering parameters.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.222-232
• /
• 2009

In this study, the real site test conditions were considered and applied to suggest the improved test method for geosynthetics chemical resistance. For this, index and performance tests were done to specify and regulate the more approached test method. Accelerated model by Arrhenius equation was applied to interpretate the experimental data. Through analysis and comparison the overall experimental results, we could suggest the possibility and setup the advanced chemical resistance test method for geosynthetics.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.3 no.1
• /
• pp.11-25
• /
• 1991

The steady, incompressible developing 3-dimensional turblent flow in a square sectioned curved duct has been investigated by using partially-parabolic equation and Finite Analytic Method. The calculation of turbulent flow field is performed using 2-equation K-$\epsilon$ turbulence model, modified wall function, simpler algorithm and numerically generated body fitted coordinates. Iso-mean velocity contours at the various sections are compared with the existing experimental data and elliptic solutions by other authors. In the region of $0^{\circ}<{\theta}<71^{\circ}$, present results agree with the experimental data much better than the elliptic solution for the similar number of grid points. Furthermore, for the same tolerance, the present solution converges four times faster than the elliptic solution.

• Journal of the Korean institute of surface engineering
• /
• v.24 no.3
• /
• pp.125-136
• /
• 1991

a mathematical model is presented to describe the current distribution on a rotaing disk electrode under the galvanostatic pulse conlitions. A numerical technique by finite difference method to the transient convective diffusion equation, coordinate transformation and separation of variables to Laplace equation, and an iterative algorithm to solve the above equations simtltaneously with approximate boundary conditions were developed. An experimental investigated based on copper deposition in a copper sulfate-sulfuric acid system was performed and satisfactory agreement was obtained between expermental and theoretical current distribution. The current distribution of copper deposition is secondary current distribution within the experimental conditions. Dimensionless variables, N and J as well as Wagner number were used to determine the criteria for the uniformity of current distribution.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.16 no.1
• /
• pp.81-88
• /
• 1987

In this paper, the local effective thermal conductivities and calculated by using the actual temperature distribution in packed bed. The variations of these are investigated for radius and air stream direction, flow rate and particle diameter. The resulting local effective thermal conductivi-ties are classified in the inner zone of bed and vicinity zone of the wall surface. Also these are related to dimensionless axial direction position, radius direction position, and particle diameter and Reynolds number which uses particle diameter as the characteristic length. If these correla-tions are represented by function, the equation is showed in Eq. (3-4). This equation is well satisfied with experimental results within $\pm25\%.$

• Food Science and Preservation
• /
• v.4 no.2
• /
• pp.123-130
• /
• 1997

To develop the prediction program for quality change of Citrus unshiu during marketing, we examined the quality characteristics of Citrus unshiu stored at experimental refrigerator set to 4, 8, 12 and 16$^{\circ}C$ for 2 months. According to the storage temperature the changes of quality characteristics were different respectively, but it was most severe during 16$^{\circ}C$ storage. Activation energy and Q10 value were 6683.16 cal/mol K and 1.53 respectively. The determination coefficient of regression equation of pH, acidity and vitamin C by surface response analysis were over 0.85. Using these regression equation, we developed the prediction program for the change of pH, acidity and vitamin C contents. The calculated values and experimental values of pH, acidity and vitamin C contents for short-term storage of Citrus unshiu were coincided well.