• Journal of Mechanical Science and Technology
• /
• 제15권5호
• /
• pp.602-612
• /
• 2001

The equation of the particle collection efficiency proposed by Deutsch has been modified through the various experiments to correct the errors caused by the assumptions made for the equation. In order to get an modified Deutsch equation that can be applied to real conditions, a pilot scale electrostatic precipitator is used. The effects of operational variables on the particle collection efficiency are evaluated. Particle resistivity, gas temperature, moisture contents in gas, gas velocity and particle concentration are used as the operational variables. Two different types of coal fly-ash obtained from the fluidized bed combustor and the pulverized coal combustor are used as test particulate to evaluate the effect of the physiochemical and electrical characteristics of the particle on the particle collection efficiency. The experimental results are fitted with the modified Deutsch equation made by Matts-Ohnfeldt and the extended Deutsch equation made by E. C. Potter to evaluate the effect of the particle characteristics and the operation conditions on the particle collection efficiency of the electrostatic precipitator.

• 상하수도학회지
• /
• 제21권4호
• /
• pp.421-428
• /
• 2007

Many engineering problems on the pipeline flow use continuity, energy, friction loss head equation. To calculate friction loss head in a pipeline, Darcy-Weisbach and many average velocity equations can be used and Hazen-Williams equation is used frequently in the pipe network for the water supply systems. Darcy-Weisbach equation is a general one acquired from applying Bernoulli's equation in the pipeline flow and Hazen-Williams equation is a experimental one in case that pipe velocity is below 3m/sec and pipe diameter is over 50mm. In this study, comparing Darcy-Weisbach with Hazen-Williams equation, relation f and C that are expressed as roughness coefficients of those equations is explained. Next, head losses calculated from using those equations are compared and those are applied in realistic pipelines. Comparing f with C, the f is decreasing linearly according to increase of the Reynolds number Re and increasing in case the C is decreasing. additionally, the C is increasing up to a point and then is decreasing according to increase of the Re. Next, the C is increasing and Re's range for increase of the C lengthens in case of decreasing of the relative roughness ${\varepsilon}/d$. Comparing head losses acquired from the two equations, head loss appears large in case that the C is decreasing and the ${\varepsilon}/d$ is increasing. additionally, Head loss calculated by the Darcy-Weisbach equation varies larger than one by Hazen-Williams equation in regard of the Re. Next, change aspect of head loss acquired by the C is distinguished more clearly than the one by the ${\varepsilon}/d$.

• 물과 미래
• /
• 제28권4호
• /
• pp.215-222
• /
• 1995

비포화 흐름의 지배방정식인 Richards식을 수치해석하기 위해 필요한 물보유함수는 이력현상을 가지고 있으며 이러한 이력현상은 비포화 흐름특성에 중요한 영향을 미친다. 본 연구에서는 토양시료의 물보유함수 실측치를 이용하여 기존의 이력현상 모형들의 정확성을 검토하였다. 이를 위해 물보유함수 이력현상을 실측할 수 있는 실험장치를 개발하여 국내 토양시료를 대상으로한 주젖음과정과 주마름과정의 실측치를 구하였고, 이 자료로부터 물보유함수 추정식인 van Genuchten식의 매개변수를 추정하였다. 추정된 주젖음곡선을 이력현상 모형인 Model I-1(Mualem), Model II-1(Mualem) 과 Model III-2(박과 선우)에 적용하여 주마름곡선을 모의한 결과, Model I-1의 모의곡선은 주마름곡선의 실측치를 과대 모의하고 Model II-1은 과소 모의하지만 Model III-2는 실측치에 근접하게 모의하였다.

• 한국수자원학회논문집
• /
• 제42권2호
• /
• pp.105-115
• /
• 2009

본 연구에서는 Storm Water Management Model(SWMM)의 기존 유역폭식의 문제점을 도출하고, 새로운 유역폭식을 개발하여 그 적합성을 가상유역 및 실제유역에 적용하여 분석 제시하였다. 기존 유역폭식의 문제점을 도출하기 위해 유역폭의 이론적 거동특성을 규명하고, 이를 간략화된 가상유역에 적용하여 분석하였다. 본 연구에서 제시한 수정유역폭식은 소유역의 지표면 흐름뿐 아니라 관의 흐름을 고려한 것으로 가상유역에 적용한 결과 기존 유역폭식의 문제점을 개선할 수 있는 것으로 나타났다. 또한, 실제유역에서 개발된 수정유역폭식의 적합성을 검증하기 위해 96.3 ha에 해당하는 군자배수구역 시범지역으로 선정하여 강우사상에 따른 유출량 자료를 실측하였다. 실측된 강우-유출사상에 대해 수정유역폭식을 적용한 결과, 기존 유역폭식보다 보다 정확히 유출을 모의할 수 있는 것으로 나타났다.

• 한국수자원학회논문집
• /
• 제36권3호
• /
• pp.507-520
• /
• 2003

V형 여울은 하천 양안에 설치하여 여울의 가운데로 물의 흐름을 집중시켜 하도 중앙 직하류에 세굴로 인한 소(pool)를 형성하는 역할을 하는 인공 여울이다. V형 여울의 설치 목적은 평탄화된 하도에 소를 형성시켜 갈수시 어류의 서식처 노는 피난처를 제공하고, 홍수시에는 유속이 약한 구간을 발생시켜 어류의 피난처를 제공하는 것이다. 본 연구에서는 V형 여울의 수리 모형 실험을 실시하여 각 조건에 따른 세굴심을 측정하여 세굴 특성을 분석하였고, 나아가 수리량 조건 및 V형 여울 형태와 세굴 간의 정량적인 관계를 실험 결과로부터 도출하였다. 또한 V형 여울과 형태가 유사한 수제에서의 세굴심에 대한 기존의 연구 결과와 V형 여울의 경우를 비교하였다. 그 결과 Breusers와 Raudkivi(1991)가 제안한 수제에서의 세굴심 예측식은 V형 여울에서의 세굴심을 과소평가하지만 V형 여울께서의 세굴 특성을 일부 반영하는 것으로 나타났다. V형 여울의 세굴에 영향을 주는 인자들의 무차원화를 통해 V형 여울에서의 세굴심 예측식을 제안하였고 제안된 예측식은 V형 여울의 적용에 있어서 세굴심을 추정하는데 사용될 수 있고 판단된다. V형 여울의 세굴에 지배적인 영향을 주는 인자는 여울 중앙에서의 프루드 수이고, 그밖에 여울과 흐름의 각도와 여울 개구부의 폭도 부분적으로 영향을 준다.

• 한국수자원학회논문집
• /
• 제30권6호
• /
• pp.743-751
• /
• 1997

본 연구에서는 수직 또는 경사 에 의한 세굴에 대한 과거 연구결과의 종합적인 분석 및 재검토를 통하여 현재까지의 실험에 대한 문제점 파악 및 앞으로의 연구방향을 모색하며 과거 여러 연구자들의 실험적 연구중 약 500개의 실험자료를 이용하여 범용성있는 실험적 예측공식을 제시하였다. 예측세굴깊이는 하류수심 Ht와 평형하상으로부터의 세굴깊이 Hs의 합으로 표현할 수 있었으며 세굴지배인지는 하상입자의 크기, 단위폭당 유량, 그리고 상하류수면 차로 단순화시킬 수 있었으며 ${\gamma}$=0.941란 높은 상관관계를 보이는 경험적 세굴예측공식을 유도하였다. 유도하였다.

• Journal of Mechanical Science and Technology
• /
• 제18권4호
• /
• pp.689-698
• /
• 2004

Uncertainties generated from the individual measured variables have an influence on the uncertainty of the experimental result through a data reduction equation. In this study, a performance test of a single stage axial type turbine is conducted, and total-to-total efficiencies are measured at the various off-design points In the low pressure and cold state. Based on an experimental apparatus, a data reduction equation for turbine efficiency is formulated and six measured variables are selected. Codes are written to calculate the efficiency, the uncertainty of the efficiency, and the sensitivity of the efficiency uncertainty by each of the measured quantities. The influence of each measured variable on the experimental result is figured out. Results show that the largest uncertainty magnification factor (UMF) value is obtained by the inlet total pressure among the six measured variables, and its value is always greater than one. The UMF values of the inlet total temperature, the torque, and the RPM are always one. The uncertainty percentage contribution (UPC) of the RPM shows th, lowest influence on the uncertainty of the turbine efficiency, but the UPC of the torque has the largest influence to the result among the measured variables. These results are applied to find the correct direction for meeting an uncertainty requirement of the experimental result in the planning or development Phase of experiment, and also to offer ideas for preparing a measurement system in the planning phase.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권11호
• /
• pp.533-539
• /
• 2005

In the previous work, we performed the analysis of a tubular type moving-magnet linear oscillatory actuator (LOA) with cylindrical Halbach array by using 2-d analytical formulas and confirmed validity of analytical results by comparison of those with both finite element (FE) computation and experimental results. This paper deals with the dynamic characteristic analysis of the moving-magnet LOA with cylindrical Halbach array. Control parameters such as the thrust constant, the back-emf constant, resistance and inductance are obtained from both analytical and experimental results. And then, the dynamic simulation algorithm is established by the state and output equation obtained from voltage and motion equation. Finally, for various values of frequency, the dynamic simulation and experimental results for the characteristics of the voltage, current and displacement of moving-magnet LOA are presented. The simulation results are validated extensively by experiments. The experimental and simulation results for the variation of stroke according to control voltage are also presented for various values of frequency.

• 한국농공학회지
• /
• 제41권5호
• /
• pp.86-92
• /
• 1999

Effluent concentration estimation equations for wetland system were developed throught statistical analysis of treatment wetland experimental data. Existin g empirical equations were reviewed for thier accuracy with experimental data, and compared with the estimatin equations. About 70 experimental data sets were used for multiple regression, and variables include influent concentration, hydraulic loading rate, average daily air temperature , and plant coverage. The estimatin equations developed for BOD5 , SS ,T-P, and T-N predicted effluent concentrations moderately well, and coefficient fo determination ($R^2$) for them was 0.74 , 0.60, 0.59 and 0.58 respectively. The equations obtained from same data but excluding plant coverage showed relatively lower $R^2$ than the former case, and it was 0.66, 0.52, 0.41 and 0.57 respectively. The EPA, WPCF , and Kadlec and Knight equations worked poorly and $R^2$ for them was significantly lower than the estimation equation developed in the study. The reason might be that the existing equations were oversimplified that they did ot include important parameters such as air temperature and plant coverage. Therefore, developing reasonable estimation equations from experiment under realistic condition is highly recommended rather than using exiting estimation equations.

• Smart Structures and Systems
• /
• 제24권3호
• /
• pp.361-377
• /
• 2019

The stiffness of shape memory alloy (SMA) spring while in actuation is represented by an empirical model that is derived from the logistic differential equation. This model correlates the stiffness to the alloy temperature and the functionality of SMA spring as active variable stiffness actuator (VSA) is analyzed based on factors that are the input conditions (activation current, duty cycle and excitation frequency) and operating conditions (pre-stress and mechanical connection). The model parameters are estimated by adopting the nonlinear least square method, henceforth, the model is validated experimentally. The average correlation factor of 0.95 between the model response and experimental results validates the proposed model. In furtherance, the justification is augmented from the comparison with existing stiffness models (logistic curve model and polynomial model). The important distinction from several observations regarding the comparison of the model prediction with the experimental states that it is more superior, flexible and adaptable than the existing. The nature of stiffness variation in the SMA spring is assessed also from the Dynamic Mechanical Thermal Analysis (DMTA), which as well proves the proposal. This model advances the ability to use SMA integrated mechanism for enhanced variable stiffness actuation. The investigation proves that the stiffness of SMA spring may be altered under controlled conditions.