• 대한기계학회논문집
• /
• 제19권2호
• /
• pp.580-590
• /
• 1995

To design and develop a turbocharged engine, ti needs that many study must be preceded about the characteristics of engine performance. Especially, a basic data about deciding target power is urgently needed for which is practically useful for engine design. The power output of turbo-charged engine is dominated by engine speed, displacement, compression ratio, air fuel ratio and charge pressure ratio. Therefore, the independent effect of these factors on power output was clarified from experiment, and the experimental equation to predict the power was founded from there results. The predicted power output from the experimental equation was well coincided with power measured through experiment.

• Journal of Advanced Marine Engineering and Technology
• /
• 제16권4호
• /
• pp.50-59
• /
• 1992

The paper presents a digital speed control approach of induction motor systems by using a digital servo control method and a well-known second order differential equation as model. The basic concept of using the modeling equation stated in the above is induced from the control theory stand point such that we can describe usually the motor system connected by inverter, generator and load etc, just as a mechanical system to be controlled. The concept does not demand us the complicated vector-based modeling equation adopted in the traditional methods for the speed control of induction motor. Futhermore, the proposed speed control system can be treated as a single input and single output system. The effectiveness of the servo control system obtained by the above-mentioned design concept is illustrated by the experimental results in the presence of both step reference changes and load variations. It is observed from the experimental results that the steady state-error of the experimental set up becomes zero after some regulation time and the induction motor system is robust in spite of reference signal changes and load variations.

• 한국소음진동공학회논문집
• /
• 제21권6호
• /
• pp.491-498
• /
• 2011

The structural vibration due to earthquake or outside impact causes serious problem for building safety. A dynamic model of a friction damper which can be constructed and installed easily is needed to reduce the vibration of the building. In this paper, the experimental equation of a circular friction damper is derived and designed for reduction of a earthquake vibration of a building. The developed experimental equation is defined to simply design the capacity on design of the circular friction damper based on the results of the performance test. Finally this experimental equation can be used for the design of a circular friction damper.

• 수산해양기술연구
• /
• 제28권1호
• /
• pp.27-38
• /
• 1992

The paper presents a digital speed control approach of induction motor systems by using a digital redesign method and adopting a well known 2nd order model as the system model equation. The basic concept using the modeling equation is induced from the control theory stand point such that we can describe usually the motor system connected by inverter, generator and load etc. just as a mechanical system to be controlled. The concept does not demand us the complicated vector-based modeling equation adopted in the traditional methods for the speed control of induction motor. The effectiveness of the servo control system composed by the above mentioned design concept is illustrated by the experimental results in the presence of step reference change and generator load variation. It is observed from the experimental results that the steady state error of the experimental set up becomes zero after some regulation time and the induction motor system is robust in spite of reference signal change and load variation of generator.

• Bulletin of the Korean Chemical Society
• /
• 제34권12호
• /
• pp.3709-3714
• /
• 2013

Based on the Debye-H$\ddot{u}$ckel equation, a semi-empirical equation for activity coefficients was derived through empirical and theoretical trial and error efforts. The obtained equation included two parameters: the proportional factor and the effective radius of an ionic sphere. These parameters were used in the empirical and regression parameter fitting of the calculated values to the experimental results. The activity coefficients calculated from the equation agreed with the data. Transforming to a semi-empirical form, the equation was expressed with one parameter, the ion radius. The ion radius, ${\alpha}$, was divided into three parameters, ${\alpha}_{cation}$, ${\alpha}_{anion}$ and ${\delta}_{cation}$, representing parameters for the cation, anion and combination, respectively. The advantage of this equation is the ability to propose a semi-empirical equation that can easily determine the activity coefficient with just one parameter, so the equation is expected to be used more widely in actual industry applications.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.890-895
• /
• 2001

Pressure resonance frequency that is caused in the combustion chamber can be interpreted to acoustic analysis. Until now the pressure resonance has been assumed and calculated to a disc type combustion chamber that neglected the combustion chamber height because the knock occurs near the TDC(top dead center). In this research FEM(fine element method) has been used to calculate the pressure resonance frequency inside the experimental engine combustion. The reduce error of the resonance frequency obtained by FEM has decreased about 50% compared to the calculation of Draper's equation. Due to the asymmetry in the shape of the combustion chamber that was neglected in Draper's equation we could find out that a new resonance frequency could be generated. To make the experimental results equal we could know that the speed of sound that satisfies Draper's equation was selected 13% higher than all the pent-roof type combustion considered.

• 대한기계학회논문집B
• /
• 제22권1호
• /
• pp.1-11
• /
• 1998

For the analysis of phonon heat transfer within short time and spatial scales, conventional macroscopic heat conduction equations with jump boundary conditions are tried and the results are compared to those of equation of phonon radiative transport(EPRT), which is one of microscopic transport equation. In transient state the macroscopic temperatures show far different behavior from EPRT. In steady state the hyperbolic temperatures with temperature jump at the wall from time relaxation model agrees well with EPRT temperatures. Since EPRT is also an approximate form of microscopic transport equation and there are no experimental results to verify the proposed model in this study, we can not conclude whether the approaching method from this study is valid or not. To the authors' knowledge, there are no experimental results available which can be used to test the validity of these models. Such an experiment, while difficult to conduct, would be invaluable.

• 대한설비공학회지:설비저널
• /
• 제13권3호
• /
• pp.168-182
• /
• 1984

For the purpose of drying high moisture rough rice effectively, from the view point of pre-drying, some basic experiments of fluidized bed drying of rough rice were carried out. The minimum fluidization velocities $(U_{mf})$ for both rough rice and glass bead were analyzed to find out fluidizing characteristics. The main results obtained were as follows ; 1) Minimum fluidization velocity of rough rice and glass bead were 2.01m/s and 4.07m/s, respectively, when using the distributor with $16\%$ opening ratio. 2) $U_{mf}$ calculated by Shirai's empirical equation and that calculated by Wen's modified equation were inconsistent with experimental data, while $U_{mf}$ calculated by Ergun's equation was consistent with the experimental data. 3) The following equations, on the basis of Leva's equation, were obtained. $$C_{mf}=1.19\times10^{-4}(Re_p)^{-0.0318)\;(rough rice)$$ $$C_{mf}=1.02imes10^{-4}(Re_p)^{-0.0047)\;(glass bead)$$

• 한국해양공학회지
• /
• 제15권4호
• /
• pp.14-19
• /
• 2001

In this paper, the wave and current forces acting on cylinders are investigated by theoretical and experimental methods. The models used are one-cylinder, four-cylinder and semi-submersible types. The theoretical investigations are carried out by the Morison equation and three dimensional source distribution method to calculate exciting forces in waves with and without currents. The experimental investigations are carried out in the wave tank which can generate currents in both directions. In these tests, the models have been exposed to the regular waves with and without currents. It is shown that the exciting forces acting on the one-cylinder or four-cylinders can be approximately estimated by the Morison equation and also by the diffraction theory. However, the Morison equation seems to be not appropriate to estimate the exciting forces on the present type of semi-submersible.

• 대한전기학회논문지
• /
• 제36권3호
• /
• pp.153-162
• /
• 1987

The purpose of this paper is to analysis and develop theoretically the characteristics of tubular linear induction motor, which is a special industrial motor that generates directly thrust force from electrical power. The Poisson equation about vector potential which is created by the application of Maxwell electromagnetic equation with the speed considered, results in modified Bessel equation by the assumption that is applied to each region of the experimental motor. Vector potential, magnetic flux density, secondary current, and thrust force according to its region respectively were found out by substituting boundary condition for this equation and rearranging. Besides, a attendant materials, that is, thermal characteristic, which is one of the characteristics under the operation of experimental motor each part's magnetic flux distribution characteristics within active zone, the required time for reciprocating motion, and variation of power factor vs. a slip were found.