• Steel and Composite Structures
• /
• v.34 no.4
• /
• pp.487-497
• /
• 2020

During the last few decades, fluid viscous dampers have been significantly improved in terms of performance and reliability. Viscous dampers dissipate the input energy into heat and the increased temperature may damage internal seals of the damper. As a result, thermal compensation is crucial for almost all fluid viscous dampers. In this study, while referring to the main working principles of the recently developed bypass viscous damper in Iran, a comprehensive case study is conducted on a RC building having diagonal braces equipped with such viscous dampers. Experimental results of a small-scale bypass viscous damper is presented and it is shown that the currently available simplified Maxwell models can simulate behavior of the bypass viscous damper with good accuracy. Using a case study, contribution of bypass viscous dampers to seismic behavior of structural and non-structural elements are investigated. A designed procedure is adopted to increase damping ratio of the building from 3% to 15%. In this way, reductions of 25% and 13% in the required concrete and steel rebar materials have been achieved. From nonlinear time history analyses, it is observed that bypass viscous dampers can greatly improve seismic behavior of structural elements and non-structural elements.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.2
• /
• pp.7-14
• /
• 2002

This paper proposes a camera motion estimation technique using special relations of motion vectors of geometrically symmetrical triple points of two consecutive views of single camera. The proposed technique uses camera-induced motion vectors and their relations other than feature points and epioplar constraints. As contrast to the time consuming iterations or numerical methods in the calculation of E-matrix or F-matrix induced by epipolar constraints, the proposed technique calculates camera motion parameters such as panning, tilting, rolling, and zooming at once by applying the proposed linear equation sets to the motion vectors. And by devised background discriminants, it effectively reflects only the background region into the calculation of motion parameters, thus making the calculation more accurate and fast enough to accommodate MPEG-4 requirements. Experimental results on various types of sequences show the validity and the broad applicability of the proposed technique.

• PNF and Movement
• /
• v.18 no.2
• /
• pp.173-182
• /
• 2020

Purpose: The purpose of the study was to investigate the effects of visual feedback exercise (VFE), sandal exercise (SE), and thera-band exercise (TE) on people with functional ankle instability. Methods: The 45 study participants were divided into three groups of 15. In the VFE group, participants performed short-foot exercises using visual feedback; the SE group performed sandal exercises, and the TE group performed thera-band exercises. Over a period of 8 consecutive weeks, the experimental groups exercised for 15 minutes per session, four times per week. Balance was measured using the Biodex Balance System for dynamic balance ability (overall balance index [OBI], mediolateral balance index [MBI], and anterioposterior balance index [ABI]). Vibration threshold sense (VTS) was assessed using a vibratory sensory analyzer. Ankle muscular strength was measured using the Biodex 4 Pro. The main outcome measures were assessed at baseline and after 8 weeks of training. Results: Significant improvements in dynamic balance were noted in all three groups (p < 0.05). Significant improvements in VTS and muscular strength were also noted in the VFE and TE groups but not in the SE group (p < 0.05). Conclusion: Appropriate environmental and situational mediation may be of great clinical significance for patients suffering from chronic ankle instability. It is hoped that the findings will inform a program for prevention of ankle instability.

• Safety and Health at Work
• /
• v.3 no.2
• /
• pp.92-100
• /
• 2012

Objectives: The French National Occupational Diseases Surveillance and Prevention Network (RNV3P) is a French network of occupational disease specialists, which collects, in standardised coded reports, all cases where a physician of any specialty, referred a patient to a university occupational disease centre, to establish the relation between the disease observed and occupational exposures, independently of statutory considerations related to compensation. The objective is to compare the relevance of disproportionality measures, widely used in pharmacovigilance, for the detection of potentially new disease ${\times}$ exposure associations in RNV3P database (by analogy with the detection of potentially new health event ${\times}$ drug associations in the spontaneous reporting databases from pharmacovigilance). Methods: 2001-2009 data from RNV3P are used (81,132 observations leading to 11,627 disease ${\times}$ exposure associations). The structure of RNV3P database is compared with the ones of pharmacovigilance databases. Seven disproportionality metrics are tested and their results, notably in terms of ranking the disease ${\times}$ exposure associations, are compared. Results: RNV3P and pharmacovigilance databases showed similar structure. Frequentist methods (proportional reporting ratio [PRR], reporting odds ratio [ROR]) and a Bayesian one (known as BCPNN for "Bayesian Confidence Propagation Neural Network") show a rather similar behaviour on our data, conversely to other methods (as Poisson). Finally the PRR method was chosen, because more complex methods did not show a greater value with the RNV3P data. Accordingly, a procedure for detecting signals with PRR method, automatic triage for exclusion of associations already known, and then investigating these signals is suggested. Conclusion: This procedure may be seen as a first step of hypothesis generation before launching epidemiological and/or experimental studies.

• Journal of Digital Contents Society
• /
• v.19 no.7
• /
• pp.1397-1403
• /
• 2018

Today, modern people perceive skin care as part of their physical health care, and acne is a common skin disease problem that is found on the face. In this paper, an effective acne detection algorithm using CIE $L^*a^*b^*$ color space has been proposed. It is red when the pixel value of the component image $a^*$ is a positive number, so it is suitable for detecting acne in skin image. First, the skin image based on the RGB color space is subjected to light compensation through color balancing, and converted into a CIE $L^*a^*b^*$ color space. The extracted component image $a^*$ was normalized, and then the skin and acne area were estimated with the threshold values. Experimental results show that the proposed method detects acne more effectively than the conventional method based on brightness information, and the proposed method is robust against the reflected light source.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.9
• /
• pp.384-391
• /
• 2003

The wideband annular ring slot antenna with concentric radiating structure and low impedance feedline has been presented. This antenna has been analyzed in compensation for FR-4 substrate with relative permittivity 4.3 and thickness 1 mm. As the measured 10 dB impedance bandwidth of the proposed antenna is 127.2%(2.17∼9.76 GHz), its bandwidth is much broader than maximum 82% bandwidth of a conventional annular ring slot antenna. Experimental results from 2 to 10 GHz are shown to be in good agreement with the simulation. And this antenna has a high gain above 4 dBi from 2 GHz to 10 GHz as well as a 24% size reduction and 42% area reduction than a circular slot antenna.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.1
• /
• pp.149-156
• /
• 2011

The purpose of this paper is the brief introduction of touchless fingerprint recognition and the assessment of interoperability between touchless and legacy rolled fingerprints for the wide use of touchless fingerprint recognition system. In order to assess the interoperability, the contrast and resolution of the touchless images are optimized firstly. And we perform the matching by using conventional minutiae-based matcher. Experimental results are promising that our touchless fingerprints have enough matching performance with equal error rate 7.9%. We can expect that our paper will make a significant contribution to the wide use of touchless fingerprint recognition and the increment of interoperability in the system integration between touchless-based and touch-based fingerprint systems.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.1
• /
• pp.11-18
• /
• 2002

Compomer, like resin composite, undergoes shrinkage during setting. But, due to the structure of glass ionomers and their hydrophilic nature, water sorption and subsequent expansion may lead to compensation of the shrinkage. The purpose of this study was to, evaluate the change of mliroleakage after 30day-water-storage of compomer and composite resin. 40 sound third molars were used for the microleakage test. Z-100 resin was used for the control groups(Group I and III), Dyract AP for the experimental groups(Group II and IV). The storage time was 1 day in Group I, II and 30days in Group III, IV. The result from the this study can be summarized as follows; 1. No significant difference could be found in microleakage of occlusal margin between each group(p>0.05). 2. In microleakage of gingival margin, no significant difference could be found between group I and II, and between group I and III (p>0.05). 3. Group IV was showed less microleakage than group II and group III in gingival margin(p<0.05).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1686-1694
• /
• 2014

In this paper, a new scheme to recognize a finger shape in the depth image captured by Kinect is proposed. Rigid transformation of an input finger shape is pre-processed for its robustness against the shape angle of input fingers. After extracting contour map from hand region, observing the change of contour pixel location is performed to calculate rotational compensation angle. For the finger shape recognition, we first acquire three pixel points, the most left, right, and top located pixel points. In the proposed algorithm, we first acquire three pixel points, the most left, right, and top located pixel points for the finger shape recognition, also we use geometrical features of human fingers such as Euclidean distance, the angle of the finger and the pixel area of hand region between each pixel points to recognize the finger shape. Through experimental results, we show that the proposed algorithm performs better than old schemes.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.2
• /
• pp.213-219
• /
• 2013

Recently, with the rapid advancement in information and communication technology, indoor location-based services(LBSs) that require precise position tracking have been actively studied with outdoor-LBS using GPS. However, in case of a ship which consists of steel structure, it is difficult to measure a precise localization due to significant ranging error by the diffraction and refraction of radio waves. In order to reduce location measurement errors that occur in these indoor environments, this paper presents distance compensation algorithms that are suitable for a narrow passage such as ship corridors without any additional sensors by using UWB(Ultra-wide-band), which is robust to multi-path and has an error in the range of a few centimeters in free space. These improvement methods are that Pythagorean theory and adjacent node technique are used to solve the distance error due to the node deployment and distance variation analysis technique is applied to reduce the ranging errors which are significantly fluctuated in the corner section. The experimental results show that the number of nodes and the distance error are reduced to 66% and 57.41%, respectively, compared with conventional CSS(Chirp spread spectrum) method.