• Title/Summary/Keyword: Experimental compensation

Search Result 1,013, Processing Time 0.028 seconds

Statistical Error Compensation Techniques for Spectral Quantization

  • Choi, Seung-Ho;Kim, Hong-Kook
    • Speech Sciences
    • /
    • v.11 no.4
    • /
    • pp.17-28
    • /
    • 2004
  • In this paper, we propose a statistical approach to improve the performance of spectral quantization of speech coders. The proposed techniques compensate for the distortion in a decoded line spectrum pairs (LSP) vector based on a statistical mapping function between a decoded LSP vector and its corresponding original LSP vector. We first develop two codebook-based probabilistic matching (CBPM) methods based on linear mapping functions according to different assumption of distribution of LSP vectors. In addition, we propose an iterative procedure for the two CBPMs. We apply the proposed techniques to a predictive vector quantizer used for the IS-641 speech coder. The experimental results show that the proposed techniques reduce average spectral distortion by around 0.064dB.

  • PDF

A Study on the Dosage ate Control of the Pre-Chorine in Water Purification using Fuzzy Inference Technique (퍼지 론기법 정수공정의 전염소주입율 제어에 관한 연구)

  • 이상석;소명옥;이준탁
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.2 no.1
    • /
    • pp.89-95
    • /
    • 1996
  • This paper describes a fuzzy controlled pre-chlorination technique for purifying the pulluted raw water in water purification lants. For the purpose of obtaining the high quality water, the appropriate pre-chlorine dosage rate has to be continuously adjusted according to a change in quality of a intake raw water, weather, solar nergy mount, temperature and etc. Therefore, the method of expressing an expert's empirical knowledge cumulated from his past carrier by fuzzy reasoning and the fuzzy controller design technique is necessary.In this paper fuzzy membership functions and rules accordingto emprircal knowledge and experimental field data were obtained, And also fuzzy cintriller design using four feedforward components for the determination of pre-chlorine dosage rate and four feedback ones for the compensation of its dosage rate with residual chlorine and its change rate, was executed.

  • PDF

Polynomial Time Algorithm for Satellite Communications Scheduling Problem with Capacity Constrainted Transponder

  • Lee, Sang-Un
    • Journal of the Korea Society of Computer and Information
    • /
    • v.21 no.6
    • /
    • pp.47-53
    • /
    • 2016
  • This paper deals with the capacity constrained time slot assignment problem(CTSAP) that a satellite switches to traffic between $m{\times}n$ ground stations using on-board $k{\leq}_{min}\{m,n\}$ k-transponders switching modes in SS/TDMA time-division technology. There was no polynomial time algorithm to solve the optimal solution thus this problem classified by NP-hard. This paper suggests a heuristic algorithm with O(mn) time complexity to solve the optimal solution for this problem. Firstly, the proposed algorithm selects maximum packet lengths of $\({mn \atop c}\)$ combination and transmits the cut of minimum packet length in each switching mode(MSMC). In the case of last switching mode with inefficient transmission, we applies a compensation strategy to obtain the minimum number of switching modes and the minimum makespan. The proposed algorithm finds optimal solution in polynomial time for all of the experimental data.

New Voltage Programming LTPS-TFT Pixel Scaling Down VTH Variation for AMOLED Display

  • Nam, Woo-Jin;Lee, Jae-Hoon;Shin, Hee-Sun;Jeon, Jae-Hong;Han, Min-Koo
    • Journal of Information Display
    • /
    • v.7 no.3
    • /
    • pp.9-12
    • /
    • 2006
  • A new voltage-scaled compensation pixel which employs 3 p-type poly-Si TFTs and 2 capacitors without additional control line has been proposed and verified. The proposed pixel does not employ the $V_{TH}$ memorizing and cancellation, but scales down the inevitable $V_{TH}$ variation of poly-Si TFT. Also the troublesome narrow input range of $V_{DATA}$ is increased and the $V_{DD}$ supply voltage drop is suppressed. In our experimental results, the OLED current error is successfully compensated by easily controlling the proposed voltage scaling effects.

Improved 3-DOF Attitude Control of a Model Helicopter using Fuzzy-Tuning PID Controller (퍼지 동조 PID 제어기를 이용한 모형 헬리콥터의 개선된 3자유도 자세제어)

  • Park, Mun-Soo;Park, Duck-Gee;Jung, Won-Jae;Kim, Byung-Do;Hong, Suk-Kyo
    • Proceedings of the KIEE Conference
    • /
    • 2001.07d
    • /
    • pp.2470-2472
    • /
    • 2001
  • This paper describes the application of a fuzzy-tuning PID controller to a 3-DOF attitude control of a small model helicopter in hover for the compensation of coupling effects between each axis and system uncertainties due to the variation of engine RPM. A Low-level PID controller is designed by Ziegler-Nichols method and its gains are tuned by a high-level fuzzy system based on error states and its time derivatives. The experimental results show that the attitude control performance of fuzzy-tuning PID controller is improved comparing with that of a Ziegler-Nichols PID controller and fuzzy controller.

  • PDF

Performance Improvement of Grid-Connected Inverter Systems under Unbalanced and Distorted Grid Voltage by Using a PR Controller

  • Lee, Jong-Hyun;Jeong, Hae-Gwang;Lee, Kyo-Beum
    • Journal of Electrical Engineering and Technology
    • /
    • v.7 no.6
    • /
    • pp.918-925
    • /
    • 2012
  • This paper proposes a control method for grid-connected inverter systems under unbalanced and distorted grid voltage. The proposed method can reduce the power ripple caused by the unbalanced condition and compensate for the low-order harmonics of the output currents caused by the distortion of grid voltage. To reduce the power ripple, our method replaces the two conventional PI controllers with one PR controllers in the stationary frame. PR controllers can implement selective harmonic compensation without excessive computational requirements; the use of these controllers simplifies the method. Both the simulated and experimental results agree well with the theoretical analysis.

The Development and Experimental Evaluation of 100kVA Unified Power Quality Conditioner interconnected to the Li-Battery System (리튬 배터리를 연계한 100kVA UPQC 개발 및 성능시험)

  • Lee, Hak-Ju;Chae, Woo-Kyu;Park, Jung-Sung;Sohn, Jin-Man;Choi, Eun-Sik
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.26 no.10
    • /
    • pp.102-110
    • /
    • 2012
  • This paper propose the advanced topology of UPQC, its DC link is connected with Lithium battery, to compensate the momentary interruptions. The proposed system can be operated as UPS mode using the parallel inverter, which control the charge or discharge of battery, in case of the interruption. We dvelop 100kVA UPQC using the proposed topology to rise the power quality and the reliability of Microgrid. We verify its usefulness through voltage compensation test, UPS operation test and etc. using Microgrid test facility.

Novel Structure of 3-Phase Phase-Locked Loop with Stiffness against Disturbance (외란에 강인한 새로운 구조의 3상 Phase-Locked Loop)

  • Bae Byung-Yeol;Han Byung-Moon;Park Yong-Hee;Cho Yun-Ho
    • The Transactions of the Korean Institute of Electrical Engineers B
    • /
    • v.55 no.1
    • /
    • pp.39-46
    • /
    • 2006
  • PLL is a key item of power converter for power quality compensation and power flow control. This paper proposes a novel 3-phase PLL that is composed of ALC and PI controller. The operational principle was investigated through theoretical approach, and the performance was verified through computer simulations with MATLAB and experimental works with TMS320VC33 DSP board. The proposed 3-phase PLL shows accurate performance under the voltage disturbances such as sag, harmonics. phase-angle jump, and frequency change.

The Switching Characteristics of Series-Connected Power Transistors (전력용 트랜지스터의 직렬연결시 스윗칭 특성)

  • 서범석;이택기;현동석
    • The Transactions of the Korean Institute of Electrical Engineers
    • /
    • v.41 no.6
    • /
    • pp.600-606
    • /
    • 1992
  • The series connection of power switching semiconductor elements is essential when a high voltage converter is made, so researches are being conducted to further develop this technology. In the series connection of power switching semiconductor elements, the main problem is that simultaneous conduction at turn-on and simultaneous blocking at turn-off together with voltage balancing are unattainable because of the difference of their switching characteristics. In this paper a novel series connection algorithm is proposed, which can implement not only the synchronization of the points of turn-on and turn-off time but the dynamic voltage balancing in spite of the difference of each switching characteristics. The proposed method is that the compensated control signal is attained from the voltage feedback signal and applied to the series-connected power transistors independently. Computer simulation and experimental results verify its validity.

  • PDF

High-powerfactor Control of Boost-type Rectifier without input Current Sensing (입력전류의 검출이 없는 승압형 정류기의 고역률제어)

  • Bae, Chang-Han;Lee, Gyo-Beom;Song, Jung-Ho;Lee, Gwang-Un
    • The Transactions of the Korean Institute of Electrical Engineers B
    • /
    • v.48 no.9
    • /
    • pp.510-516
    • /
    • 1999
  • In this paper, a new high-powerfactor control method for boost-type rectifier is proposed, which removes the necessity of input current sensing. This method generates a sinewave duty template only from the line voltage waveform and rectifier output, and reduces reactive power remarkably utilizing three compensation coefficients which are determined through experiments. These compensations make the input current to be in phase with the input voltage all over the load range. A prototype boost-type rectifier is designed and experimental results are presented.

  • PDF