• 설비공학논문집
• /
• 제3권1호
• /
• pp.11-25
• /
• 1991

The steady, incompressible developing 3-dimensional turblent flow in a square sectioned curved duct has been investigated by using partially-parabolic equation and Finite Analytic Method. The calculation of turbulent flow field is performed using 2-equation K-$\epsilon$ turbulence model, modified wall function, simpler algorithm and numerically generated body fitted coordinates. Iso-mean velocity contours at the various sections are compared with the existing experimental data and elliptic solutions by other authors. In the region of $0^{\circ}<{\theta}<71^{\circ}$, present results agree with the experimental data much better than the elliptic solution for the similar number of grid points. Furthermore, for the same tolerance, the present solution converges four times faster than the elliptic solution.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.251-253
• /
• 2003

This paper discusses some practical problems of the determination of ship wave resistance from flow calculation and the model test. there are so many kind of CFD program as FLUENT, WAVIS, SHIPFLOW, COMET etc. for finding optimized hull. we should know how much percent we trust the program. so if we gather computed values of the wave resistance we'll able to get more accurated values of presumptive.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.876-885
• /
• 2015

High frequency alternating current (HFAC) has been widely used in a wide range of power distribution systems (PDS) due to its superior performance. A high frequency AC/DC converter plays the role of converting HFAC voltage to DC voltage. In this paper, a new LCL-T resonant AC/DC converter has been proposed, and an easier control method based on input voltage comparison is presented, without the complicated calculation of the zero-crossing point. Both a low distortion and near-to-unity power factor can be achieved by the proposed resonant converter and control strategy. The operational principle and steady-state analysis are given for the proposed resonant converter. A simulation model and experimental prototype are implemented with an operation frequency of 25kHz and a rated power of 20W. The simulation and experimental results verify the accuracy of the analysis and the excellent performance of the proposed topology.

• Journal of Advanced Marine Engineering and Technology
• /
• 제12권2호
• /
• pp.35-45
• /
• 1988

In this paper an experimental review of condition monitoring method using time domain vibration signals and statically measured wave forms of a multi-components damaged ball bearing is presented first time. Many investigators studied already about vibration characteristics of a single point damaged ball bearing but they did not make efforts to verify vibration phenomena of a multi-components damaged one. Even in case of a tripple components damaged (i.e, outer race, inner race and rolling element) one, the high frequency resonance technique (HERT) and the displacement time domain technique can be also used for its fault detection. According to experimental results undertaken a static displacement measuring method, the defect locations of components can be proposed confidently with simple calculation of the rotating angles of each component.

• Journal of Radiation Protection and Research
• /
• 제18권2호
• /
• pp.47-59
• /
• 1993

본 연구에서는 사용후핵 연료를 안전하게 수송할 수 있는 수송용기의 여러 가지 설계 항목중에 수송용기 내부에 장전한 핵연료에 의한 핵임계반응을 방지하기 위한 핵임계해석을 수행하였다. 핵임계 해석에 사용한 HANSEN-ROACH-KENO-Va 전산시스템에 대한 검증계산을 수행하였고 수송용기의 핵임계측면에서의 안전성을 확보하기 위해 가능한 보수적인 가정을 하여 어떠한 경우에도 수송용기에 장전된 핵연료가 임계상태에 도달하지 않도록 수송용기 내부의 구조 및 적절한 핵임계 방지제를 선택하였고 정상수송 및 가상사고 조건 등에 대한 해석을 수행하였다. 그 결과 KSC-7 수송용기 의 설계조건을 만족하고 핵임계측면에서의 안전성을 보장할 수 있는 재료 및 구조에 대한 결론을 해석적으로 도출하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.462-467
• /
• 1998

A rational method for prediction of long-term deflections of reinforced concrete beams under sustained loads was proposed. Strain and stress distributions of uncracked and fully cracked sections after creep and shrinkage were determined from the requirements of strain compatibility and force equilibrium of a section, and then long-term deflections were calculated from the section analysis results. In fully cracked section analysis, noncoincidence of the neutral axis of strain and the neutral axis of stress after creep and shrinkage was taken into account. The accuracy of the proposed method was verified by comparison with several experimental measurements of beam deflections. The proposed approximate procedure gave the better predictions than the existing approximate methods. At the same time, the proposed method also retained simplicity of the calculation, since maximum long-term deflection could be obtained without tedious integration of the curvatures.

• 한국정밀공학회지
• /
• 제21권10호
• /
• pp.137-146
• /
• 2004

This is the second of two companion papers concerned with the analysis and design of a pneumatic vibration isolation system. The properties of the system are clarified by observation of the transmissibility surface calculated by the models and algorithm developed in the first paper of this research. It Is shown that the nonlinear model proposed in this research is more closer to experimental results than the linear model that have been used in previous studies. The design optimization of the major design variables that affect the performance of the system is achieved by using the condition for attenuation, disturbance rejection and maximum damping in resonance peak. The design space search method is adopted for the optimization of the orifice area. The models, transmissibility calculation algorithms and design optimization techniques developed in this research are shown to be greatly helpful to the optimal design of the pneumatic vibration isolation system by experiment.

• 한국광학회지
• /
• 제12권6호
• /
• pp.489-495
• /
• 2001

난반사체를 이용한 다이오드 횡여기 Nd:YAG 레이저 헤드의 설계코드를 개발하여 레이저 결정 내 홉수된 빔의 균일성과 최대 레이저 출력을 갖는 설계요소의 조건에 관해 분석하고, 수치해석 방법으로 열렌즈 효과를 고려한 레이저 공진기의 레이저 출력을 계산하고 실험치와 비교 분석하였다. 1,080W의 여기광 출력에서 측정된 약 504 W의 레이저 출력은 열렌즈 효과를 고려하여 수치 해석적으로 계산된 레이저 출력과 레이저 공진기의 안정영역에서 거의 일치함을 확인하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권1호
• /
• pp.73-80
• /
• 2006

In order to compute the radiated sound from a vibrating structure, the Rayleigh's integral equation has to be derived from the Helmholtz equation using Green's function. Generally, the surface velocity in the Rayleigh's integral equation uses the root mean square(rms) velocity. The calculation value is too large, because it's not considered cancelation. On the other hand. using the complex velocity, the sound pressure is calculated too small, because it considers that sound is perfectly canceled out. Therefore, this thesis proposes a correction factor(CF) which considers vibration modes and the method by which to calculate the radiating sound pressure. The theoretical results are compared with the experimental values, and the proposed method can be verified with confluence.

• 전자공학회논문지A
• /
• 제32A권1호
• /
• pp.61-69
• /
• 1995

a numerical method to the problem of mutual admittance between two slots is considered by use of conservation of complex power. Calculation of mutual admittance is compared with other results. And mutual admittance obtained by the method is used in the analysis for the broadband rectangular microstrip antenna geometry using E0plane gap coupling. The theoretical results for both return loss and radiation pattern of the broadband antenna are compared with experimental results. Good agreement between calculated and measured values has been observed.