• Earthquakes and Structures
• /
• 제22권5호
• /
• pp.475-485
• /
• 2022

This paper presents a comparative experimental study on structural behavior of the interlocking masonry walls under in-plane cyclic loading. The main purpose of this study is to increase lateral load-bearing capacities of masonry walls by using interlocking units. The interlocking units were designed by considering failure modes of masonry walls and produced using lightweight foamed concrete. To this end, three masonry walls which are hollow, fully grouted, and reinforced were constructed with interlocking units. Also, a traditional masonry brick wall was built for comparison reasons. The walls were tested under in-plane cyclic loading. Then, structural parameters of the walls such as lateral load bearing and total energy dissipation capacities, ductility, stiffness degradation as well as failure modes obtained from the tests were compared with each other. The results have shown that the walls with the interlocking units have better structural performance than traditional masonry brick walls and they may be used in the construction of low-rise masonry structures in rural areas to improve in-plane structural performance.

• Communications for Statistical Applications and Methods
• /
• 제25권3호
• /
• pp.275-282
• /
• 2018

This paper discusses the use of projections for the sums of squares in the analyses of variance for two-way nested design data. The model for this data is assumed to only have random effects. Two different sizes of experimental units are required for a given experimental situation, since nesting is assumed to occur both in the treatment structure and in the design structure. So, variance components are coming from the sources of random effects of treatment factors and error terms in different sizes of experimental units. The model for this type of experimental situation is a random effects model with more than one error terms and therefore estimation of variance components are concerned. A projection method is used for the calculation of sums of squares due to random components. Squared distances of projections instead of using the usual reductions in sums of squares that show how to use projections to estimate the variance components associated with the random components in the assumed model. Expectations of quadratic forms are obtained by the Hartley's synthesis as a means of calculation.

• 성인간호학회지
• /
• 제26권5호
• /
• pp.489-499
• /
• 2014

Purpose: The purpose of this study was to examine the effects of delirium care training program on the nurses' knowledge of delirium, self-confidence and performance levels in caring patients with delirium. Methods: The study was used a quasi-experimental design. The participants were 131 nurses in general nursing units in B and J hospitals. Sixty four nurses in B hospital were allocated into the experimental group and 67 nurses from J hospital into the control group. The delirium care training program was composed of lecture and clinical practice. Clinical practice of delirium care was applied everyday for 4 consecutive weeks starting from the admission day of the older adults(${\geq}70$ years old), using 'short CAM' and 'nursing checklist for delirium prevention'. Results: The knowledge of delirium, self-confidence in caring patients, and performance levels of nursing care were significantly increased in the experimental group compared to the control group. Conclusion: The findings of this study provided the evidence for the potential utility of the delirium care training program and underscored the needs of broader application of the training program of delirium care for nurses in general nursing units.

• Nuclear Engineering and Technology
• /
• 제28권3호
• /
• pp.290-298
• /
• 1996

Direct Containment Heating, DCH, is supposed to occur during a core melt-down accident if the primary system pressure is still high at the time of vessel breach in a Nuclear Power Plant (NPP). In this case, DCH is considered to be one of very important severe phenomena during postulated severe accident scenario because of the fast heat transfer rate to atmosphere and the sharp pressure increase in a containment. To reduce the effect of this DCH phenomena, the capture volume wes designed at Ulchin NPP units 3 and 4. But, the effect of this has not been studied extensively. This work consists of experimental and numerical analyses of the effects of capture volume in the cavity on DCH phenomena. The experimental model is a 1/30 scaled-down model of Ulchin NPP units 3 and 4. We used three types of capture volumes to investigate the effect of size. Numerical analysis using CONTAIN 1.2 is performed with the correlation for the dispersed fraction of molten corium from the cavity into the containment derived from the experimental data to examine the effect of capture volume on DCH phenomena in full scale of Ulchin NPP units 3 and 4.

• 대한치과보철학회지
• /
• 제44권2호
• /
• pp.174-184
• /
• 2006

Purpose: Current trend in implant dentistry is changing from external connection to internal connection. To evaluate the splinting of external and internal connection implant on screw loosening, 2-units prosthesis was fabricated with BioPlant $System^(R)$ of external connection type and Lifecore STAGE-1 Single Stage Implant $System^(R)$ of internal connection type. Material and Method: Experimental group is classified into three groups. 1) $G_1-EE$: 2-units prosthesis was fabricated with two Bioplant $System^(R)$ of external connection type. 2) $G_1-EI$: 2-units prosthesis was fabricated with one BioPlant $System^(R)$ of external connection type and one Lifecore STAGE-1 Single Stage Implant $System^(R)$ of internal connection type. 3) $G_1-II$: 2-units prosthesis was fabricated with two Lifecore STAGE-1 Single Stage Implant $System^(R)$ of internal connection type. In fabricating 2-units prosthesis, two hexed abutments are recommended when two implants are installed parallel, otherwise one hexed abutment is used on major occlusal force area and one nonhexed abutment is used on the other area. Since it is rare to find two implants being parallel, it is hard to fabricate prosthesis with passive adaptation using two hexed abutments. It is much more difficult to acquire passive adaptation when using hex abutment compared to nonhex abutment. To evaluate the influence of hexed and nonhexed abutment on screw loosening, 2-units prosthesis was fabricated with hexed and nonhexed abutment. Experimental group is classified into three groups. 1) $G_2-HH$: 2-units prosthesis was fabricated with two hexed abutments. 2) $G_2-HN$: 2-units prosthesis was fabricated with one hexed abutment and one nonhexed abutment. 3) $G_2-NN$: 2-units prosthesis was fabricated with two nonhexed abutments. Result: The results of comparing the detorque value after loading on a each prosthesis periodically are as follows. 1. In splinting group of external and internal connection implant, $G_1-II$ group demonstrated the biggest detorque value, followed by $G_1-EI$ group and $G_1-EE$ group. 2. There is no notable significance between external connection implant of $G_1-EI$ group and $G_1-EE$ group and also no significance between internal connection implant of $G_1-EI$ group and $G_1-II$ group. 3. $G_2-HH$ group showed higher detorque value than $G_2-HN\;and\;G_2-NN$ group. From the results, we can concluded that using both external connection and internal connection implant together is clinically acceptable and in order to acquire a good passive adaptation in fabricating 2-units implant prosthesis we can use two nonhexed abutments.

• Clinical and Experimental Pediatrics
• /
• 제58권12호
• /
• pp.505-508
• /
• 2015

It is uncommon for pediatric patients with rhabdomyosarcoma to present with clinical and/or laboratory features of disseminated intravascular coagulation (DIC). We report a case of metastatic alveolar rhabdomyosarcoma with severe bleeding because of DIC in a 13-year-old boy. He experienced persistent oozing at the site of a previous operation, gross hematuria, and massive epistaxis. Two weeks after initiating combination chemotherapy consisting of vincristine, doxorubicin, and cyclophosphamide, the patients' laboratory indications of DIC began to resolve. During this period, the patient received massive blood transfusion of a total of 311 units (26 units of red blood cells, 26 units of fresh frozen plasma, 74 units of platelet concentrates, 17 units of single donor platelets, and 168 units of cryoprecipitate), antithrombin-III and a synthetic protease inhibitor. Despite chemotherapy and radiation therapy, he died 1 year later because of disease progression. In children with metastatic rhabdomyosarcoma and massive DIC, prompt chemotherapy and aggressive supportive care is important to decrease malignancy-triggered procoagulant activities.

• Computers and Concrete
• /
• 제10권2호
• /
• pp.197-217
• /
• 2012

This research deals with the prediction of compressive strength of normal and high strength concrete using neural networks. The compressive strength was modeled as a function of eight variables: quantities of cement, fine aggregate, coarse aggregate, micro-silica, water and super-plasticizer, maximum size of coarse aggregate, fineness modulus of fine aggregate. Two networks, one using raw variables and another using grouped dimensionless variables were constructed, trained and tested using available experimental data, covering a large range of concrete compressive strengths. The neural network models were compared with regression models. The neural networks based model gave high prediction accuracy and the results demonstrated that the use of neural networks in assessing compressive strength of concrete is both practical and beneficial. The performance of model using the grouped dimensionless variables is better than the prediction using raw variables.

• 대한지구과학교육학회지
• /
• 제6권2호
• /
• pp.93-100
• /
• 2013

The purpose of this study is to examine the effect of science related attitudes and science inquiry skill that apply concept maps for 'Ocean' units in middle school science. The subjects of this study consist of four classes third grade middle school students of the Busan Metropolitan City, which were divided into two groups: one is the experimental group which applied concept map teaching and the other is the ordinary teaching group. The result of this study were shown as follow: First, the use of concept map teaching improved the active meaningful process and improved student's science related attitudes in the experimental group. Second, the science lesson using concept map is effective for science inquiry skill in the experimental group. Third, the using concept map teaching created a positive reaction to make the formulation of ideas.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.321-324
• /
• 2002

Nowadays variable delay arithmetic units have been used for implementing a datapath of\ulcorner target system in pursuit of performance improvement. However. adoption of variable delay arithmetic units requires modification of a typical synchronous control units design methodology. There is a representative approach, which is called a monolithic approach. Although its results are good, its proposed methodology may cause critical problems in the aspects of area and performance with the size increase of initial system specifications. In order to solve this problems, a distributed approach is suggested. Experimental results show that the Proposed method can guarantee original performance of an initial system specification with minimized additional area increase.

• 대한음성학회지:말소리
• /
• 제47호
• /
• pp.15-29
• /
• 2003

When intonation in French is analysed in terms of a multi-dimentional and hierarchical structure, each of the prosodic units such as accent phrases(having different combinations of the basic tonemes L and H), pre-sentencial and post-sentencial long pauses, intonation phrases(containing boundary intonation), as well as intermediate phrases can be considered being realized on a separate tier. Unlike on the tiers where accent phrases and intonation phrases occur, an intonation rhythm consisting of plateaus is realised on that of intermediate phrases. This intonation rhythm consisting of plateaus is one of the significant factors that lead a basic French metrical rhythm. This paper first shows the types of combinations of the basic tonemes L and H found in French accent phrases. Secondly, this paper examines the roles intermediate phrases and plateaus play in French. Finally, this paper argues that intermediate phrases are the metrical units actually adopted as real utterance units in French.