• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.246-251
• /
• 2000

In this paper, Wire electric discharge grinding(WEDG) method for manufacturing the micro shaft was introduced and the machining characteristics was investigated. from the experimental results, it was concluded that high surface integrity could be obtained by use of dielectric fluid spraying method and small capacitive condenser.

• 한국의류산업학회지
• /
• 제2권5호
• /
• pp.437-442
• /
• 2000

In this paper, in order to examine the torsional behaviour of twisted yarn closely, the torsional rigidity would be derived in terms of physical and mechanical characteristics of its constituent fibers and yarn structural parameters by energy-method. And the propriety of the theory will be discussed by comparing with experimental results. The torsional rigidity of yarn in both experimental and theoretical results decreases with surface helix angle increases. But the experimental values are more higher than those of the theoretical ones.

• 소성∙가공
• /
• 제11권7호
• /
• pp.614-619
• /
• 2002

For an accurate measurement of the material behavior of small structures, a new optical experimental technique is proposed to measure the deformation. The test method uses the dual microscope that can measure the relative deformation of two adjacent regions. The magnified view is captured by CCD cameras and the relative deformation can be measured by the pattern matching and tracing method. Using this experimental technique, the deformation of solder joints in electronic packaging and the strain of the nickel thin film are measured.

• 한국초등과학교육학회지:초등과학교육
• /
• 제33권1호
• /
• pp.129-139
• /
• 2014

This study was conducted to examine the effect of elementary science class using name card method on scientific learning motivation and academic achievement of elementary students. Two sixth grade classes were divided into experimental group and comparison group to treat the experimental group with elementary science class using name card method. General class according to teacher manual was implemented for the comparison group. Elementary science class applying name card method was conducted for 10 sessions throughout the experimental period of 8 weeks. The results of this study were as follows. First, elementary science class with name card method was effective in improving scientific learning motivation. Second, elementary science class with name card method had significant effect on improvement of scientific learning academic achievement. The study results showed that elementary science class with name card method was effective for scientific learning motivation and academic achievement of elementary students.

• Structural Engineering and Mechanics
• /
• 제56권1호
• /
• pp.27-47
• /
• 2015

In this study, the accuracy and reliability of fully nonlinear method against equivalent linear method for dynamic analysis of soil-structure interaction is investigated comparing the predicted results of both numerical procedures with the results of experimental shaking table tests. An enhanced numerical soil-structure model has been developed which treats the behaviour of the soil and the structure with equal rigour. The soil-structural model comprises a 15 storey structural model resting on a soft soil inside a laminar soil container. The structural model was analysed under three different conditions: (i) fixed base model performing conventional time history dynamic analysis, (ii) flexible base model (considering full soil-structure interaction) conducting equivalent linear dynamic analysis, and (iii) flexible base model performing fully nonlinear dynamic analysis. The results of the above mentioned three cases in terms of lateral storey deflections and inter-storey drifts are determined and compared with the experimental results of shaking table tests. Comparing the experimental results with the numerical analysis predictions, it is noted that equivalent linear method of dynamic analysis underestimates the inelastic seismic response of mid-rise moment resisting building frames resting on soft soils in comparison to the fully nonlinear dynamic analysis method. Thus, inelastic design procedure, using equivalent linear method, cannot adequately guarantee the structural safety for mid-rise building frames resting on soft soils. However, results obtained from the fully nonlinear method of analysis fit the experimental results reasonably well. Therefore, this method is recommended to be used by practicing engineers.

• 대한기계학회논문집
• /
• 제14권6호
• /
• pp.1679-1688
• /
• 1990

본 연구에서는 역산법으로 열확산계수를 추정하기 위하여 비선형 매개변수 추 정법을 사용하며, 실험데이터의 통계적 처리방법, 추정이론을 정리하여 이 추정법에 적합한 알고리즘을 만들었다. 수정된 Gauss법을 컴퓨터에 사용할 수 있도록 프로그 램을 개발하였으며, 이 방법의 정확성을 증명하기 위하여 일정열유법과 동일한 실험장 치를 사용하되 경계조건이나 초기조건을 시간의 변화에 따라 이산적으로 측정하여, 매 개변수인 열확산계수를 온도의 함수로 찾고자 하였으며, 통계적인 개념보다는 역산적 인 면에 더 치중하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.755-756
• /
• 2013

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.172-176
• /
• 2000

The paper presents the fault detection and isolation of two DC-DC converters parallel operation by ZCT method. Two experimental prototype converters were designed and implemented for evaluation of fault tolerant system. The experimental results show that fault detection and isolation circuit works very well.

• 대한조선학회지
• /
• 제5권2호
• /
• pp.35-44
• /
• 1968

The longitudinal cut method of experimental ship wave analysis, originally developed by J.N. Newman, is presented and various plausible sources of error are discussed. A further use of autocorrelation function and crosscorrelation function when two wave systems are superposed is indicated.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.184-191
• /
• 2010

This paper proposes the shaking table testing method for replicating the dynamic behavior of soil-structure interaction (SSI) system, without any physical soil model and only using superstructure model. Applying original SSI system to the substructure method produces two substructures; superstructure and soil model corresponding to experimental and numerical substructures, respectively. Interaction force acting on interface between the two substructures is observed from measuring the accelerations of superstructure, and the interface acceleration or velocity, which is the needed motion for replicating the dynamic behavior of original SSI system, is calculated from the numerical substructure reflecting the dynamic soil stiffness of soil model. Superstructure is excited by the shaking table with the motion of interface acceleration or velocity. Analyzing experimental results in time and frequency domains show the applicability the proposed methodologies to the shaking table test considering dynamic soil-structure interaction.