• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.4
• /
• pp.799-806
• /
• 1989

Component mode synthesis (CMS) method can be divided into free, fixed and hybrid interface method according to each component's connecting conditions. In this paper, major mode synthesis methods were reviewed and their accuracies were examined by comparing the calculated eigenvalues with those from full finite element (FE) model. Also, CMS is expanded into the coupling between finite element (FE) and experimental model. Since the assumed experimental data seldom have slope information, the slope information at the interface points is prepared by curve-fitting of the calculated values. A simple beam structure to show the effectiveness of the above method, and we found that it can improve the accuracy of the synthesis method in calculation, expecially in the low modes.

• Journal of the Korean Society of Safety
• /
• v.22 no.1 s.79
• /
• pp.47-53
• /
• 2007

A study is carried out to evaluate the stresses for steel box girder support diaphragm using finite elements method. This study includes the stress characteristic compared with experimental method for diaphragm design. The results from the finite elements method are compare with the results from experimental investigations and shown to give good agreement. The shear stresses were generally uniformed in the outer plane. increased rapidly above the bearing. The horizontal direct stresses were generally low except in the vicinity of the bearing and opening comer where a local increase in compressive stresses occured.

• Water for future
• /
• v.14 no.2
• /
• pp.53-62
• /
• 1981

In the Hydraulic Structure, Such as dam body or levee of river that is constructed with soil, We analyzed a top line of free ground water table. This study is based on the logical reason that the pressure on the free surface is atmospheric and the seepage line is a stream line. In order to research for the unknown seepage line. We analyzed seepage water of steady flow through parous media by Finite Element method based on Galerkin Principle, and compared the comluted value with experimental value. The results show that the computed value was nearly equal to the experimental value. Finally, it noticed that finite Element method was more practical than Experimental Method for Seepage line analysis.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.10a
• /
• pp.414-421
• /
• 1996

The study of the vibration characteristics of annular sector plates which are clamped along their inner circumferential edge is important for structural engineers. The present analysis consists of experimental method and numerical method. The experimental method using time-average holographic interferometry is obtained vibration modes and frequencies. The experimental results are verified by a numerical method using F.E.M. The important aspects of the present paper is the dependence of the natural frequencies and the mode shape on the annular area changing sector angle. The radial nodal lines converge to the center of the plate. As increasing sector angle, the radial modes are predominant.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.10a
• /
• pp.160-165
• /
• 1997

Structural boundary condition is very important as a part of a structural system because it determines the dynamic characteristics of the structure. It is often to experience that experimental measurements of structural dynamic characteristics are somewhat different from the analytical predictions in which idealized boundary conditions are usually assumed. However, real structural boundary conditions are not so ideal; not perfectly clamped, for instance. Thus this paper introduces a new method to determine the non-ideal structural boundary conditions in the frequency domain. In this method, structural boundary conditions are modeled by both extensional (vertical) and torsional elastic springs. The effective springs are then determined from experimental FRFs (frequency response functions) by using the spectral element method (SEM). For a cantilevered beam experiments are conducted to determine the real boundary conditions in terms of effective springs. Dynamic characteristics (analytically predicted) based on identified boundary conditions are found to be much closer to experimental measurements when compared with those based on ideal boundary conditions.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.6 no.4
• /
• pp.181-188
• /
• 2002

The objective of this study is to determine crack depth located under steel reinforcement in concrete specimens using ultrasonic method. Experimental studies were performed on concrete specimens containing vertical and inclined surface-opening cracks with known depths. The other studies were carried out on specimens with flexural crack. Experimental results have shown that the crack depth is effectually measured when the distance between the probes is less than the crack depth. The effect of steel on crack depth estimation is studied through a model by considering P-waves diffaction at the tip of crack and steel. In addition, experimental results show that the ultrasonic method is one of useful methods to evaluate the crack depth in reinforced concrete.

• Journal of Information Processing Systems
• /
• v.10 no.2
• /
• pp.256-270
• /
• 2014

A new morphed steganographic algorithm is proposed in this paper. Image security is a challenging problem these days. Steganography is a method of hiding secret data in cover media. The Least Significant Bit is a standard Steganographic method that has some limitations. The limitations are less capacity to hide data, poor stego image quality, and imperceptibility. The proposed algorithm focuses on these limitations. The morphing concept is being used for image steganography to overcome these limitations. The PSNR and standard deviation are considered as a measure to improve stego image quality and morphed image selection, respectively. The stego keys are generated during the morphed steganographic embedding and extracting process. Stego keys are used to embed and extract the secret image. The experimental results, which are based on hiding capacity and PSNR, are presented in this paper. Our research contributes towards creating an improved steganographic method using image morphing. The experimental result indicates that the proposed algorithm achieves an increase in hiding capacity, stego image quality, and imperceptibility. The experimental results were compared with state of the art steganographic methods.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.1
• /
• pp.70-74
• /
• 2008

It is important to reduce the vibration and noise of submarines and ships. For the purpose of noise reduction, various researches are actively being conducted on the employment of complex structures. However, in the case of numerical analysis for complex structures with damping materials, substantial errors can be generated by the absence of an exact damping model. Thus experimental model analysis is necessary for the verification of a numerical analysis for complex structures. In this research, vibration experiments are conducted in order to ascertain the vibration properties of cantilever beam attached damping materials. First, an initial value is obtained by using a direct linear method. Next, based on this initial value, the exact modal parameters of the cantilever beam are obtained by using the Newton-Raphson method.

• Structural Engineering and Mechanics
• /
• v.19 no.4
• /
• pp.413-423
• /
• 2005

This paper presents the solution of large static deflection due to uniformly distributed self weight and the critical or maximum applied uniform loading that a simply supported beam with variable-arc-length can resist. Two analytical approaches are presented and validated experimentally. The first approach is a finite-element discretization of the span length based on the variational formulation, which gives the solution of large static sag deflections for the stable equilibrium case. The second approach is the shooting method based on an elastica theory formulation. This method gives the results of the stable and unstable equilibrium configurations, and the critical uniform loading. Experimental studies were conducted to complement the analytical results for the stable equilibrium case. The measured large static configurations are found to be in good agreement with the two analytical approaches, and the critical uniform self weight obtained experimentally also shows good correlation with the shooting method.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.11
• /
• pp.937-942
• /
• 2003

In the present study, low-temperature low-pressure refrigerant storage method is proposed to achieve higher cooling capacity during a short period of time than that of a compressor in steady operation. Experimental apparatus was designed and set up to analyze the performance of the new-conceptual cooling system. Two reservoirs for sequential storage of refrigerant were used in the cooling system. Several on/off solenoid valves were installed for control of refrigerant flow. From the experimental results, the initial rapid cooling by low temperature low-pressure refrigerant storage method was ascertained for successful operation. This rapid cooling methodology shall be useful for other low-capacity refrigeration system.