• 한국전기전자재료학회논문지
• /
• 제25권1호
• /
• pp.6-14
• /
• 2012

For integrated complementary metal oxide semiconductor (CMOS) circuits, the lateral spread for two-dimensional (2-D) impurity distributions are very important for the analyzing the devices. The measured two-dimensional SEM data obtained using the chemical etching-method matched very well with the results of the Gauss model for boron implanted samples. But the profiles in boron implanted silicon were deviated from the Gauss model. The profiles in boron implanted silicon were shown a little bit steep profile in the deep region due to backscattering effect on the near surface from the bombardments of light boron ions. From the simulated 3-D data obtained using an analytical model, the 1-D and 2-D data were compared with the experimental data and could be verified the justification from the experimental data. The data of 3-D model were also shown good agreements with the experimental and the simulated data. It can be used in the 3-D chip design and the analysis of microelectro-mecanical system (MEMS) and special devices.

• Nuclear Engineering and Technology
• /
• 제55권6호
• /
• pp.2088-2095
• /
• 2023

The safety of nuclear installations is largely determined by the tightness of fuel elements cladding. As the Fukushima nuclear accident showed, the main task in case of loss of power supply is to ensure reliable removal of residual heat release from spent fuel pool (SFP) with irradiated fuel assemblies (IFAs). The paper presents the results of calculated-experimental studies and thermal-hydraulic modeling of temperature storage modes of IFAs in SFP. Experimental studies of SFP's temperature regime and calculated evaluation of residual heat removal due to the thermal conductivity of building structures surrounding the SFP were performed. To ensure the safe operation of research reactors, it's necessary to know the IFA's residual heat power (RHP) in the reactor and SFP, which is determined depending on the operating time of fuel assemblies (FAs) and the IFAs calculated holding time. The FAs operating time depends on the reactor energy output. The IFAs calculated holding time is determined by the fuel burnup, U-235 mass in the fuel, and reactor utilization factor. The IFAs fuel burnup was calculated using the MCU-PTR program. Also presented are the RHP's calculation results using some of the empirical dependencies. The concept of a passive heat removal system (PHRS) based on thermosyphon's operating principle was proposed.

• 전력전자학회논문지
• /
• 제4권4호
• /
• pp.311-317
• /
• 1999

본 논문에서는 SEPP-LCC형 부하 공진 고주파 인버터의 한 회로형식을 제안하고, 그 동작원리에 관해서 명확히 하였다. 제안한 인버터는 스위칭 소자 양단에 병렬로 커패시터를 추가함으로써 스위칭 소자의 턴-온과 턴-오프시에 발생하는 스위칭 손실, 노이즈, 스트레스 등을 줄일 수 있다. 범용성 있는 회로해석을 위하여 무차원화 파라미터를 도입하였고, 동작특성 및 평가를 통하여 얻은 특성치를 이용하여 회로를 설계하였다. 또한, 실험을 통하여 이론해석의 정당성을 입증하였다.

• Journal of Information Processing Systems
• /
• 제2권2호
• /
• pp.67-75
• /
• 2006

In order to acquire a precise and quick response to an analytical query, proper selection of the views to materialize in the data warehouse is crucial. In traditional view selection algorithms, all relations are considered for selection as materialized views. However, materializing all relations rather than a part results in much worse performance in terms of time and space costs. Therefore, we present an improved algorithm for selection of views to materialize using the clustering method to overcome the problem resulting from conventional view selection algorithms. In the presented algorithm, ASVMRT (Algorithm for Selection of Views to Materialize using Reduced Table), we first generate reduced tables in the data warehouse using clustering based on attribute-values density, and then we consider the combination of reduced tables as materialized views instead of a combination of the original base relations. For the justification of the proposed algorithm, we reveal the experimental results in which both time and space costs are approximately 1.8 times better than conventional algorithms.

• Computers and Concrete
• /
• 제12권1호
• /
• pp.37-51
• /
• 2013

The responses of reinforced concrete slabs subject to an impact loading near the ultimate load range are explored. The analysis is carried out on a simply supported rectangular reinforced concrete slab using a nonlinear explicit dynamic procedure and considering three material models: Drucker-Prager, modified Drucker-Prager, and concrete damaged plasticity, available in the commercial finite element software, ABAQUS/Explicit. For comparison purposes, the impact force-time response, steel reinforcement failure, and concrete perforation pattern are verified against the existing experimental results. Also, the effectiveness of mesh density and damage wave propagation are studied independently. It is shown that the presently adopted finite element procedure is able to simulate and predict fairly accurate the behavior of reinforced concrete slab under impact load. More detailed investigations are however demanded for the justification of effects coming from an imperfect projectile orientation as well as the load and structural surface conditions, including the impulsive contacted state, which are inevitable in an actual impact environment.

• 한국멀티미디어학회논문지
• /
• 제23권4호
• /
• pp.595-602
• /
• 2020

We propose a generative probabilistic model with Dirichlet prior distribution for topic modeling and text similarity analysis. It assigns a topic and calculates text correlation between documents within a corpus. It also provides posterior probabilities that are assigned to each topic of a document based on the prior distribution in the corpus. We then present a Gibbs sampling algorithm for inference about the posterior distribution and compute text correlation among 50 abstracts from the papers published by IEEE. We also conduct a supervised learning to set a benchmark that justifies the performance of the LDA (Latent Dirichlet Allocation). The experiments show that the accuracy for topic assignment to a certain document is 76% for LDA. The results for supervised learning show the accuracy of 61%, the precision of 93% and the f1-score of 96%. A discussion for experimental results indicates a thorough justification based on probabilities, distributions, evaluation metrics and correlation coefficients with respect to topic assignment.

• 한국수학사학회지
• /
• 제16권2호
• /
• pp.55-70
• /
• 2003

This study investigated tile intuitive level of justification in geometry, as the former step to the aximatization, with concrete examples. First, we analyze limitations that the axiomatic method has in tile context of discovery and the educational situation. This limitations can be supplemented by the proper use of the intuitive method. Then, using the histo-genetic analysis, this study shows the process of the development of geometrical thought consists of experimental, intuitive, and axiomatic steps. The intuitive method of proof which is free from the rigorous axiom has an advantage that can include the context of discovery. Finally, this paper presents the issue of intuitive proving that the three angles of an arbitrary triangle amount to 180$^{\circ}$, as an example of the local systematization.

• BMB Reports
• /
• 제51권4호
• /
• pp.167-173
• /
• 2018

Experimental results obtained from research using only one sex are sometimes extrapolated to both sexes without thorough justification. However, this might cause enormous economic loss and unintended fatalities. Between years 1997 and 2000, the US Food and Drug Administration suspended ten prescription drugs producing severe adverse effects on the market. Eight of the ten drugs caused greater health risks in women. Serious male biases in basic, preclinical, and clinical research were the main reason for the problem. This mini-review will describe why and how funding organizations such as the European Commission, the Canadian Institutes of Health Research, and the US National Institutes of Health have tried to influence researchers to integrate sex/gender not only in clinical research, but also in basic and preclinical research. Editorial policies of prominent journals for sex-specific reporting will also be introduced, and some considerations in integrating sex as a biological variable will be pointed out. To produce precise and reproducible results applicable for both men and women, sex should be considered as an important biological variable from basic and preclinical research.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권1호
• /
• pp.40-47
• /
• 2000

This paper presents a circuit of resonant voltage resultant type DC/DC converter consists of two unit half-bridge high frequency resonant inverters, and describes operating modes, principle and analysis of the proposed circuit. Also, the analysis of the proposed circuit has generally described by using normalized parameters. Based on the characteristic values, a method of the circuit design is proposed. According to phase shift, the output voltage of the proposed circuit can be controlled. In addition, the justification of theoretical analysis was certified by comparing to the experimental waveforms. In the future, this proposed converter show that it can be practically used as the system of fixed DC voltage source etc.

• Computers and Concrete
• /
• 제21권3호
• /
• pp.299-310
• /
• 2018

When reinforced concrete structures are subjected to strong seismic forces, their beam-column connections are very susceptible to be damaged during the earthquake event. Consequently, structural designers try to fit an important quantity of steel reinforcement inside the connection, complicating its construction without a clear justification for this. The aim of this work is to evaluate -and demonstrate- numerically how the quantity and the array of the internal steel reinforcement influences on the nonlinear response of the RC beam-column connection. For this, two specimens (extracted from an experimental test of 12 RC beam-column connections reported in literature) were modeled in the Finite Element code FEAP considering different stirrup's arrays. The nonlinear response of the RC beam-column connection is evaluated taking into account the nonlinear thermodynamic behavior of each component: a damage model is used for concrete; a classical plasticity model is adopted for steel reinforcement; the steel-concrete bonding is considered perfect without degradation. At the end, the experimental responses obtained in the tests are compared to the numerical results, as well as the distribution of shear stresses and damage inside the concrete core of the beam-column connection, which are analyzed for a low and high state of confinement.