• Corrosion Science and Technology
• /
• v.3 no.6
• /
• pp.240-244
• /
• 2004

Recently a variety of electrochemical techniques have been used for the measurement of under-film corrosion of coated steel. Each method has its own characteristic and is suitable to determine some kinds of anti-corrosive mechanisms of coating film. We developed a new under-film corrosion tester (UFCT) which adoped current interrupter technique in principle. Electrochemical parameters can be measured by UFCT. It is possible for the novel under-film corrosion tester to evaluate under-film corrosion of steel covered with high electric resistance coating film which has no defect and is not easy to evaluate it by other methods. Finally some experimental results of protective coating performance obtained by UFCT were discussed.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.14 no.2
• /
• pp.66-75
• /
• 2006

The effect of antifreeze solution liquid film on the frost prevention is experimentally investigated. It is desirable that the antifreeze solution spreads widely on the heat exchanger surface forming thin liquid film to prevent frost nucleation while having small thermal resistance across the film. A porous layer coating technique is adopted to improve the wettability of the antifreeze solution on a parallel plate heat exchanger. The antifreeze solution spreads widely on the heat exchanger surface with $100{\mu}m$ thickness by the capillary force resulted from the porous structure. It is observed that the antifreeze solution liquid film prevents a parallel plate heat exchanger from frosting. The reductions of heat and mass transfer rate caused by the thin liquid film are only $1{\sim}2%$ compared with those for non-liquid film surface.

• 한국가시화정보학회:학술대회논문집
• /
• 2002.11a
• /
• pp.81-84
• /
• 2002

Dispersion of coolant jets in a film cooling flow field is the result of a highly complex interaction between the film cooling jets and the mainstream. In order to investigate the effect of blowing ratios on the film cooling of turbine blade, cylindrical body model was used. Mainstream Reynolds number based on the cylinder diameter was $7.1\;\times\;10^4$. The free-stream turbulence intensity kept at $5.0\%$ by using turbulence grid. The effect of coolant flow rates was studied for blowing ratios of 0.9, 1.3 and 1.6, respectively. The temperature distribution of the cylindrical model surface is visualized by infrared thermography (IRT). Results show that the film-cooling performance may be significantly improved by controlling the blowing ratio. As blowing ratio increases, the adiabatic film cooling effectiveness is more broadly distributed and the area protected by coolant increases. The mass flow rate of the coolant through the first-row holes is less than that through the second-row holes due to the pressure variation around the cylinder surface.

• Journal of computational fluids engineering
• /
• v.16 no.4
• /
• pp.92-99
• /
• 2011

In order to protect the turbine blade from working fluid of high temperature, many cooling techniques such as internal convection cooling, film cooling, impinging jet cooling and thermal barrier coating have been developed. With all other things, film-cooling has been widely used as the important alternative. In the present work, numerical analysis has been performed to investigate and to compare the film-cooling performance of various film-cooling hole schemes such as cylindrical, crescent, louver, and dumbbell holes. To analyze the turbulent flow and the film-cooling mechanism, three-dimensional Reynolds-averaged Navier-Stokes analysis has been performed with shear stress transport turbulence model. The validation of numerical results has been assessed in comparison with experimental data. The characteristics of fluid flow and the film-cooling performance for each shaped hole have been investigated and evaluated in terms of centerline, laterally averaged and spatially averaged film-cooling effectivenesses. Among the film cooling holes, the dumbbell shaped hole shows better film-cooling effectiveness than the other shaped holes. And the louver and cylindrical shaped hole show the worst film cooling performance, and concentrated flows on near the centerline only.

• Journal of Fashion Business
• /
• v.21 no.4
• /
• pp.1-20
• /
• 2017

Fashion film has become a significant communication medium in the $21^{st}$ century. Fashion film, that tells unique quality stories, is a means of communicating brand value emotionally. To examine characteristics of storytelling according to types of fashion film, this study categorizes fashion film and investigates storytelling elements in terms of content, form, and communication. For methodology, a literature review was conducted to examine the concept of storytelling and types of fashion film storytelling. Empirical research was conducted on 32 fashion films from 2007 to recent years of 2017. Results are as follow. First, theatrical fashion film, based on linear narrative structure and closed-ending, is characterized content-based storytelling. Second, avant-garde fashion film, based on unconventional and experimental cinematic techniques, is characterized form-based storytelling. Finally, documentary fashion film that minimizes distortion and reproduces reality of designers' originality, refers to interactive communication-based storytelling which using digital technologies.

• Research in Community and Public Health Nursing
• /
• v.12 no.3
• /
• pp.795-814
• /
• 2001

To evaluate the effect of sex education on middle school students' access to the obscene online computer and video film contents. 154 students were selected as experimental group. and 154 students were selected as control group, sampled randomly from Andong. Kyungbook, Korea. An analysis was performed. A non-equivalent control group pre test-post test research design was used. The data were collected from April 2nd to April 19th. 2001. A pre-survey was done on general characteristics and the condition of accessing obscene online computer and video film contents on both experimental and control group. From the survey results information. sex education contents were put together. The researcher organized 3 ready-made sex education program and explained to the four school health nurses about the ready-made sex education program step by step and they educated their selected students with three classes of 45 minutes lecture. Two weeks after the last lecture, a post-test was conducted. Four weeks from the last lecture, another post-test was conducted. The existing studies by Choi Yongseon(1998) and Kim Hyeok(1998) were reviewed and two professors in the department of community health nursing advised on the study questionnaire writing. An SPSS Win 10.0 was used. The data of respondents' general characteristics were analyzed using frequency and percentage. $X^2$ test was used to verify the homogeneity of the experimental group and the control group. Repeated Measures ANOVA was used to find out whether sex education had an effect on the awareness of obscene online computer and video film contents and under-age prostitution through the online computer networks. and time and frequency of access to the obscene online computer and video film contents. The results of the study are as follow. 1. The results of the verification of homogeneity between the experimental group and the control group showed that there was no significant difference between the experimental group and the control group. 2. The first hypothesis, 'the experimental group which received sex education would have a higher level of awareness of accessing obscene contents than the control group which did not receive the education' was supported at p<0.0001. 3. The second hypothesis. 'the experimental group which received sex education would have a higher level of awareness of underage prostitution on computer networks than the control group which did not receive the education' was supported at p<0.05. 4. The third hypothesis, 'the experimental group which received sex education would spend time less accessing obscene video and computer contents than the control group which did not receive the education' was rejected at p>.05. 5. The 4-1 hypothesis. 'the experimental group which received sex education would access obscene computer contents less frequently than the control group which did not receive the education' was supported at p<0.0001. 6. The 4-2 hypothesis, 'the experimental group which received sex education would access obscene video contents less frequently than the control group which did not receive the education' was supported at p<0.0001. In conclusion, a systematic step-by-step sex education program should be developed to protect middle school students from the harmful online computer and video film access. An effective teaching material for sex education should be prepared to decrease middle school students' access to obscene online computer and video film contents.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.2 s.233
• /
• pp.279-286
• /
• 2005

This study presents experimental results on the heat transfer coefficients in the film boiling region of spray cooling for actual metallurgical process. In this study, the heat flux distributions of a two dimensional dilute spray impinging on a hot plate were experimentally investigated. A stainless steel block was cooled down from intial temperature of about $800^{\circ}C$ by twin fluid (air-water) flat spray. It was found from the experimental results that the heat transfer area was classified into the stagnation region and wall-flow region. In the stagnation region, the experimental data of local heat transfer coefficient was closely correlated with the local droplet-flow-rate supplied from the spray nozzle directly. Thus, the local heat transfer coefficients are in good agreement with the predicted values from the correlations proposed by our previous study. In wall-flow region, however, remarkable differences are observed between experimental data and predicted values because the number of rebound droplets increase with increasing the distance from the stagnation point.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1991.11a
• /
• pp.14-21
• /
• 1991

The performance of finite journal bearing operating in turbulent regime was experimentally investigated. In order to obtain experimental data contained operating conditions(thermal deformation etc.) of bearing, this study measured the pressure and the film thickness with sensors mounted on the journal. And, the continuous pressure profile and the film thickness profile were obtained.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.4
• /
• pp.357-363
• /
• 1990

A thermally stimulated current measurement using a temperature gradient (TG-TSC) has been applied to the study of dipolar depolarization in polymers. It has been clarified that theoretical analysis of TG-TSC in the initial rise region corresponds with the experimental results. We conclude that the experimental results on a cross-linked polyethy-lene (XLPE) film can be explained using the above relation and that the charasteristics obtained from the above theoretical analysis can be used for ascertaining the presence of a constant temperature gradient in a film.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.1
• /
• pp.64-69
• /
• 2000

This paper investigates the equeeze film damping of a perforated planar micromechanical structure that oscillates in the normal direction to the substrate. Special focus has been places on the effect of holes and edges of the perforated planar microstructures on the squeeze film damping of oscillatory motions. Theoretical models and test structures of the squeeze film damping have been developed for the transversely oscillating perforated plates. A set of nine different test structures, having three different sized with three different numbers of perforations, has been fabricated and tested. The experimental Q-factors, measured from the fabricated test structures, are compared with the theoretical values, estimated from finite element analysis. It is found that the finite element analysis overestimates the Q-factors up to 150% of the experimental values. Major discrepancy comes from the inaccuracy of the zero pressure condition, placed by the finite element analysis along the perforated edges.