• 제목/요약/키워드: Experience Dimensions

검색결과 389건 처리시간 0.031초

문화예술교육 참여자의 교육성과 평가가 교육만족에 미치는 영향 (Association between Outcome Evaluation and Satisfaction of Culture and Art Education)

  • 윤니나;박조원
    • 한국콘텐츠학회논문지
    • /
    • 제15권6호
    • /
    • pp.597-605
    • /
    • 2015
  • 이 연구에서는 정부 지원 사회 문화예술교육 중 시민 대상 문화예술교육 프로그램 참가자의 교육성과 평가가 교육만족에 미치는 영향을 알아보기 위해 한국문화예술교육진흥원 설문조사의 원데이터를 2차 분석하였다. 탐색적 요인 분석 결과 교육성과 평가는 교육내용, 교육운영, 교육자원의 3개 요인으로 구성됨이 밝혀졌으며 이들 교육성과 평가요인들은 모두 교육만족에 통계적으로 유의미한 정(+)의 영향을 미치는 것으로 나타났다. 과거 문화예술교육 경험 유무, 참여 형태(단독/동반)를 기준으로 나눈 집단별 분석에서는 각 집단별로 요인별 영향력이 상이한 것으로 파악되었다. 분석된 결과를 바탕으로 문화예술교육의 질 제고를 위한 구체적 방안이 논의되었으며 후속 연구를 위한 아이디어가 제시되었다.

드릴링 센타용 에폭시-그래나이트재 컬럼의 구조물 특성 연구 (Stuctural Characteristics on Drilling Center Column made of Epoxy-granite Material)

  • 원시태
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 1995년도 춘계학술대회 논문집
    • /
    • pp.158-165
    • /
    • 1995
  • A new fungible materal named Epoxy-Granite composite is applied to the column structure of drilling center in order to investigate the advanced dynamic chatateristics comparing with a conventional cast iron material. The dimensions of new colum structure are adjusted to keep the same stiffness (El value) and the manufacturing conditions are formulated based on the preceeding research experience about the development of Epoxy-Granite structural material. The two kinds of experiments are set up. one of which is for the measurement of natural mode and frequency using experimental modal analysis and the other one is for the measurement of vibration amplitude during idling operation of a machine fool. The comparison of maximum, accelerance values at each natural frequency of bending mode shows a Epoxy-Granite column have larger modal damping ratios(over 2times) than a cast iron column. The vibration amplitude of Epoxy-Granite column measued on the bed motor base and top of column are also much smaller (up to 12%) than the case of cast iron column. It is therefore confirmed that a Epoxy-Granite materal exhibits a good anti-vibrational property even if it is used under the actual operational environments of machine eool as a practical structural element.

  • PDF

패션 브랜드 구매경험이 PPL(Product Placement) 커뮤니케이션 효과에 미치는 영향 (The Effect of Buying Experiences of the Fashion Brands on the PPL(Product Placement) Communication Effect)

  • 신수연;홍정민
    • 한국의류학회지
    • /
    • 제31권8호
    • /
    • pp.1222-1230
    • /
    • 2007
  • This study measured the PPL communication effect whether the respondents had purchased the PPL products in the movie or not. The experiment of this study was held to females in their twenties(mostly university or graduate school students), and they answered the questionaries after being exposed to the 15-minute-edited movie. The results were as follows. In cognitive dimension, there were no differences of the recognition and the recall between two groups. In emotional and behavioral dimensions, the group with the purchase experiences of the PPL brands in the movie showed the more positive brand attitude and the higher purchase intention. The implications based on this results are as follows. First, to strengthen the brand image, the brand identity has to be established systematically. Second, the fashion marketers should constantly implement CRM(Customers Relationship Management) to the customers who purchased the brand products to make them loyal customers.

아파트 노후도 평가지표 개발을 위한 기초연구 (A Preliminary Study on Housing Performance Indicators Evaluating the level of Deterioration of Apartments)

  • 조성희;이태경
    • 한국주거학회:학술대회논문집
    • /
    • 한국주거학회 2008년도 춘계학술발표대회 논문집
    • /
    • pp.225-230
    • /
    • 2008
  • High-rise and high-density apartment complexes has been built and supplied on a large scale in the metropolis and metropolitan areas since 1980s in order to solve housing shortage in cities. Recently they are raising deterioration problems for aging more than 20 years. moreover, those problems show very special characters such as simultaneity and a large scale. The purpose of this study is to propose a direction for the development of the evaluating indicators to measure the level of deterioration of apartments. The level of deterioration of apartments can be evaluated by housing performance. In order to evaluate the deterioration comprehensively, the housing performance indicators should be developed on the social, economical, and physical dimension. This study analyzed the concept of the apartment deterioration and compared housing performance indicators through literature review. First of all, when considering various factors in the evaluation of the deteriorated apartments, such as evaluating ranges, attributes and dimensions, housing performance indicators should be structured with the hierarchical framework. Second, housing performance indicators evaluating the level of deterioration of apartments should include social, psychological, and cultural aspects of home environments in order to understand adequately the attitude of the middle class toward services that apartments provide. Third, in previous researches, most criteria have been developed and weighted based on only expert opinions regarding performance indicators. So, It is necessary to include residents' opinions in developing performance indicators since they can provide more practical and feasible aspects the experts could not experience or understand.

  • PDF

상용프로그램을 이용한 강판의 비선형 거동에 대한 신뢰성해석 (Reliability Analysis for Nonlinear Behavior of Steel Plate using Commercial Structural Software)

  • 박석재;김요숙;신영수
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2001년도 가을 학술발표회 논문집
    • /
    • pp.425-431
    • /
    • 2001
  • In order to take account of the statistical properties of probability variables used in the structural analysis, the conventional approach using the safety factor based on past experience usually estimated the safety of a structure. The real structures could only be analyzed with the error in estimation of loads, material characters and the dimensions of the members. But the errors should be considered systematically in the structural analysis. Structural safety could not precisely be appraised by the traditional structural design concept. Recently, new approach based on the probability concept has been applied to the assessment of structural safety using the reliability concept. In this study, safety of structures will estimated by the reliability analysis with commercial structural software that has the tools of nonlinear elastic-plastic 3-D analysis. Experimental test result is compared to results from this research and Coan/sup 1)/ In this paper, AFOSM(Advanced First-Order Second Moment method) is applied with von Mises, Tresca and Mohr-Coulomb failure criterions. The reliability index β and probability of failure P/sub f/ can be obtained by following this practical procedure as judgement a safety of structures and necessity of reinforcing.

  • PDF

신뢰성 해석에 의한 평면응력요소의 설계변수 분석 (A Design Variable Study of Plane Stress Element by Reliability Analysis)

  • 박석재;최외호;김요숙;신영수
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2001년도 봄 학술발표회 논문집
    • /
    • pp.102-109
    • /
    • 2001
  • In order to take account of the statistical properties of probability variables used in the structural analysis, the conventional approach using the safety factor based on past experience usually estimated the safety of a structure. The real structures could only be analyzed with the error in estimation of loads, material characters and the dimensions of the members. But the errors should be considered systematically in the structural analysis. Structural safety could not precisely be appraised by the traditional structural design concept. Recently, new approach based on the probability concept has been applied to the assessment of structural safety using the reliability concept. Thus, the computer program by the Probabilistic FEM is developed by incorporating the probabilistic concept into the conventional FEM method. This paper estimated for the reliability of a plane stress structure by Advanced First-Order Second Moment method using von Mises, Tresca and Mohr-Coulomb failure criterions. The reliability index and failure probability of attained by the Monte Carlo Simulation method with the von Mises criterion were same as PFEM, but the Monte Carlo Simulation were very time-consuming. The variance of member thickness and load could influence the reliability and failure probability most sensitively among the design variables from the results of the parameter analysis. And proper failure criterion must be used to design safely.

  • PDF

Korean Innovation Model, Revisited

  • Choi, Youngrak
    • STI Policy Review
    • /
    • 제1권1호
    • /
    • pp.93-109
    • /
    • 2010
  • Over the last decade, some Korean enterprises have emerged to become global players in their specialized products. How have they achieved such tremendous technological progress in a short period of time? This paper explores that question by examining the characteristics of technological innovation activities at major Korean enterprises. The paper begins with a brief review of the stages of economic growth and science and technology development in Korea. Then, the existing literature, explaining the Korean innovation model, is analyzed in order to establish a new framework for the Korean innovation model. Specifically, Korean firms have experienced three sequential phases, and thus, the Korean model, at the firm level, can be coined as "path-following," "path-revealing," and "path-creating." Then, the stylized facts in the first phase (path-following) and the second phase (path-revealing) are discussed, in the context of empirical evidence from the areas of memory chips, automobiles, shipbuilding, and steel. In terms of technology development, the Korean model has evolved as "collective learning" in the first phase, "collective recombination" of existing knowledge and technology in the second phase, and is assumed as "collective creativity" in the third phase. Ultimately, all three can be classified as "collective creation". Korean firms now face a transition in the modes of technological innovation in order to efficiently implement the third phase. To achieve remarkable progress again, as they did in the past, and to sustain the growth momentum, Korean firms should challenge new dimensions such as creative technological ideas, distinctive technological capabilities, and unique innovation systems -- all of which connote 'uniqueness'. Finally, some lessons from the Korean technological innovation experience are addressed.

중년여성이 경험하는 만성요통의 통증양상 및 영향요인 (Pain Patterns and Factors Affecting of Low Back Pain in Middle-aged Women)

  • 함영림;서복남;안양희
    • 근관절건강학회지
    • /
    • 제14권1호
    • /
    • pp.33-41
    • /
    • 2007
  • Purpose: The purpose of the study was to identify the pain patterns and factors affecting low back pain in middle-aged women with backache. Method: A descriptive research design was utilized. The participants were middle-aged women who visited to two back pain clinics in Wonju from October, 2006 through February, 2007. A total of 195 low back pain patients agreed to participate in this study, and data from 177 were analyzed. Data were collected using a questionnaire which included a modified short-form Korean pain rating scale, demographic factors, factors related to low back pain and health behavior. Descriptive statistics and multiple regression analysis was utilized in the analysis. Results: The mean score for low back pain was relatively low(M=21.57, SD=11.44). Among pain patterns, scores for dull pain were the highest of all the dimensions. In the regression analysis, significant factors affecting low back pain were found to be age, level of education, religion, BMI, experience of pregnancy, delivery type and exercise. These variables explained 24.8% of variance in low back pain(F=3.79, p<.001). Conclusion: These results suggest that nurses need for assessment and intervention to take into consideration pain patterns as well as factors affecting middle-age women with backache.

  • PDF

Innovation Capabilities and Small and Medium Enterprises' Performance: An Exploratory Study

  • ALI, Hazem;HAO, Yunhong;AIJUAN, Chen
    • The Journal of Asian Finance, Economics and Business
    • /
    • 제7권10호
    • /
    • pp.959-968
    • /
    • 2020
  • Research underlined that Small and Medium Enterprises' performance is enhanced by different types of innovation capabilities. This research tends to present a comprehensive model to explain the relationship between innovation capabilities and SMEs' financial and operational performance. Specifically, this study tends to achieve three objectives: explores the set of product, process, organizational and marketing innovation capabilities possessed by owners/managers of SMEs and their impact on Chinese manufacturing SMEs' operational and financial performance dimensions, identify the determinants of innovation capabilities, and determine the contextual factors that moderate innovation capabilities and SMEs' performance. This research employed a qualitative research method using in-depth interviews with eight owners/managers of Chinese manufacturing SMEs. Research findings revealed that product and marketing innovation capabilities have a significant impact on SMEs' financial performance while process and organizational innovation capabilities positively influence SMEs' operational performance. The major determinants of innovation capabilities involved availability of sufficient organizational resources, entrepreneurial orientation, knowledge development and external networks. The contextual moderating factors on the relationship between innovation capabilities and SMEs' performance involved internal factors which are: SME size, SMEs' owner/manager work experience, entrepreneurial mindset; and external factors: market dynamism and cooperation strategies. This paper ends by drawing some concluding remarks and proposing future research avenues.

지구 환경에 대한 예비 중등 교사의 환경 인식 (The Environmental Perceptions of Pre-service Secondary School Teachers about the Global Environment)

  • 정철
    • 한국지구과학회지
    • /
    • 제24권4호
    • /
    • pp.273-280
    • /
    • 2003
  • 이 연구의 목적은 예비 중등 교사를 대상으로 지구 환경에 대한 환경 인식, 지구 환경의 하위 영역에 따른 환경 인식, 그리고 전공에 따른 환경 인식에 차이가 있는지를 조사하는 것이다. 이를 위해 '성장과 기술의 부정적 결과', '인류와 자연의 관계', '삶의 질', '생물권의 한계'의 4가지 하위 영역으로 구성된 NEP 검사 도구를 사용하였다. 연구 결과, 대부분의 예비 중등 교사들은 생태학적 환경 인식을 지니고 있었으며, 전공에 따라서도 유사한 환경 인식을 지니고 있었다. 그러나, 환경 관련 교육의 경험 유무에 따라서는 유의한 차이를 나타내었다.