• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.5
• /
• pp.108-115
• /
• 2008

Recently, a demand of the digital dimmer system is increasing steadily, but domestic research is not sufficient to the expectation. In this paper, a digital dimmer equipment is developed and resented to compose a system. Digital dimmer system compose console and dimmer rack. Console controls of user interface and a total system, and dimmer rack controls brightness of lighting equipment by a way of phase angle control with each illumination level to get from console.

• Journal of Information Technology Services
• /
• v.1 no.1
• /
• pp.7-15
• /
• 2002

The role of SI in this IT era is recognized high as a value-creating activity in the overall industries. But the valuation factors are not so attractive compared to other industries. Among the negative factors are the relatively high cost of sales and operating cost, the lack of technical differentiation among the firms, the low level of entry barrier, and the resulting competition in the SI industry. But some positive factors such as the expectation for the overall introduction of IT into eoconomy, development of SM (System Management) projects, and the sales of developed soultions and components increase the value of SI firms.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.3
• /
• pp.159-168
• /
• 2021

Precise Point Positioning-Real Time Kinematic (PPP-RTK) is an improved PPP method that provides the user receiver with satellite code and phase bias correction information in addition to the satellite orbit and clock, thus enabling single-receiver ambiguity resolution. Single station PPP-RTK concept is special case of PPP-RTK in that corrections are computed, instead of a network, by only one single GNSS receiver. This study is performed to experimentally verify the positioning accuracy performance of single baseline RTK level by a user who utilizes correction for a single station PPP-RTK using dual frequencies. As an experimental result, the horizontal and vertical 95% accuracy was 2.2 cm, 4.4 cm, respectively, which verify the same performance as the single baseline RTK.

• KDI Journal of Economic Policy
• /
• v.43 no.2
• /
• pp.81-101
• /
• 2021

This paper estimates the expectation-augmented Phillips curve, which explains inflation dynamics, in Korea. The phenomenon of low inflation in Korea has been going on for quite some time, in particular since 2012. During the Covid-19 crisis, due to low inflation expectations the operation of monetary policy was limited as the base rate approached the zero lower bound. The main objective of this paper is to estimate where and how tightly inflation expectations are anchored. It was found that long-term inflation expectations fell to around 1%, falling short of the inflation target, and that inflation expectations are strongly anchored to long-term expectations, which implies that the low inflation phenomenon is likely to extend into the future. The results also imply that even if inflation fluctuates due to temporary disturbances, it may converge to a level below the inflation target. The slight rebound of long-term expectations during the Covid-19 crisis suggests that the aggressive monetary policy may have contributed to improving economic agents' beliefs about the commitment of monetary authorities to inflation stability. This may also help long-term expectations gradually to approach the inflation target.

• Journal of Technologic Dentistry
• /
• v.44 no.2
• /
• pp.38-46
• /
• 2022

Purpose: This study aims to confirm the effect of clinical practice on dental technology students by comparing preclinical expectations and post-training satisfaction of dental technology students in Suwon-si, Gyeonggi-do during the coronavirus disease pandemic. Methods: This study included students enrolled in the Department of Dental Technology of D University in Suwon-si, Gyeonggi-do. The purpose of the study was explained in advance and 70 students agreed to participate in the survey. IBM SPSS Statistics version 18.0 was used for data analysis and the significance level was tested at p=0.05. Results: There were significant differences in clinical practice content, operation, institutional expectations, and satisfaction. Conclusion: Based on the differences in expectations and satisfaction in this study, schools, industries, and associations can study ways to increase satisfaction in terms of clinical practice content, operation, and institution to present directions for dental technology and clinical practice.

• International Journal of Advanced Culture Technology
• /
• v.12 no.3
• /
• pp.237-242
• /
• 2024

Lecturers' self-efficacy in teaching influences many different factors, including their instructional patterns, performance expectation level from learners, quality of learning environment, and interpersonal relationships within the community. The present study attempted to explore perspectives of college lecturers regarding this topic in order to draw meaningful conclusions and implications. To this end, four college instructors from two different higher education institutions participated in an online questionnaire. The results showed that positive attitudes and active responses of learners, and a high degree of freedom to prepare lectures tend to improve their quality of self-efficacy in teaching. On the other hand, classes that are either too easy to hard, inactiveness among learners, and heavy workload other than teaching can worsen teaching efficacy. Lastly, the participant lecturers believed that their self-efficacy are would foster if they are allowed to choose courses they wish to teach, observe a more experienced instructor's lectures, and teach smaller size classes. Findings are likely to contribute to enhanced understanding of features that are likely to affect quality of self-efficacy in teaching among college lecturers.

• Journal of Distribution Science
• /
• v.9 no.2
• /
• pp.111-122
• /
• 2011

The purpose of this study is to survey the successful cases of small and medium Business Systematization Cognition by examining their entrepreneurial characteristics and analysing the factors affecting their success. To that end, previous studies on the association types of small businesses were studied. A research model was developed, and research hypotheses for an empirical analysis were established upon it. Suh et al. (2010) insist on the importance of Small Business Systematization in Korea but also show that small business performance is suffering: they are too small to stand alone. That is why association is so crucial for them: they must stand together. Unfortunately, association is difficult, as they have few specific links and little motivation. Even in franchising networks, association tends to be initiated by big franchisers, not small ones. In that sense, association among small businesses is crucial for their long-term survival. With this in mind, this study examines how they think and feel about the issue of 'Industrial Classification', how important Industrial Classification is to their business success, and what kinds of problems it raises in the markets. This study seeks the different cognitions among the association types of small businesses from the perspectives of participation motivation, systematization expectation, policy demand level, and management performance. We assume that different industrial classification types of small businesses will have different cognitions concerning these factors. There are four basic industrial classification types of small businesses: retail sales, restaurant, service, and manufacturing. To date, most of the studies in this area have focused on collecting data on the external environments of small businesses or performing statistical analyses on their status. In this study, we surveyed 4 market areas in Busan, Masan, and Changwon in Korea, where business associations consist of merchants, shop owners, and traders. We surveyed 330 shops and merchants by sending a questionnaire or visiting. Finally, 268 questionnaires were collected and used for the analysis. An ANOVA, T-test, and regression analyses were conducted to test the research hypotheses. The results demonstrate that there are differences in cognition depending upon the industrial classification type. Restaurants generally have a higher cognition concerning job offer problems and a lower cognition concerning their competitiveness. Restaurants also depend more on systematization expectation than do the other industrial classification types. On the policy demand level, restaurants have a higher cognition. This study identifies several factors that are contributing to management performance through differences in cognition that depend upon association type: systematization expectation and policy demand level have positive effects on management performance; participation motivation has a negative effect on management performance. We confirm also that the image factors of different cognitions are linked to an awareness of the value of systematization and that these factors show sequential and continual patterns in the course of generating performances. In conclusion, this study carries significant implications in its classifying of small businesses into the four different associational types (retail sales, restaurant, services, and manufacturing). We believe our study to be the first one to conduct an empirical survey in this subject area. More studies in this area will likely use our research frameworks. The data show that regionally based industrial classification associations such as those in rural cities or less developed areas tend to suffer more problems than those in urban areas. Moreover, restaurants suffer more problems than the norm. Most of the problems raised in this study concern the act of 'associating itself'. Most associations have serious difficulties in associating. On the other hand, the area where they have the least policy demand is that of service types. This study contributes to the argument that associating, rather than financial assistance or management consulting, promotes the start-up and managerial performance of small businesses. This study also has some limitations. The main limitation is the number of questionnaires. We could not survey all the industrial classification types across the country because of budget and time limitations. If we had, we could have produced many more useful results and enhanced the precision of our analysis. The history of systemization is very short and the number of industrial classification associations is relatively low in Korea. We should keep in mind, though, that this is very crucial to systemization entrepreneurs starting their businesses, as it can heavily affect their chances of success. Being strongly associated with each other might be critical to the business success of industrial classification members. Thus, the government needs to put more effort and resources into supporting the drive of industrial classification members to become more strongly associated.

• The Journal of the Korea Contents Association
• /
• v.18 no.10
• /
• pp.289-297
• /
• 2018

This study analyzed the Entrepreneurial Competencies of Science and Technology Personnel from the point of view of the industry's demanders. It is necessary to change institutional and policy support from quantitative support to improvement of qualitative level. Specifically, this study used the Borich's Needs Assessment Model to determine what capabilities are currently lacking and which should be supplemented. As a result of analysis, it showed that the current level was lower than expected level. Especially, expectation level was high in order of team working, problem solving ability, communication, abstract thinking, job knowledge, Autonomy, leadership, risk-taking, and commercialization are all lower than the overall average. In the analysis of educational need, the most important factor of entrepreneurial competence appeared in order of problem solving ability, teamworking, job related knowledge, abstract thinking, and communication. This means that it is necessary to logically solve the problems that are encountered in various situations in the organization by using cooperation between the teams and their own job knowledge. In addition, education should be conducted to effectively communicate the results to others.

• International Journal of Highway Engineering
• /
• v.14 no.6
• /
• pp.139-148
• /
• 2012

PURPOSES : The accuracy of travel time information is a key measure of effectiveness and reliability of advanced traveler information systems. This study aims at investigating drivers' perception on the acceptable level of information accuracy and their corresponding valuations. METHODS : A questionnaire survey was executed for collecting driver perception data to capture the expectation level of travel time information provided and their willingness to pay for the information. A Tobit model was adopted for exploring the relationship among the acceptable level, driver socioeconomic characteristics and travel attributes. Since drivers' willingness to pay for accurate travel time information can be different according to their travel lengths, a piecewise linear regression model was developed to capture the sensitivity of values of travel time information to travel length. RESULTS : The analysis results suggest that trip purpose and travel time are two dominant factors to determine drivers' acceptable level of travel time information. For business and short trips, drivers want more accurate information than for non-business and long trips. Drivers' willingness to pay for travel time information also varies depending on their incomes, trip purposes and travel lengths. The results also show that drivers' valuation of travel time information provided is sensitive to their travel length. For longer trips, drivers are less sensitive to travel time information and then put less value on the information provided. CONCLUSIONS : Censored nonlinear regression models are developed to estimate drivers' acceptable accuracy for travel time information and their valuation using questionnaire survey data. The findings on drivers perception to the required accuracy of travel time information and their corresponding willingness to pay can be used in the design and deployment of advanced traveler information system to improve its effectiveness and usefulness through high compliance.

• Korea Journal of Hospital Management
• /
• v.2 no.1
• /
• pp.65-79
• /
• 1997

This study aims to measure in-patients' willingness to choose the same hospital, and to define the related factors. The willingness was measured by the fact whether in-patients would return to the same hospital for their future hospitalization and can be said as the essence of ascertaining patients' satisfaction. Data was collected from 236 patients hospitalized in two hospitals selected according to its superiority, one being superior in medical technique, the other being superior in facility and equipment. To enhance the comparability between the two hospitals, the department and the diagnosis were matched, and structured questionnaires were self-fill-up. The main findings are as follows. Hospitals were analyzed by their superiority : medical services, facility and equipment. In case of hospitals with superior medical services, the willingness was proportional to positive doctor-patient relationship, to satisfaction with the medical level, and to the acknowledgement of utility in cure. In case of hospitals with superior facility and equipment, the willingness was proportional to the satisfactory state of overall facility. Two types of hospitals were combined and analyzed. The willingness for choosing hospitals with superior medical services was stronger than that for choosing the other hospitals. The satisfaction with overall facility, satisfaction with medical level, acknowledgement of utility in cure, positive doctor-patient relationship, and better consultation produced higher willingness to choose the same hospital. The willingness for the option shows to what degree the hospital suffices patients' expectation. Patients' understanding views were obviously influential. The satisfaction level for medical aspect was more influential than the level for non-medical aspect.