• 인지과학
• /
• 제34권1호
• /
• pp.39-66
• /
• 2023

뉴미디어는 사회적 교류의 장을 인터넷으로 옮겨와 대규모 집단이 시공간의 한계를 뛰어넘어 한 곳에서 소통할 수 있게 만들었다. 최근 연구는 인간의 사회적 능력이 소셜 미디어를 통해 경험하는 확장된 집단 스케일을 따라가지 못하는 사례를 보고하기도 한다. 이러한 맥락에서, 본 연구는 인간의 사회적 정보 지각이 인구 집단 스케일의 확장에 영향을 받는지 다수편향 맥락에서 확인하였다. 인터넷 기반 과제를 통해 구성원의 수로 나타낸 집단 크기와 전체에서 특정 집단이 차지하는 집단 비율이 개인에게 지각되고 다수편향적 사회적 정보 활용에 영향을 주는 심리적 과정을 조사하였으며, 전체 집단 스케일의 확장에 각 과정이 영향을 받는지 살펴보았다. 집단 비율은 다수편향에 정적 영향을 주고 있으며, 그 관계는 비율 지각에 의해 부분매개 되었다. 전체 집단 스케일은 집단 비율과 비율 지각의 관계를 조절하지 않았다. 반면, 집단 크기와 다수편향의 상관은 유의하지 않았다. 전체 집단 스케일은 집단 크기 지각을 조절하였다. 전체 집단 스케일이 작은 조건에서 집단 크기와 크기 지각은 양적 상관을 나타냈지만, 전체 집단의 스케일이 확장된 조건에서 지각된 집단 크기는 유의미하게 작아졌고, 두 변수는 상관을 잃었다. 이러한 결과를 통해 집단 크기 지각과 관련된 심리 기제가 전체 집단 스케일의 확장에 제대로 반응하지 못하고 있음을 확인하였다. 나아가 집단 크기 정보를 처리하는 전문화된 심리 기제가 존재할 가능성과 다수편향이 특이적으로 받아들이는 자극의 형태를 진화심리적 관점에서 논하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1248-1253
• /
• 2011

It is increasing construction of long span railway bridge with concrete track system for speed up of railway and efficient maintenance of track. As the sleeper of the concrete track system layed on a bridge is fixed on deck of the bridge, the displacement of the sleeper and deck is same. Therefore, the spacing between two sleeper installed at the end of the adjacent deck near the expansion joint of bridge becomes vary according to the longitudinal expansion of a deck by temperature change. By the way, if the spacing of sleepers become increase excessively, it causes large bending stress of in a rail, and it can leads failure or reduction of fatigue life of the rail. Further more, the excessive displacement of the rail may induce decrease ride comfort as well as corrugation of rail surface. Therefore, it is required to determine the allowable maximum sleeper spacing to prevent such problems. For the purpose, investigation on the influence factor on sleeper spacing for straight track was carried out. Variation of bending moment in a rail, wheel force, and the ratio of primary and secondary deflection of the rail according to sleeper spacing was investigated, and, as a result, the maximum allowable sleeper spacing at the bridge expansion joint was suggested.

• International Journal of Concrete Structures and Materials
• /
• 제8권4호
• /
• pp.315-326
• /
• 2014

This study evaluates the dosages of Class F fly ash, lithium nitrate and their combinations to suppress the excessive expansion caused by alkali-silica reactivity (ASR). In order to serve the proposed objective, the mortar bar specimens were prepared from (1) four dosages of Class F fly ash, such as 15, 20, 25 and 30 % as a partial replacement of Portland cement, (2) up to six dosages of lithium nitrate, such as lithium-to-alkali molar ratios of 0.59, 0.74, 0.89, 1.04, 1.19 and 1.33, and (3) the combination of lithium salt (lithium-to-alkali molar ratio of 0.74) and two dosages of Class F fly ash (15 and 20 % as a partial replacement of Portland cement). Percent contribution to ASR-induced expansion due to the fly ash or lithium content, test duration and their interaction was also evaluated. The results showed that the ASR-induced expansion decreased with an increase in the admixtures in the mortar bar. However, the specimens made with the both Class F fly ash and lithium salt produced more effective mitigation approach when compared to those prepared with fly ash or lithium salt alone. The ASR-induced expansions of fly ash or lithium bearing mortar bars by the proposed models generated a good correlation with those obtained by the experimental procedures.

• 대한기계학회논문집B
• /
• 제26권3호
• /
• pp.384-393
• /
• 2002

The effects of hole expansion angle and the arrangement of nozzles on a film cooling system for a turbine-blade-shaped surface were experimentally investigated. Liquid crystal with flue-temperature correlation and an image processing system were employed to evaluate surface temperature. Distributions of cooling effectiveness were then presented to figure out the change of heat transfer characteristics with different geometric conditions of cooling-holes. It was found thats the averaged cooling efficiency on the suction surface was maximum with 10 degree of the cooling hole expansion angle. It was also shown that the averaged cooling efficiency on the pressure surface and the averaged cooling efficiency for dual array case were not affected by the hole expansion angle.

• 한국자동차공학회논문집
• /
• 제7권5호
• /
• pp.66-72
• /
• 1999

It is necessary to discuss lightening engine parts and reducing the friction of sliding parts to improve fuel consumption and combustion stability at idling condition. Lean best torque combustion which produce maximum power at a lean air-fuel ratio is effective for the reduction of exhaust gas emission and the improvement of fuel consumption. Accordingly, this study deals with the expansion of lean combustible limitation, the combustion stability and the reduction of idle speed through the analysis of combustion characteristics on the base of the control technique of precise air-fuel ratio because it does not need to maximum power at idling condition. The idle speed is increased proportional to ISC(Idle Speed Control) duty ratio. On the other hand the idle speed decreased by lean air-fuel ratio. The COV in engine speed is stable within maximum two percent up to 17.6 mixture ratio by the control of ISC duty ratio.

• Steel and Composite Structures
• /
• 제38권2호
• /
• pp.151-164
• /
• 2021

During the pipe forming process, a steel plate undergoes inelastic behavior multiple times under a load condition repeating tension and compression in the circumferential direction. It derives local reduction or increase of yield strength within the thickness of steel pipes by the plastic hardening and Bauschinger effect. In this study, a combined hardening model is proposed to effectively predict variations of yield strength in the circumferential direction of API-X65 and X70 steel pipes with relatively low t/D ratio during the forming process, which is expected to experience accumulated plastic strain of 2~3%, the typical Lüder band range in a low-carbon steel. Cyclic tensile tests of API-X65 and X70 steels were performed, and the parameters of the proposed model for the steels were calibrated using the test results. Bending-flattening tests to simulate repeated tension and compression during pipe forming were followed for API-X65 and X70 steels, and the results were compared with those by the proposed model and Zou et al. (2016), in order to verify the process of material model calibration based on tension-compression cyclic test, and the accuracy of the proposed model. Finally, parametric analysis for the yield strength of the steel plate in the circumferential direction of UOE pipe was conducted to investigate the effects of t/D and expansion ratios after O-forming on the yield strength. The results confirmed that the model by Zou et al. (2016) underestimated the yield strength of steel pipe with relatively low t/D ratio, and the parametric analysis showed that the t/D and expansion ratio have a significant impact on the strength of steel pipe.

• 유통과학연구
• /
• 제13권7호
• /
• pp.53-61
• /
• 2015

Purpose - This research analyzes overseas expansion support systems for small- and medium-sized enterprises in Germany and Japan. Germany and Japan have developed overseas expansion support policies for such enterprises. The study then explores the implications for Korea and its local governments. Research design, data, and methodology - We did a comparative analysis of Japan and Germany and their support for overseas expansion of small and medium companies. Data were mainly collected from the Ministry of Economy, Trade and Industry (Japan) and the Germany Trade and Invest (Germany) agency through statistics and literature surveys, and analysis studies. Results - First, human resources cultivation and funding support policies, which both Germany and Japan use as part of small- and medium-sized enterprise policies, should be modified to Korean circumstances and to reflect its own small- and medium-sized enterprise support needs. Second, both the German policies that support overseas expansion of small- and medium-sized enterprises and those of Japan's include the philosophy and methods that put an emphasis on these enterprises, despite the fact that there are big differences in the overseas policies in these two countries. Third, German and Japanese governments are embracing the idea that small- and medium-sized enterprises are key to their national economies and implementing policies based on the ratio occupied by these enterprises in the domestic consumption or GDP. In other words, Germany and Japan consider small- and medium-sized enterprises as central to their nation's industry, and assess them as economic industry that should definitely exist for the continued survival of big businesses, and not just as merely supplemental to big business. Fourth, whereas Germany emphasizes support to product exhibition in its overseas expansion support policies, Japan is providing integrated support containing foreign direct investment to small- and medium-sized enterprises. Fifth, there are differences in the overseas expansion support in Germany and Japan in terms of their support to big business. Whereas Germany considers support to big business unnecessary, Japan is implementing active support policies to areas corresponding to big business. Korea will have to benchmark the policies of Germany and Japan, and decide whether or not to give full support to small- and medium-sized enterprises, while excluding areas supporting big business. Conclusions - Based on this analysis of German and Japanese overseas expansion support policies, we need to choose the policies that will engender a solid outcome and derive modified policies for the circumstances of Korea. Additionally, we can use the comparison of the overseas support policies of Japan and Germany to choose small- and medium-sized enterprise overseas expansion support policies for Korea. However, we cannot provide specific overseas support policies by industry. This point will be referenced as a limitation of this study. In future research, we expect that some researchers will take an empirical approach to exploring Korean overseas expansion support through collecting cases of overseas support policies and interviewing policy authorities.

• 한국통신학회논문지
• /
• 제27권6A호
• /
• pp.618-627
• /
• 2002

2차원 이산 웨이블릿 변환(2D-DWT)을 이용한 영상처리에서 영상의 경계부분 화소들을 처리하는 방법은 영상의 화질과 구현비용에 영향을 미친다. 본 논문에서는 하드웨어 및 소프트웨어 구현에 적합하고 화질의 손실이 거의 없는 효과적인 경계화소 처리방법을 제안하였다. 이 방법은 2차원 영상을 1차원 배열로 처리하는 방법으로, DWT 진행방향에 따라 영상을 직렬의 연속적인 데이터구조로 간주하고 DWT를 수행(Serial-Sequential Processing)한다. 제안한 방법의 성능 및 구현의 용이성을 보이기 위하여 영상을 압축하고 복원하는 영상압축 코덱을 구현하여 실험하였다. 여기에는 로그-스케일의 고정 양자화기를 사용하였으며, 엔트로피 코더는 구현하지 않았다. 실험결과 압축률 2:1 이상의 경우(엔트로피 코딩을 제외한 압축율) 주기적 확장(Periodic Expansion, PE)방법과는 거의 동일한 SNR(Signal to Noise Ration)을 보였으며, 대칭적 확장(Symmetric Expansion, SE)방법에 비해서는 15.3%, 0-화소 삽입(Zero-Padding Expansion, ZPE)방법에 비해서는 9.6% 높은 SNR을 보였다. 또한 주기적 확장방법은 본 논문의 방법에 비해 12.99%의 메모리가 더 필요하였으며, 영상의 압축동작만을 고려할 때 제안한 방법에 비해 SE 방법과

• 한국지반신소재학회논문집
• /
• 제17권1호
• /
• pp.75-83
• /
• 2018

본 연구에서는 지반 내 공동에 대하여 긴급복구가 필요한 경우를 대상으로 개발된 포켓형 팽창재료의 거동특성을 분석하고자, 휠트래킹 시험을 통한 동적안정도 및 일축압축강도시험을 이용한 강도특성을 평가하였다. 휠트래킹 시험 결과, 높은 하중조건에서 포켓형 팽창재료로 복구된 지반은 모래지반에 비하여 침하량 증가율이 감소하였다. 즉, 포켓형 팽창재료는 재료의 강성으로 침하억제효과를 나타내는 것으로 확인되었으며, 이는 동적안정도 평가결과에서도 동일하게 나타났다. 휠트래킹 시험 전 후의 일축압축강도시험 결과로부터 공동 긴급복구용 포켓형 팽창재료는 복구된 지반 상부의 하중지지역할이 충분히 가능한 것으로 평가되었다.

• 보건행정학회지
• /
• 제22권3호
• /
• pp.297-314
• /
• 2012

Purpose : The purpose of this study was to analyze the trend of the number of nursing staffs and skill mix and to assess the effectiveness of hospital nurse expansion policies in Korea. Methods : The trend of the number of nursing staffs and skill mix were analyzed using time series data, which composed of yearly series data from 1975 to 2009. The impact of hospital nurse expansion policies was estimated by autoregressive integrated moving average(ARIMA) intervention model. Results : The number of general hospital and hospital nurses per 100 beds was decreased in late 1980s and late 1990s due to rapid growth of beds. As a result of the number of nurse aids per 100 beds decreased, skill mix became high in general hospital but nurse ratio among hospital nursing staffs was about 50%. Expansion of new nurse and revised differentiated inpatient fee were only effective in expansion of hospital nursing staffs. But they had no effect in general hospitals. Conclusion : In Korea, a few policies related to expansion of hospital nurses have an effect on increasing the number of hospital nurse. Nevertheless, level of hospital nursing staffs is inferior to that of general hospital.