• 동력기계공학회지
• /
• 제18권1호
• /
• pp.69-75
• /
• 2014

The pressure and temperature characteristics of mixed refrigerant gases in bulb for thermostatic expansion valve were studied using R22 refrigerant and $N_2$ gases. The characteristics of mixed refrigerant gases were investigated according to pressure variation and the variation of composition ratio of R22 refrigerant and $N_2$ gases in the temperature range of -$15^{\circ}C$~$15^{\circ}C$. The Maximum operating pressure(MOP) of mixed refrigerant gases were showed a tendency to decrease with decreasing the mixing ratio of $N_2$ gas. The characteristics in the case of the mixing ratio of 90:1 for R22 refrigerant and $N_2$ gases were the same result as Reference refrigerant. In addition, the characteristics of the mixed refrigerant gases in the mixing ratio of 90:1 for R22 refrigerant and $N_2$ gases were showed almost linear in the measurement range of pressure-temperature, and the physical properties also were showed similar results with Reference refrigerant. It was able to confirm that a MOP on the thermostatic expansion valve for sensing bulb can be maintained by adjusting the mixing ratio of R22 refrigerant and $N_2$ gases.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.33-38
• /
• 2001

Bifurcation of unstable symmetric flow patterns to stable asymmetric ones in laminar sudden-expansion flow has been numerically investigated. Computations were carried out for an expansion ratio of 3 and over a range of the flow Reynolds numbers by using numerical methods of second-order time accuracy and a fractional-step method that guarantees divergence-free flowfields at all times. The critical Reynolds number above which bifurcation of pitchfork type to asymmetric flow pattern takes place is lower in a flow with a higher expansion ratio, in agreement with the previously reported results. The bifurcation diagrams show that the bifurcation takes place at a Reynolds number, $Re_c = 86.3$, higher than the value that has been reported. The lower critical Reynolds number may be due to deficiencies in their computations which employed SIMPLE-type relaxation methods rather than the initial-value approach of the present study. Characteristics of the flow development during the transition to asymmetric stable flow have been investigated by using spectral analysis of the velocity signals obtained by the simulations.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2000년도 춘계학술대회 논문집(Proceeding of the KOSME 2000 Spring Annual Meeting)
• /
• pp.45-51
• /
• 2000

Investigators who study on combustion in the cylinders of reciprocating piston type internal combustion engines have been encountered embarrassments due to the difficulties of adjusting specific parameter without interfacing other parameters such as cylinder wall temperature composition of gas in the cylinder existence of cylinder lubricant etc. Rapid compression-expansion machine the position and speed of piston of which are able to be controlled by means of a system controlled electrically and speed of piston of which are able to be controlled by means of a system controlled electrically and actuated hydraulically could be utilized as one of the most preferable countermeasures against those difficulties. Several units of rapid compression-expansion machines were developed but the speed up of frequency of piston movement still is the problem to be improved to cope with actual speed of internal combustion engines. Authors designed and manufactured a new rapid compression-expansion machine electrically controlled hydraulically actuated and computer programed and then examined the performance of one. Results of a set of experiments revealed acquirements of certain improvement of frequency of piston movement preserving the stability of system response and reproducing accurate compression ratio of cylinder those are the key function for the in-cylinder combustion experiments of internal combustion engines.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권5호
• /
• pp.69-75
• /
• 2000

Investigators who study on combustion in the cylinders of reciprocating piston type internal combustion engines have been encountered embarrassments due to the difficulties of adjusting specific parameter without interfacing other parameters such as cylinder wall temperature, composition of gas in the cylinder, existence of cylinder lubricant etc. Rapid compression expansion machine, the position and speed of piston of which are able to be controlled by means of a system controlled electrically, and actuated hydraulically could be utilized as one of the most preferable countermeasures against those difficulties. Several units of rapid compression expansion machines were developed but the speed up of frequency of piston movement still is the problem to be improved to copy with actual speed of internal combustion engines. Authors designed and manufactured a new rapid compression-expansion machine electrically controlled, hydraulically actuated, and computer programed and then examined the performance of one. Results of a set of experiments revealed acquirements of certain improvement on frequency of piston movement preserving the stability of system response and reproducing accurate compression ratio of cylinder, those are the key function for the in-cylinder combustion experiments on internal combustion engines.

• 한국환경과학회지
• /
• 제5권1호
• /
• pp.93-102
• /
• 1996

Hydrodynamic characteristics such as gas holdup, liquid circulation velocity and bed expansion in a hexagonal inverse fluidized bed were investigated using air-water system by changing the ratio ($A_d$/$A_r$) of cross-sectional area between the riser and the downcomer, the liquid level($H_1$/H), and the superficial gas velocity($U_g$). The gas holdup and the liquid circulation velocity were steadily increased with the superficial gas velocity increasing, but at high superficial gas velocity, some of gas bubbles were carried over to a downcomer and circulated through the column. When the superficial gas velocity was high, the $A_d$/$A_r$ ratio in the range of 1 to 2.4 did not affect the liquid circulation velocity, but the maximum bed expansion was obtained at $A_d$/$A_r$ ratio of 1.25. The liquid circulation velocity was expressed as a model equation below with variables of the cross-sectional area ratio($A_d$/$A_r$) between riser to downcomer, the liquid level($H_1$/H), the superficial gas velocity($U_g$), the sparser height[(H-$H_s$)/H], and the draft Plate level($H_b$/H). $U_{ld}$ = 11.62U_g^{0.75}$${(\frac{H_1}{H})}^{10.30}$${(\frac{A_d}{A_r})}^{-0.52}$${(\frac({H-H_s}{H})}^{0.91}$${(\frac{H_b}{H})}^{0.13}$

• 한국추진공학회지
• /
• 제19권2호
• /
• pp.38-45
• /
• 2015

본 연구에서는 고고도의 저압환경 구현을 목적으로 사용되는 이젝터의 설계기법을 정립하고 상온가스를 이용한 실험을 통하여 성능변수와 형상변수에 따른 이젝터 작동 특성을 관찰하였다. 유량비, 압축비, 팽창비를 성능변수로 선정하고, 간극비를 형상변수로 선정하여 실험을 수행하였다. 실험결과 이젝터의 성능을 예측할 수 있는 성능변수들의 관계를 파악하였으며, 간극비 보다는 성능변수가 이젝터의 성능에 큰 영항을 미치는 것을 확인하였다.

• 공업화학
• /
• 제28권4호
• /
• pp.437-441
• /
• 2017

본 연구에서는 방화용 실란트의 첨가제로 사용되는 팽창흑연의 부피팽창률과 경도특성을 개선하기 위해 팽창흑연에 다양한 수지를 코팅한 후 그 특성을 고찰하였다. 수지의 코팅률을 나타내는 평균코팅두께는 수지의 건조속도와 점도의 영향으로 초산비닐계수지 > 아크릴수지 > 우레탄수지 > 수용성라텍스의 순으로 크게 나타났다. 또한 수지의 종류에 따라 코팅된 팽창흑연의 부피팽창률은 우레탄수지 > 수용성라텍스 > 아크릴수지 > 초산비닐계수지의 순으로 컸으며, 경도는 초산비닐계수지 > 아크릴수지 > 수용성라텍스 > 우레탄수지의 순으로 증가함을 알 수 있었다. 이는 코팅처리를 하지 않은 팽창흑연에 비해 부피팽창률은 감소하나 경도가 현저하게 증가되어 방화첨가제로 사용이 가능함을 알 수 있었다. 반응표면분석법에 의한 최적화실험 결과 아크릴수지의 최적코팅 조건은 수지의 첨가량 37.6 wt%과 코팅 교반속도 441.4 rpm이었다.

• 한국식품과학회지
• /
• 제35권4호
• /
• pp.617-622
• /
• 2003

두유박 시리얼을 제조하는데 최적 배합비를 산출하기 위하여 혼합물 실험 계획법을 사용하였다. 두유박 $30{\sim}80%$과 옥분 $20{\sim}70%$의 제약조건으로 실험디자인을 하여 압출성형을 한 결과, 두유박 함량이 증가할수록 시리얼의 팽화율은 작아지고 용적 밀도는 높아진 반면에 옥분의 함량이 증가할수록 팽화율과 절단강도, 수분용해지수, 수분흡수지수를 증가시켰다. 시리얼의 색도에서는 두유박을 첨가할수록 어두워지고, 옥분은 $L^*$값과 $b^*$값에 큰 영향을 주었다. 모델화 및 분석을 통한 반응 결과는 팽화율, 절단강도, 수분흡착지수는 quadratic 모델이 설정되고, 용적밀도, 수분용해지수, 색도는 linear 모델이 설정되었다. 색도의 $a^*$을 제외한 모든 반응결과에서 5% 이내의 유의차를 보여주어 모델에 대한 적합성을 입증하였고, 예측된 반응식을 통하여 혼합물내의 성분들이 시리얼에 미치는 영향을 살펴볼 수 있었다. 결과적으로 각 반응의 모델에서 나타난 계수를 이용한 수치 최적화를 하였을 때, 두유박 46.19%, 옥분 53.81%의 최적 배합비가 산출되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.255-260
• /
• 1998

As a part of the study on the development of augered pile method, this study is intended to investigate the properties of fresh and hardened mortar with the proportion of expansion additives. With the increase of proportion of expansion additives, the fluidity of mortar shows a decrease while air content increases and setting time gets retarded. It show the satisfactory property in strength at 5% of proportion, and shows more expansion with the increase of proportion of expansion additives and sand/cement ratio. In conclusion, both of strength and expansion reveal appropriate at 10% of proportion of expansion additives.

• 통상정보연구
• /
• 제11권1호
• /
• pp.139-155
• /
• 2009

This study investigates empirically the export competitiveness of Korea and Japan in America by calculating 4 indexes such as market share index(MSI), export similarity index(ESI), market comparative adventage index(MCAI) and market share expansion ratio(MSER)-export similarity deepening ratio(ESDR). The empirical finding of this analysis shows that Korea is competitive in the labor-intensive products and Japan in the technology-intensive products. This result also meets the general understandings that Japan is superior to Korea in the export competitiveness such as value added of goods, etc. Therefore, in order to strengthen the export competitiveness of Korea in the US market, it's desirable for our firms and government to improve the quality of product ranges by developing technologies focused on the higher value-added products.