• Journal of the Korea Institute of Building Construction
• /
• v.15 no.4
• /
• pp.359-365
• /
• 2015

Floor mortar experiences dry shrinkage by temperature and humidity difference of internal matrix with material type. Also, since floor mortar is influenced by environmental conditions during placing and curing period, cracks are likely to be occurred. In this study, it was evaluated the hardening and dry shrinkage properties of non-sintered binder based floor mortar utilizing alpha-hemihydrate gypsum which has expansibility in order to prevent crack of the floor mortar. It was applied to the construction site, and examined the effects of external environmental conditions on shrinkage deformation and cracking. Different types of slag accelerated initial and final setting in comparison with cement mortar and its compressive strength was satisfied standard compressive strength for floor mortar. Also shrinkage deformation behavior after the initial expansion exhibited a similar tendency with the cement mortar. From the field application result, no crack was found from slag mortar, and it is determined that the slag mortar has better dimensional stability than cement mortar caused by external environment conditions.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.5
• /
• pp.123-134
• /
• 2009

Since 1970s, urethane waterproofing method is broadly used in rooftops, underground spaces, and sports stadium for its outstanding ultraviolet blockage, watertightness, and elasticity. However, development of slippage-resistance and endurance, improvement of function considering convenience and visually pleasing of users, urethane waterproofing method is necessary, since rooftops and underground spaces have slippage and external force risks. Therefore, many improved waterproofing methods are being developed and, recently, embo-thane waterproofing method, which applies embo-spray coating system, has been developed. This paper explains exposure, nonexposure, and floor-material of embo-thane waterproofing method, and then perform experimental study for comparison with urethane waterproofing method about tensile strength, coefficient of expansion, performance of bond, anti-abrasion, and slippage-resistance. In addition, the performance index was presented for the superiority of embo-thane waterproofing method compared to urethane by setting up evaluation criteria considering not only physical performance but also design side of embo-thane waterproofing method, and Value Analysis applying AHP. Also for an assessment considering uncertain result, Monte Carlo Simulation Method was used to operate reliability analysis through statistic approach method.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.38 no.2
• /
• pp.125-131
• /
• 2020

In this study, the author comparatively analyzed the effects and applicability of drifts, one of planting design methods based on the principle of visual harmony, to look into the definition and characteristics in planing techniques with examples of drifts in gardens designed by Gerturde Jekyll and Piet Oudolf. Sites chosen for the case studies included Jekyll's Upton grey and Hestercomb garden and Oudolf's At Scampston Hall and Trentham Estate Garden. The results showed that Jekyll set layers for vertical and horizontal structures by using plants of different height to make flowers look like floating with their stems unseen and appear in turn over time. Assemble planting of groups was used to conceal rigid, irregular lines so that the plants are recognized as mass with smoother horizontal lines. Clearly visible, repeated drifts creates a sense of unity. Oudolf, in combining grass and perennial plants, used one-to-one correspondence or expansion to express drifts. Grass serves roles as a connecting material inserted when changing space or making transitions of images. Blocks in single species are repeatedly crossed to set scenes, and overlapping and mixing makes them more lively.

• Archives of design research
• /
• v.18 no.3 s.61
• /
• pp.55-62
• /
• 2005

Recently, the opening of the world economy and regional ization of national demand endless endeavors and investments to upbring design-industry for regional economic development. Our domestic commodities, declined in price competitiveness against China and Southeast Asian nations, need construction of brand image of commodities and consumers' response through expanded concernments in marketing spheres. The design-industry is a important means to strengthen competitiveness of the domestic industry through discrimination of commodities and creativity of high added value. Design-industry has some problems in circumstances; commodity development and marketing are below the level in the sphere of manufacture industry yet and businessmen are unwilling to invest demanded for development of new design. Establishment of the personal foundation, useful for accumulating competent designers' experiences and technologies, can not pass limit. In addition, a system and a policy to protect design-industry have a problem in effectiveness. Concrete strategies to activate design industry which meets social and cultural circumstances of Daegu and Gyeongbuk region are to establish policy for construction of specialists' infra, systematization of study & development of design, common ownership of information on design, and expansion of design company. The business to upbring design in the region should be operated to develop competitive commodities which is helpful to the regional economy and to increase value of the regional enterprises' brand. In addition, foundation of design should be expanded personal, material, and informational infra through design-centered so that they are helpful to activate economy of Daegu and Gyeongbuk through making design reformational cluster.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.1040-1046
• /
• 2010

The main disadvantage of rapid setting concrete is the occurrence of cracking because of fast hydration reaction due to high thermal expansion and shrinkage. However, if the fly ash is used in concrete, it is possible to prevent cracking since the hydration heat can be decreased. Although Very-Early Strength-Latex Modified Concrete(VES-LMC) is an excellent material, occurrence of cracking has been reported because of high hydration heat. In the present study, new method which can apply the fly ash to the VES-LMC was developed. Research for the new method to improve the safety for the cracking was conducted. Safety was confirmed by reducing the shrinkage and hydration heat in the condition of overcoming the low early-age strength. Detailed conclusions are follows. Early-age compressive strength was decreased a little with increase of UFFA content. However, 28-d compressive strength was statistically insignificant regardless of UFFA contents. If the UFFA is replaced 15% to 20% of unit cement weight in concrete, maximum shrinkage can be reduced up to 43% to 47%. Usage of UFFA in VES-LMC guarantees the safety for cracking since it is very effective to control of early-age shrinkage.

• Journal of Chest Surgery
• /
• v.40 no.9
• /
• pp.613-616
• /
• 2007

Background: Spontaneous hemopneumothorax is a rare disease and can be life threatening; it occurs in $1{\sim}12%$ of patients with spontaneous pneumothorax. We analyzed clinical reviews and treatments, as well as complications of spontaneous hemopneumothorax patients that were treated to aid in the optimal management. Material and Method: We studied retrospectively 30 cases with spontaneous hemopneumothorax for 11 years, from 1995 to 2006, at our hospital. Result: All the patients were male and most of the patients were under 30 years. The sides with the disorder were as follows: right in 15 cases and left in 15 cases. Patients showed mostly initial symptoms of chest pain, dyspnea and hypovolemic shock. All patients underwent a closed thoracostomy and 27 patients underwent surgery. Chemical pleurodesis was peformed because of postoperative persistent air leakage and one case was treated in the ICU due to re-expansion pulmonary edema, There were no other complications such as fibrothorax seen during the follow-up periods. Conclusion: The most important finding is proper initial management, as the spontaneous hemopneumothorax can potentially lead to a life-threatening condition. Recently, video assisted thoracoscopic surgery (VATS) is common procedure for general thoracic surgery and overcomes the weak points of performing a thoracotomy. The results of VATS are encouraging.

• Journal of Biomedical Engineering Research
• /
• v.24 no.6 s.81
• /
• pp.515-522
• /
• 2003

Pharynx is a system transporting foods by peristaltic motion(contraction and expansion movement! into the esophagus and functioning as airway passages. In this study, structural changes of pharyngeal dysfunction are analyzed by biomechanical model using CT and FEM(finite clement method). Loading condition was assumed that equal pressure was loaded sequentially to inside of pharyngeal tissue. In order to analyze the pharyngeal muscular dysfunction by biomechanical model. the pharyngeal dysfunctions was classified into 3 cases. Taking into account the clinical complication by neuromuscular symptoms such as pharyngeal dysfunction after stroke. we assumed that a change of material property is caused by muscular tissue stiffness. A deformation of cross sectional area of the pharynx is analyzed increasing the stiffness $25\%,\;50\%,\;75\%$ in each case on the basis of stress-strain relationship. Based on three-dimensional reconstruction of pharyngeal structure using limited factor - techniques and the optimization procedure by means of inverse dynamic approach. the biomechanical model of the human pharynx is implemented. The results may be used as clinical index illustrating the degree of pharyngeal muscular dysfunction. This study may be used as useful diagnostic model in discovering early deglutitory impediment caused by physiological or pathological pharyngeal dysfunction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4635-4642
• /
• 2010

Latex modification of concrete provides the material with higher flexural strength, as well as high bond strength and reduced water permeability. One of the most advantages of the very early-strength latex-modified concrete (VES-LMC) could be the similar contraction and expansion behaviour to normal concrete substrate, which enable to ensure long-term performance. The purpose of this study was to parametric nonlinear flexural nonlinear analysis of RC beam rehabilitated by VES-LMC. The results were as follows; The flexural nonlinear analysis model of RC beam overlaid by VES-LMC in ABAQUS was proposed to predict the load-deflection response, interfacial stress, and ultimate strength. The proposed FE analysis model was verified by comparison of an experimental data and the FE analysis results. The FE analysis results showed that yield point as well as flexural stiffness increased as the depth increased; the stiffness of beam overall increased as the bond stiffness became larger; the bond strength between two different materials is a key factor in composite beam. A parametric study showed that an overlay thickness was a main influencing factor to the behavior of RC beam overlaid by VES-LMC.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.4
• /
• pp.79-85
• /
• 2019

'Experiments in Art and Technology' Group was established in the mid-20th century, and then developed the larger interdisciplinary experiments into the range of art world and its outside field. The motive power of group's activities was the collaboration between artists and engineers traversing the boundary between old different disciplinary conventions. E.A.T was officially launched in 1967 by the engineers Billy $Kl{\ddot{u}}ver$ and Fred Waldhauer and the artists Robert Raushenberg and Robert Whitman. They performed various possibility of material, technology, and engineering available to contemporary art. By reflecting the function of art and technology in society, eventually they developed the methodology of new aesthetics which had organic relationship with contemporary world. In this sense, this research have its academic significance. This paper firstly examined the socio-cultural context of emerging the E.A.T. group as a representative model for convergent practice, and verified the fact that the collaboration between artists and engineers had produced the expansion of artistic expression as well as new relationship among art, engineering, and society by considering E.A.T's various projects. Therefore, I will refer the E.A.T. group as an exemplary model for concrete method of collaboration that contemporary discourses about convergence need.

• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.4
• /
• pp.262-270
• /
• 2021

Consumption of Liquefied Natural Gas (LNG) has increased due to environmental pollution; therefore, the need for LNG carriers can efficiently transport large quantities of LNG, is increased. In various types of LNG Cargo Containment System (CCS), Membrane-type MARK-III composed of composite materials is generally employed in the construction of an LNG carrier. Among composite materials in a Mark-III system, glass-fiber composites act as a secondary barrier to prevent the inner hull structure from leakage of LNG when the primary barrier is damaged. Nevertheless, several cases of damage to the secondary barriers have been reported and if damage occurs, LNG can flow into the inner hull structure, causing a brittle fracture. To prevent those problems, this study conducted the applicability assessment of composite material manufactured by bonding glass-fiber and aluminum with epoxy resin and increasing layer from three-ply (triplex) to five-ply (pentaplex). Tensile tests were performed in five temperature points (25, -20, -70, -120, and -170℃) considering temperature gradient in CCS. Scanning Electron Microscopy (SEM) and Coefficient of Thermal Expansion (CTE) analyses were carried out to evaluate the microstructure and thermos-mechanical properties of the pentaplex. The results showed epoxy resin and increasing layer number contributed to improving the mechanical properties over the whole temperature range.