• 한국가정과학회지
• /
• 제7권3호
• /
• pp.15-33
• /
• 2004

A precise understanding of the human form in static pose serves as the basis of designing clothing. When the human body is in motion, however, even an article of clothing designed to fit the human form in static pose can pull and change, thus restricting the body. In order to increase the fit of the clothing, which may be termed the second skin, its form and measurements therefore must be determined in correlation not only with the formal characteristics of the human body, in static pose but also with its functional characteristics in motion, as caused by the movements of the human body. In this study, the motion factor was selected as the primary basis for designing slacks with good fit in both static and moving states. By indentifying the areas in which lower limb movement cause significant changes in body surface lines, we suggest several application methods for designing slacks. Using unmarried female university students aged 18 - 24 as subjects, a total of 32 body surface categories (15 body surface lines and 17 body surface segment lines) were measured in one static and 9 movement poses. In particular, expansion and contraction levels and rates were measured and used in the analysis. The analysis first involved the calculation of the average measurement per body part in body surface line in static pose as well as of the average expansion and contraction levels and rates in 9 lower limb movements. Two-way MANOVA and multiple comparison analysis (Tukey) were conducted on movements and individual somatotypes regarding measurement per body part and expansion and contraction rates. Body parts whose measurements of body surface lines differed significantly in body surface line in static pose versus in movement were then identified. The results of this study are as follows. First, changes in body surface lines caused by lower limb movements were significant in all body surface lines of the lower trunk, both horizontal and vertical, with the exception of abdomen girth, midway thigh girth, ankle girth, hip length, and posterior knee girth. Second, significantly expanded 10 body surface lines in moving pose were detected and illustrated in table 4. These body parts should be studied in designing or pattern designing, especially for close-fitting pants, in using stretch fabric, and in sensory evaluation of good fit during movement.

• 한국압력기기공학회 논문집
• /
• 제10권1호
• /
• pp.7-14
• /
• 2014

There has been extensive experience associated with the operation of SGs wherein it was believed, based on NDE, that throughwall tube indications were present within the tubesheet. The installation of the SG tubes usually involves the development of a short interference fit, referred to as the tack expansion, at the bottom of the tubesheet. The tack expansion was usually effected by a hard rolling process and thereafter, in most instance, by the expansion of a urethane plug inserted into the tube end and compressed in the axial direction. The rolling process by its very nature is considered to be intensive with regard to metalworking at the inside surface of the tube and would be expected to lead to higher residual surface stresses. Alternate repair criteria(ARC) in the tack expansion area have been developed and applied to nuclear power plants in USA, however domestic nuclear power plants have not applied ARC for tubes in tubeheet area yet. In consideration of the degradation characteristics of tubes in the Steam Generator tubesheet, this paper suggests ARC application for tubes in the steam generator tubesheet of the domestic nuclear power plants in order to assure life time of the steam generator as well as nuclear power plants.

• 복식
• /
• 제58권2호
• /
• pp.162-180
• /
• 2008

The purpose of this study is to find the basic design factors that affect the changes in body surface lines caused by lower limb movements, thereby resulting in slacks that fit well regardless of whether the human form is static or in motion. Using unmarried female university students aged 18-24 as subjects, a total of 32 body surface lines (15 body surface total lines and 17 body surface segment lines) were measured in one static and 9 movement poses, The analysis first involved the calculation of the expansion and contraction rates per body part in body surface line in 9 lower limb movements, Second, a factor analysis was conducted using the expansion and contraction rates of these changes in body surface line. The results of this study are as follows, According to the factor analysis, basic design factors that affect changes in body surface lines comprised 8 types of factors as illustrated in fig, 2-fig, 9, which explained 79.2% of total variate for the variables studied, Factor 1, comprising the lower segment of center back leg line, center front leg line and inner leg line, and lower limb girth except midway thigh girth and ankle girth below hip girth, accounted for 30.3% of total variance, Factor 2, comprising waist girth, the total and upper segment of center back leg line and center tront leg line, and front and back segment of crotch length, explained 17.4% of total variance, Factor 3, the total and upper segment of lateral leg line at the center, accounted for 56.5% of total variance in accordance with Factors 1, 2, and 3, Factor 4 was the contracting upper part of lower leg between legscye girth and midway thigh girth, Factor 5 comprised the total and upper segment of inner leg line and posterior knee girth, Factor 6 was the total crotch length, Factor 7 was the ankle girth, Factor 8 was the abdomen girth.

• 한국건설관리학회논문집
• /
• 제11권1호
• /
• pp.113-121
• /
• 2010

정부의 신 재생에너지 분야 투자확대정책과는 달리 08년 발전차액지원 기준가격이 인하된 이후 태양광사업의 추진 건수가 대폭 감소되는 양상을 보이고 있다. 이는 전세계적 금융위기에 따른 재원조달의 어려움이 근본적 원인이기도 하지만, 현행 발전 차액지원 기준가격체계가 적정하지 못한데도 그 원인을 찾을 수 있다. 본 연구에서는 입지와 형식별로 여러 대안을 설정하고, 비용 및 수익의 변동 리스크를 반영하는 기준가격 산정모델(Cost & Benefit Risk Based Purchase Price Process Model : CBRP3 Model)을 제안한다. 발전설비 대안별로 투자비와 발전량의 변동데이터를 산출하여 재무템플릿에 입력한 후 시뮬레이션을 실행하여 대안별 발전원가의 확률분포를 도출하고, 이를 기반으로 기준가격체계를 도출한다. 도출된 기준가격체계와 현행 발전차액지원 기준가격체계를 비교하고, 향후 연구과제를 제시한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.57-59
• /
• 2003

Shrink fitting is often used to constrain a conventional mechanical fasteners and fastening methods with temperature difference. Localized heating of the mating surface provides temporary expansion and allows slip fit assembly. The resulting interference fit exhibits exceptional strength without surface deformation at ambient temperatures. We studied an analysing method to find out a deformation of motor axis as variation of constrained method with shrink fitting.

• Journal of Biosystems Engineering
• /
• 제19권2호
• /
• pp.138-147
• /
• 1994

The stress relaxation and creep characteristics of fruits have usually been fit to an exponential expression based on a generalized Maxwell model and Burger's model. It is known that two to three terms in the expansion of those models are necessary to obtain a satisfactory fit to the rheological characteristics of fruits. Since four to six constants appear in the models, it is very difficult to determine their physical meaning according to the experimental conditions and levels. Therefore in order to ease the comparison of data, this study was conducted to develop the linearized rheological model of the fruit from the previous studies of stress relaxation and creep characteristics of fruits. Stress relaxation and creep characteristics were able to normalize and presented in the linear form of $t/S(t)=K_1+k_2t$ and $t/C(t)={K_1}^{\prime}+{K_2}^{\prime}t$, respectively. It was possible to compare the effects of experimental conditions and levels much easier from the linearized models developed in this study than from the generalized Maxwell model and Burger's model.

• Journal of electromagnetic engineering and science
• /
• 제7권1호
• /
• pp.7-11
• /
• 2007

PCB Power-Bus (comprising power/ground planes) impedance and fields are evaluated by an efficient series expansion method that is suggested in this paper. It is used to investigate the structure's radiated emission(RE) levels and find acceptable ways of loading the power/ground planes such as decoupling capcitor(DeCap)s, balanced feeding and slits, in order to reduce the interferences. Also, the calculations and measurements of a proposed geometry are verified by vector fitting as a analysis model to check the behavior of the slit.

• 대한기계학회논문집A
• /
• 제20권10호
• /
• pp.3152-3159
• /
• 1996

Previous works about the cylindrical shape elastic body which is under longitudinal temperature distribution mostly show the results of free expansion, therefore exact thermo-elastic analysis is needed. The object of this work is to analyze the thermo-elastic problem of the hollow cylinder when the cylinder is under longitudinal temperature distribution. In this paper, the analytical solution is found by using Galerkin vector, and it is compared by the results of FEM. For displacements of cylinder, analytical values are almost same as the results of FEM, but free expansion is not fit for analytical solution and the results of FEM. stresses from analytical solution and the results of FEM show good agreement also. but the results are different near the end boundary, since St. Venant principle is applied.

• 한국음향학회지
• /
• 제21권8호
• /
• pp.679-685
• /
• 2002

천해에서의 저주파 단상태 잔향음 모델 (L-HYREV: Low-frequency Hanyang univ. Reverberation model)을 개발하였다. 음선이론 (ray-theory)에 기초한 전파모델은 해저 내로 투과되는 음파에 대한 효과를 적절하게 고려할 수 없으므로, 해저 내 상호작용을 계산할 수 있는 전파모델이 필요하다. 따라서 본 논문에서는 RAM(Range dependent Acoustic Model)을 이용해서 전달손실을 계산 후, 다중경로 확장모델 (multi-path expansion model)을 이용해서 산출한 전달손실을 보정하였다. 모델의 검증을 위하여 GSM (generic sonar model) 잔향음 모의 신호 및 실측 잔향음 신호와 비교하였으며, 비교 결과 GSM보다 L-HYREV 모델이 저주파 잔향음 예측에 적합함을 확인할 수 있다.

• 한국지역사회생활과학회지
• /
• 제28권3호
• /
• pp.365-375
• /
• 2017

The purpose of this study was to investigate the maximal elongation rate and area expansion ratio of human skin in various postures. Five males and five females (male: $23{\pm}2yr$ in age, $177.9{\pm}4.8cm$ in height, $76.7{\pm}8.8kg$ in body weight, $24.2{\pm}2.5$ in BMI, $16.2{\pm}3.4%$ in body fat; female: $22{\pm}1yr$, $163.2{\pm}3.6cm$, $51.4{\pm}2.7kg$, $19.3{\pm}1.6$, $27.4{\pm}6.7%BF$) participated in this study. Measurements were conducted using a pen and tape on the elbow, knee, wrist, shoulder, and neck. Subjects held postures so that each joint of the body regions was bent at its maximal level. The results were as follows: 1) The maximal elongation rate of skin showed a significant difference among the regions: $16.6{\pm}3.4%$ for the wrist, $22.4{\pm}5.5%$ for the neck (back), $37.6{\pm}11.3%$ for the shoulder, $42.6{\pm}10.0%$ for the knee, and $43.9{\pm}4.0%$ for the elbow (p<0.05). 2) The maximal expansion rate of the body surface area had the greatest values on the elbow ($93.7{\pm}6.4%$) and knee ($74.8{\pm}10.8%$). 3) No significant difference was found between males and females. In summary, maximal values of skin elongation and expansion rates in vivo were greater than in vitro values known from previous reports. These results can be applied to develop electronic fibers or textiles for wearable tight fit work clothing as well as fitness wear.