• Tribology and Lubricants
• /
• v.32 no.5
• /
• pp.166-171
• /
• 2016

Electric vehicle ownership is expanding for two reasons: its technology features have enhanced fuel economy, and the number of vehicle emissions regulations is increasing. Battery performance has a large influence on the capability of electric vehicles, and even though battery thermal management has been actively researched, specific technological improvements to battery performance are not being presented. For instance, many industrial applications utilize vortex tubes as components for refrigeration machines because of their numerous intrinsic benefits. If electric vehicles incorporate vortex tubes for battery cooling, performance and efficiency advancements are possible. This study uses a counter-flow vortex tube to investigate its temperature separation characteristics, based on the back pressure of the cold air exit and the difference between the inlet and back pressures. The experiment uses a vortex tube with the following parameters: six nozzle holes, a 20 mm inner vortex diameter (D), a 14D tube length, a 0.7D cold exit orifice diameter, and a nozzle area ratio of 0.142. The measurements prove that the temperature difference between the hot air and cold air decreased because of the flow resistance of the hot air and the backflow phenomenon at the cold air exit. The flow resistance causes the temperature difference to decrease, and the back pressure of the cold air exit influences the flow resistance. The results show that the back pressure significantly influences the efficiency of temperature separation.

• Journal of The Korean Astronomical Society
• /
• v.47 no.5
• /
• pp.179-185
• /
• 2014

We study the physical and chemical properties of the molecular clump hosting a young stellar cluster, IRAS 20160+3636, which is believed to have formed via the "collect and collapse" process. Physical parameters of the UC H II region associated with the embedded cluster are measured from the radio continuum observations. This source is found to be a typical Galactic UC H II region, with a B0.5 type exciting star, if it is ionized by a single star. We derive a CN/HCN abundance ratio larger than 1 over this region, which may suggest that this clump is being affected by the UV radiation from the H II region.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.26 no.1
• /
• pp.51-62
• /
• 2020

Purpose: The Intensive Care Unit (ICU) is an important inpatient care area where critical patients are treated intensively with advanced medical technology. The level of care of ICU and the modernization of related facilities is an important indicator of health care quality. At the present time, when the Regional public hospitals are frequently expanding, the rational planning of the ICU has become an important part of the medical institutions treating the ICU. The purpose of this study is to present basic data with net area which can be used in the architectural planning of the ICU. Methods: The investigation and analysis of the ICUs were conducted on 26 medical facilities, based on theoretical analysis through relevant guidelines, articles, and documents, and on the basis of the actual space composition and net area analysis through the architectural drawings. Results: This study provides basic data such as zone division, spatial composition, relationship between main activities and zones, composition of facilities in the zone and area ratio within each zone. Implications: The results of this paper are expected to be effective reference materials for future research for rational spatial organization and efficient operation of the Intensive Care Unit in regional public hospitals.

• Korean Journal of Optics and Photonics
• /
• v.4 no.3
• /
• pp.309-316
• /
• 1993

We find the vectorial solution of the optical waveguide with semicircular cross-section by expanding the electromagnetic fields of the waveguide into the series of trigonometric and Bessel funtions and by applying the boundary conditions at the finitely selected points on the interface of the core and the cladding. We find also the propagation constants and the energy distributions of the eigenmodes and discuss its properties. As a result of computation, we find that the electromagnetic fields of the even modes about the symmetric axis of the semircular shape are nearly the same as those of the odd modes except that E and H of the odd modes are replaced by -H and E and that the even and odd modes are degenerated as the ratio of refractive index of the core and cladding approaches to 1.

• Composites Research
• /
• v.35 no.3
• /
• pp.121-126
• /
• 2022

Owing to advantages of polymeric materials for hydrogen tank liner like light-weight property and high specific strength, polymer based composites have gained much attention. Despite of many benefits, polymeric materials for fuel cell tank cause problems which is critical to applications as low gas barrier property, and poor processability when adding fillers. For these reasons, improving gas barrier property of polymer composites is required to study for expanding application fields. This work presents impermeable polymer nanocomposites by introducing thin barrier coating using layer by layer (LBL) deposition method. Also, bi-layered and quad-layered nanocomposites were fabricated and compared for identifying relationship between deposition step and gas barrier property. Reduction in gas permeability was observed without interrupting mechanical property and processability. It is discussed that proper coating conditions were suggested when different coating materials and deposition steps were applied. We investigated morphology, gas barrier property and mechanical properties of fabricated nanocomposites by FE-SEM, Oxygen permeation analyzer, UTM, respectively. In addition, we revealed the mechanism of barrier performance of LBL coating using materials which have high aspect ratio.

• Communications for Statistical Applications and Methods
• /
• v.29 no.5
• /
• pp.547-559
• /
• 2022

For a chi-squared test, which is a statistical method used to test the independence of a contingency table of two factors, the expected frequency of each cell must be greater than 5. The percentage of cells with an expected frequency below 5 must be less than 20% of all cells. However, there are many cases in which the regional expected frequency is below 5 in general small area studies. Even in large-scale surveys, it is difficult to forecast the expected frequency to be greater than 5 when there is small area estimation with subgroup analysis. Another statistical method to test independence is to use the Bayes factor, but since there is a high ratio of data dependency due to the nature of the Bayesian approach, the low expected frequency tends to decrease the precision of the test results. To overcome these limitations, we will borrow information from areas with similar characteristics and pool the data statistically to propose a pooled Bayes test of independence in target areas. Jo et al. (2021) suggested hierarchical Bayesian pooling models for small area estimation of categorical data, and we will introduce the pooled Bayes factors calculated by expanding their restricted pooling model. We applied the pooled Bayes factors using bone mineral density and body mass index data from the Third National Health and Nutrition Examination Survey conducted in the United States and compared them with chi-squared tests often used in tests of independence.

• The Journal of Korean Medicine
• /
• v.44 no.3
• /
• pp.163-169
• /
• 2023

Objectives: This study aimed to review the experimental research trends in asthma caused by particulate matter to conduct further researches, especially in clinical trials. Methods: We searched for the meaningful literature using medicinal herb for asthma through the Pubmed databases. Results: Finally, six studies were finally selected. These studies showed recent trends, from 2018 to 2021 and conducted mostly in South Korea. The type of fine dust and the method of inducing asthma are different for each paper, but the effective mechanism is relatively common. It was commonly confirmed that the ratio and number of eosinophils, th2 cells and related cytokines are decreased in BALF and lung tissue by administration of medicinal herb. Conclusions: Although the method of inducing asthma using fine dust has not yet been standardized, it is thought that more meaningful evaluation results can be derived if a standardized animal model is established in the future. Nevertheless, based on the results that herbal medicine is effective for particular matter induced asthma, it is expected that it will be the basis for expanding into future clinical studies.

• Journal of Positioning, Navigation, and Timing
• /
• v.13 no.3
• /
• pp.245-256
• /
• 2024

Following the introduction of civilian navigation, the commercial Global Navigation Satellite System (GNSS) receivers' market has been expanding in various fields such as autonomous driving and smart cities. With improved receiver performance and widespread use of GNSS, the configurations of base and rover receivers are becoming more complex. As a result, user must consider combinations of base stations with different qualities, costs, and performances. To address these issues, we conducted zero-baseline tests to analyze the double-differenced code-pseudorange noise of various receiver combinations, ranging from low- to high-cost. The results showed that the noise varied depending on the receiver combination. Notably, receivers from the same manufacturer exhibited similar noise and positioning errors despite significant price differences. We also found that the double-differenced noise of all receiver combinations was correlated with the Carrier-to-Noise Density Ratio (C/N0), the satellite elevation angle, and the Doppler shift, and it did not perfectly follow a normal distribution. Further analysis based on Modified Allan Deviation (MDEV) showed that different types of noise were observed for each receiver combination and the double-differenced noise and positioning errors have similar statistical characteristics. From this study, the importance of receiver combinations and their various characteristics can be better understood.

• Journal of the Korea Concrete Institute
• /
• v.20 no.1
• /
• pp.89-97
• /
• 2008

By replacing the meta-kaolin with cement and the waste tire chip with fine aggregate separately, the high strength concrete is protected from the spalling in fire and the method to constrain the temperature increase of steel bar within the concrete and the basic properties of the high strength concrete mixed with the material are reviewed. As the result, meta-kaolin increases the self fire proof characteristics of the concrete, the waste tire chip can share the internal expanding pressure so it can be deleted. In detail, using the meta-kaolin about the cement in 4$\sim$8% of weight ratio about the cement and the waste tire chip under the grade scope of 0.6$\sim$3 mm in 5$\sim$10% of weight ratio about the sand is very effective to prevent the spalling.

• Korean Journal of Agricultural Science
• /
• v.46 no.4
• /
• pp.813-825
• /
• 2019

This paper investigated the effects of a government production and shipment stabilization policy and the improvement plan for vegetables in Korea. In this study, a simulation focused on the changes in farm income for Chinese cabbages & radishes using scenarios. The result shows an increase in farm income according to the government policy. In the short-term, demand and supply are fixed, and the policy effect is positive due to the price support effect of the project. However, for mid- to long-term, the price decreases due to the expansion of supply by business beneficiaries, which is likely to be adversely affected by an unstable supply and demand. This increases the burden of government and local government subsidies. This phenomenon is expected to be amplified as the ratio of production and shipbuilding stabilization programs and items expand. When expanding items and adjusting and setting the percentage of participation in the project, it is desirable to set and operate the appropriate business ratio taking into consideration the demand. To improve the effectiveness of the policy, the following remedies were suggested. First, national supply and demand guidelines should be set up, and the autonomous supply and demand control of the producers should be guided by the different preservation according to the implementation of the supply and demand control obligation. As for detailed equipment, it is necessary to establish the reproduction price for each item, set the base price for each wholesale market, increase the incentive for the producers to participate, and fund a business budget to secure business stability.