• Polymer(Korea)
• /
• v.33 no.4
• /
• pp.284-289
• /
• 2009

The morphology and mechanical properties of epoxy/polyamide/MPD reactive blends with various amount of polyamide were investigated. The cure behaviors, mechanical strengths, and morphological changes of the epoxy blend systems were analyzed by using DSC, UTM, and SEM, respectively. The amount of high soluble polyamide in epoxy ranged from 0 to 30 phr, and the cure reaction occurred at $170^{\circ}$ for 30 min. The start and maximum exothermic temperature in heat flows during cure reactions appeared at almost same temperature, indicating that soluble polyamide could rarely hinder the cure reactions. From the SEM images, it was found that the size of separated-phase was very fine about 100-300 nm, and at 20 phr of polyamide the boundary of separated-phase was unclear and the phase revealed co-continuous. By AP plasma treatment of specimen surface, the adhesion strength was increased by 20% due to enhanced surface free energy. By blending 20 phr of polyamide with epoxy, the adhesion strength was increased by 50% due to co-continuous phase in morphology. By considering the surface treatment of specimen and morphological tuning of the blends, it can be expected that the improvement in toughness and excellent adhesion strength can be achieved in structural adhesive systems.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.4
• /
• pp.213-217
• /
• 1999

The electrochemical characteristics of two distinct adsorption sites of H at the polycrystalline Pt/0.2 M LiOH aqueous electrolyte interface have been studied using the phase-shift method. At the forward and backward scans, the under-potentially deposited H (WD H) peak occurs on the cyclic voltammogram. The transition region on the phase-shift profile or the Langmuir adsorption isotherm occurs at ca. -0.66 to -0.96 V vs. SCE. At the transition region (ca. -0.66 to -0.96 V vs. SCE), the equilibrium constant (K) for H adsorption transits from 18.5 to $4.0\times10^{-5}$ and vice versa. Similarly, the standard free energy $({\Delta}G_{ads})$ of H adsorption transits from -7.2 to 25.1kJ/mol and vice versa. The under and over-potentially deposited H (UPD H and OPD H) on the poly-Pt surface act as two distinguishable electroadsorbed H species. An exothermic reaction occurs at the UPD H range. Both the UPD H peak and the transition region are attributed to the two distinct adsorption sites of the UPD H and OPD H on the poly-Pt surface.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.6
• /
• pp.1127-1137
• /
• 2000

Applications of lanthanum ion and crude rare earth chloride to the phosphate wastewater and fluorine wastewater, respectively, as treatment agents were studied. For the investigation of phosphate removal characteristics according to the amount of lanthanum ion, initial phosphate content was decreased by about 50% when molar ratio of [$La^{3+}$]:[$PO_4{^{3-}}-P$] was 0.25 and nearly all of phosphate was removed when the molar ratio of [$La^{3+}$]:[$PO_4{^{3-}}-P$] to be doubled. The removal of phosphate by $La^{3+}$ appeared to reach equilibrium state rapidly, and it was exothermic reaction since the removed amount of phosphate was diminished somewhat when the reaction temperature was increased. The zeta potential of combined particulate compound of lanthanum ion and phosphate was located for its isoelectric point at pH 5.5 and the turbidity of treated wastewater was found to vary according to the pH in a similar manner as the absolute value of zeta potential of the combined particulate compound did. For the treatment of fluorine wastewater by crude rare earth chloride, the remaining fluorine content after treatment decreased as the dosage of crude rare earth chloride increased. Whereas, the turbidity of treated wastewater and the amount of sludge generated were shown to increase as more crude rare earth chloride was added. The remaining fluorine content and the turbidity of treated wastewater were decreased and the amount of sludge generated was observed to increase according the increase of coagulant dosage under the condition of constant input of crude rare earth chloride.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.10
• /
• pp.756-762
• /
• 2013

The economical feasibility was conducted to find the adequate method to treat the dredged sediments from agricultural reservoirs in a pilot project that had been operated to improve the quality of water and benthic environments by dredging of contaminated sediments. For benefit/cost (B/C) analysis, the net expenses were considered as the costs of project, and the benefits were calculated from the saving of waste-treatment cost through reuse of dredged sediment, the saving of construction cost of settling pond, and the values of retained water by dredging. Although the economic feasibility depended on the sites of operation, the average B/C value of the pilot project was estimated as 1.32, indicating this project is economically feasible. Depending on the treatment methods, the B/C values were in the order of the methods of coagulating sedimentation, machinery dewatering, stabilization through exothermic reaction, and soil improvement and stabilization. The machinery dewatering method is estimated as the most adequate one to treat the dredged sediments because of the minimum riskiness of secondary pollution, the recyclability, and its economic feasibility.

• Resources Recycling
• /
• v.13 no.4
• /
• pp.23-31
• /
• 2004

Basic studies have been conducted regarding the attempt of the utilization of waste Undaria pinnatifida as an adsorbent for the adsorption treatment of lead-containing wastewater. Undaria pinnatifida was found to be chiefly composed of hyo-carbonaceous compounds and have a fairly high specific surface area, which suggesting the possibility of its application as a Potential adsorbent. The electrokinetic Potential of Undaria pinnatifida particles was observed to be negatively highest at around pH 8 and the fact that its electrokinetic potentials are negative at the whole pH range supported it might be an efficient adsorbent especially for cationic adsorbates. Under the experimental conditions, $Pb^{2+}$ was found to mostly adsorb onto Undaria pinnatifida within a few minutes and reach the equilibrium in adsorption within ca. 30 minutes. The adsorption of $Pb^{2+}$ was exothermic and explained well by e Freundlich model. Acidic pretreatment of Undaria pinnatifida enhanced its adsorption capacity for $Pb^{2+}$ , however, the reverse was observed for alkaline pretreatment. The formation of organometallic complex between $Pb^{2+}$ and some functional groups on the surface of Undaria pinnatifida was considered to be one of the main drives for adsorption. Finally the adsorbability of$ Pb^{2+}$ was examined to be rather affected by several solution features such as the coexistence of other adsorbate, the variation of ionic strength, and the concentration of complexing agent.

• Resources Recycling
• /
• v.30 no.6
• /
• pp.19-27
• /
• 2021

Electrically conductive mortar used in industrial carbon material byproducts was manufactured and analyzed in this study. The contents of the carbon material and mixed water were controlled, and the distance between electrodes was set to 0.42 m and 0.88 m. The carbon material was graphite with a layered structure. The carbon material was used as fine powder and aggregate substitutes according to particle size. The average particle sizes of each materials were 18.4㎛ and 546.1 ㎛ and the electrical conductivities were 62.3 S/m and 32.5 S/m, respectively. To maintain similar mortar flow in each sample, the water content was increased with increasing carbon material, and accordingly, the porosity showed an increasing trend. When electrode distance of the mortar (week 6) was 0.42 m, the voltage-current values were 342 V-1.48 A (S20) and 349 V-1.44 A (S30). For electrode distance of 0.88 m, these values were 513 V-0.98 A (S20) and 500 V-1.01 A (S30). The exothermic properties improved with increasing carbon material content and decreasing electrode distance.

• Korean Journal of Food Science and Technology
• /
• v.51 no.1
• /
• pp.1-6
• /
• 2019

Horse fat was vacuum-extracted from fatty tissues of Jeju and Halla horse meat and their physicochemical properties were compared to those of commercial lard and beef-tallow. For color, ${\Delta}E$ was found to be decreased when crystallized. Although acid values of horse fat were higher than those of lard and beef-tallow, p-anisidine and totox values were lower. The iodine value of beef-tallow was the lowest (44.61), and those of horse fat and lard were similar (57.53-57.74). Only horse fat contained ${\alpha}-tocopherol$. The contents of ${\gamma}-tocopherol$ in Jeju and Halla horse fat, lard, and beef-tallow were 7.08, 4.57, 2.13, and 1.91 mg/kg, respectively. Palmitoleic acid ($C_{16:1}$) was found in horse fat. Melting and crystallization curves of horse fat displayed two endothermic and exothermic peaks which were differentiated from lard and beef-tallow. These results indicated that horse fat demonstrates different physicochemical properties compared to lard and beef-tallow, when applied to various types of lipid products.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.2
• /
• pp.668-675
• /
• 2019

Fine dust in air pollutants is recognized as one of the most serious social environmental problems. Most of the NOx is generated in a combustion process such as that of a coal-fired power plant, and therefore efficient elimination of the NOx from the coal-fired power plants is needed. This study investigates the removal efficiency of using $TiO_2$, a photocatalyst, to remove NOx by Selective Catalytic Reduction (SCR). To evaluate the NOx removal efficiency, $TiO_2$ catalyst and phosphate binder were mixed on the surface of the $Al_2O_3$ substrate with the exothermic agent, and the substrate was heat-treated. The NOx removal efficiency of the catalysts was evaluated according to the temperature, and XRD, SEM, TG-DTA and BET analyzes were performed to investigate the physicochemical properties of the catalysts. NOx removal efficiency was 58.7%~65.9% at 20min, 63.7~66.0% at 30min with temperature change according to time($250^{\circ}C{\sim}500^{\circ}C$). The $TiO_2$ used in the SCR for NOx removal is judged to have the most efficient removal efficiency at $300^{\circ}C$.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.2
• /
• pp.407-416
• /
• 2019

The criticical micelle concentration (CMC) was measured by using the UV-Vis method for the micellization of the ammonium type cationic surfactants (DTAB, TTAB, and CTAB) in the aqueous aniline solution. The enthalpy change (${\Delta}H^0$) and entropy change (${\Delta}S^0$) were calculated from the dependence of Gibbs free energy change (${\Delta}G^0$) on the temperature for micellization of the cationic surfactants between 290K and 314K. The effects of n-butanol and sodium chloride on the micellization of cationic surfactants were measured and compared with the other thermodynamic functions. All the free energy changes (${\Delta}G^0$) of the micellization were negative, all the enthalpy change (${\Delta}H^0$) were negative, and all the entropy change (${\Delta}S^0$) were positive values, respectively. The micelle formation of cationic surfactant in aniline solution is a spontaneous exothermic reaction, and the iso-structural temperature calculated from the thermodynamic values show that enthalpy and entropy contribution to the micellization are almost the same for the micellization of cationic surfactants

• Korean Journal of Heritage: History & Science
• /
• v.46 no.2
• /
• pp.206-219
• /
• 2013

This study aims to estimate firing temperature and physicochemical properties of the four clay bricks excavated from the Maritime Province of Siberia. Analysis result shows that the specimens are composed of clay, quartz and feldspar, and some specimens include carbonized organic materials which were probably added in order to enhance its physical strength in bricks. Major mineral components of the bricks are quartz, illite and clay minerals. The result identifying the existence of silimanite by XRD suggests that white material of the Koc 1 was painted for a certain purpose. Unlike most specimens which contained hematite, several samples contain Mullite. Such result suggests that some bricks were fired at high temperature. Furthermore, the results from TG analysis which does not display exothermic peak which appears at between $800^{\circ}C$ to $1,000^{\circ}C$ but display endothermic peak at $900^{\circ}C$ and it also confirms that they were exposed at $900^{\circ}C$ or higher.