• 한국의류학회지
• /
• 제47권2호
• /
• pp.337-352
• /
• 2023

This study develops a t-shirt design that align bones and balance muscles in order to maintain proper posture using the basic concepts of symmetry. First, theoretical and 3D design studies, existing literature on proper and improper posture, and the basic concepts of symmetry are studied to create the design. Next, the 3D design process applies bilateral, rotational, and scaling symmetries to design the inner lines from the basic application of symmetry. A two-stage design process is used, whereby the strain map and pressure points are analyzed using the CLO virtual clothing software, and the most effective design is determined through virtual testing. The results show that the Y+)( and X+― design, which combines the position and type of inner lines, is the most effective for posture correction and maintenance. Overall, this study helps create a theoretical and practical basis for exploring and understanding basic lines appropriate for the human body, and subsequently, for developing various products that maintain posture more accurately and precisely.

• 천문학회보
• /
• 제44권2호
• /
• pp.36.2-36.2
• /
• 2019

Fe II emission is a prominent and ubiquitous feature in the spectra of broad-line Active Galactic Nuclei (AGN) by producing a pseudo-continuum from UV to optical with complex and strong blends of the numerous emission lines themselves, other emission lines, and continuum. Since theoretical modeling of such intricate Fe II emission is very difficult and still far from able to reproduce observed data in detail, an empirical iron emission template, derived from observations of a narrow-line Seyfert 1 galaxy, is an essential and practical tool to obtain accurate measurements of all the emission lines and continuum in AGN spectra. However, the existing iron templates, based on the single prototypical strong Fe II emitter I Zw 1, are suffering from inadequate S/N and non-simultaneous, inconsistent data with limited wavelength coverage, which consequently limit the accuracy of all the spectral measurements. To overcome the limitations and construct an improved iron template with wide spectral coverage, high-quality UV and optical spectra for the new and better identified template galaxy, Mrk 493, were successfully obtained from our HST STIS program (GO-14744). We will show the preliminary results for multicomponent spectral decomposition of the data and template construction with application tests to various AGN spectra and comparison with previous templates.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 봄 학술발표회논문집
• /
• pp.187-194
• /
• 2000

Weight reduction for an automobile body is being sought for the fuel efficiency and the energy conservation. One way of the efforts is adopting Ultra Light Steel Auto Body (ULSAB) concept. The ULSAB concept can be used for the light weight of an automobile door with the tailor welded blank (TWB). A design process is defined for the TWB. The inner panel of door is designed by the TWB and optimization. The design starts from an existing component. At first, the hinge and inner reinforcements are removed. In the conceptual design stage, topology optimization is conducted to find the distribution of variable thicknesses. The number of parts and the welding lines are determined from the topology design. In the detailed design process, size optimization is carried out to find thickness while stiffness constraints are satisfied. The final parting lines are determined by shape optimization.

• 한국경영과학회지
• /
• 제19권2호
• /
• pp.217-228
• /
• 1994

This paper presents a new integer formulation (Type III ALB) for a single model assembly line balancing problem. The objective of the formulation is to minimize the total idle time, which is defined as the product of the number of work stations and the cycle times minus the total work content. This formulation considers currently existing Type I (minimizing the number of work stations for a given cycle time) and type II (minimizing the cycle time for a given number of work stations) formulations as its special cases and provides the global minimum solutions of the cycle time and the number of work stations. This information would be of great value to line designers involved in designing new assembly lines and rebalancing old lines under flexible conditions. Solution methods based on combination of Type I and Type II approaches are also suggested and compared.

• 대한기계학회논문집
• /
• 제17권12호
• /
• pp.2995-3006
• /
• 1993

An automatic mesh generation scheme has been developed for finite element analysis with two-dimensional, quadrilateral elements. The basic strategies of the method are to transform the analysis domain into loops with key nodes and the loops are recursively subdivided into subloops with the use of best split lines. Finally by using the basic loop operators, the meshes are completed. In this algorithm an eight-node loop operator is proposed, which is useful in the area where the change of element size is large and the splitting criteria for subdividing the loops have also been modified to the existing algorithms. Lines, arcs, and cubic spline curves are used to define the boundaries of analysis domain. Sample meshes for several geometries are presented to demonstrate the robustness of the algorithm.

• 조명전기설비학회논문지
• /
• 제25권7호
• /
• pp.72-77
• /
• 2011

Dynamic Line Rating (DLR) techniques have been greatly worthy of notice for efficiently increasing transmission capacity as well as controlling load-flow in overhead transmission lines, in comparison with the existing power system operating with Static Line Rating (SLR). This paper describes an utilization method to implement DLR control system for old transmission lines built in the first stage using the ground clearance design standard with lower dips. The suggested DLR system is focused on designing as temperature control system rather than current/load control system. Based on several performance for conductor temperatures, it is shown that DLR system with efficiency can be implemented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
• /
• pp.2690-2692
• /
• 2005

CAN communication can minimize the interfacing lines between equipments because it is composed of only the input and output lines, also is used for automatic system including vehicle, aircraft, railway vehicles and robot because the reliability of data is high by the capability of data-related error detect and correcting function. It can also improve the low-reliable and inefficient system which is composed of the existing Wiring Harness(W/H), so in case of vehicle, it is used in place of the present ECU as the new electro-control unit. In this paper, we constructed the electro-control unit of vehicle by using CAN communication and implemented system that could monitor the condition of vehicle through the web or mobile by connecting the electro-control unit to imbedded system. Such a system is expected to be helpful to the intelligent vehicle and the adoption of ACC(Adaptive Cruise Control).

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1259-1265
• /
• 2004

Railway is an important transportation tool for nation's industrial development and public daily life. These days the concern about railway has remarkably been rising due to the April 2004 opening of KTX, Korea High Speed Rail, together with Trans-Continental Railways linking North Korea, China, Russia, through European countries. In the meantime, the issues of train safety and efficiency, arising from the different on-board signaling systems installed on different kinds of trains, have been raised incessantly. In this paper CTCS(Continental Train Control System) is suggested, which can accommodate such various signaling functions as ATP, ATC, ATS, etc. into one single type of on-board signaling system and operate without changing ground signaling systems on the junctions of the Trans-Continental Railways. The development of this CTCS would cause speed-up of exiting lines and possession of railway core solutions for establishing Northeast Asia logistics center bases, which could be an important cornerstone for domestic railway improvements and Korea's role of Northeast Hub.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1456-1458
• /
• 1999

As the system reliability of power supply is highly increased, we need distribution maintenance techniques without any power interruption. To meet such an increasing demand, a groat deal of hot line work on the high voltage overhead distribution lines has been carried out. In this regard, Hot line work techniques has being applied widely. However, hot line work techniques can not cover all kinds of work without interruption. To cope with those problems, the temporary power supply work technique such as bypass cable truck technique, temporary switch technique and mobile transformer technique was developed and applied. This paper presents the most optimal method according to distribution work contents through the comparison and analysis the characteristis and problems of the existing various work techniques. Also this paper suggested the countermeasers of the prsent problems.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.620-625
• /
• 2007

According to 'Metropolitan Traffic Network Plan' announced in 2001, radial railways which connect Seoul with satellite cities around Seoul appear gradually. And followed by this, social demand for circular metropolitan railways that can connect the radial railways horizontally is increasing. But existing plans about circular metropolitan railways has limits to propose only passing cities of the railways. If there is no detailed guideline for circular metropolitan railways, the each railway for circular line will be constructed individually and then it will be not effective circular railways totally. Additionally that railway project will be easily interrupted by popular complaints. Therefore "The basic plan for circular metropolitan railways" is needful to guide a right direction for circular metropolitan railways. In this paper, rough track diagram of 'node' station for circular metropolitan railways is proposed. It is essential part of the basic plan. If the track diagram of a node is publicized in advance and individually lines of circular metropolitan railways is enforced to followed it, all lines will has rich circular functionality. Finally, effective circular metropolitan railways can be built.