• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.393-397
• /
• 2001

The innovatory process, that is the direct separation and recovery of the iron and zinc metals contained in the high temperature exhaust gas generated from the electric arc furnace fer the inn scrap melting and/or the dust treatment, has been proposed. This proposed process consists of the moving coke bed filter that is directly connected to the electric furnace, and the following heavy metal condenser. The exhaust gas passes through the filter and the condenser right after exhausting from the electric furnace. The moving coke bed filter is being controlled at about 1000℃ and collects iron and slag components contained in the high temperature exhaust gas. Heavy metals such as zinc and lead pass through the filter as vapor. Based on the thermodynamic considerations, the iron oxide and the zinc oxide are reduced in the filter. The solution loss reaction rate is comparatively low at about 1000℃ in the coke bed filter by the analysis using the mathematical simulation model. The heavy metal condenser is installed in the position after the coke bed filter, and rapidly cools the gas from about 1000℃ to 450℃ by a full of the cooling medium like the solid ceramic ball in addition to the cooling from the wall. The zinc and lead vapor condense and separate f개m the gas in a liquid state. The investigation of the characteristics of the exhaust gas of the commercial electric arc furnace, the fundamental experiments of the laboratory scale and the bench scale ensured the formation of this proposed process. A small-scale pilot plant examination is carrying out at present to confirm the formation of the process. It is certain that the dust generation of the electric arc furnace is extremely decreased, and it can save the energy consumption of usual dust treatment processes by the realization of this process.

• 한국레이저가공학회지
• /
• 제5권1호
• /
• pp.33-42
• /
• 2002

In order to investigate the characteristics of the plasma induced by lap-joint CO$_2$ laser welding of automotive steel sheets, the effects of welding speed, shield gas flow rate, gap size, and laser beam defocus to plasma intensity emitted from keyhole have been investigated. The plasma light is measured by fiber and photodiode. Also, the plasma images were captured by the high speed digital camera in 1000frames/sec in order to correlate the plasma light signal with plasma pattern. From the results, it is observed that the difference of the plasma intensity for between the deep penetration and partial penetration exists from 1.2 to 2 times. The plasma light intensity decreased in case of the deep penetration Is observed due to the exhausting of the plasma gas under the sheet. On the other hand, under the conditions of the deep penetration, the plasma intensity is significantly increased by controling the conditions decreasing the penetration depth. It was specially founded that the effect of 0.3mm gap size at partial penetration condition is approximately similar to deep penetration in 0mm gap. It is concluded that the plasma intensity is able to evaluate the penetration depth in lap-joint welding and appears to offer the most straightforward correlation to the welding process.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1238-1243
• /
• 2009

As Social Overhead Capital(SOC) has been expanded, the highway road construction has been accelerated and city road system has been more complicated. So, long road tunnels have been increased and traffic flow rate also has been raised. Accordingly, the exhausting gas of vehicle cars seriously deteriorates the tunnel inside air quality and driving view. In order to improve tunnel inside air quality, it is needed to introduce a compulsory ventilation system as well as natural ventilation mechanism. The former, that is, a special compulsory ventilation facility is very useful and helpful to prevent a tunnel of being contaminated by traffic in most case. In the case of obtaining clearer and longer driving view, the ventilation systems have to be considered in order to remove floating contaminants or exhaust gas from engines. In this paper, discharge electrode design technology will be discussed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.897-900
• /
• 2007

Vehicles are exhausting various environmental pollutions such as exhaust gas, noise, and so on. This study investigates only noise problems by vehicles, especially the vehicle exhaust noise. It is known that the exhaust noise among those is over 20% of vehicle noise when the vehicle is suddenly accelerated or normally accelerated. In this study, we mainly investigate the exhaust noise of vehicle so that we intend to show the measures to decrease the illegal tuning mufflers and reduce the exhaust noise problems. In the conclusion, we suggest the new appropriate standard to control the tuning mufflers and reduce the exhaust noise induced by vehicles.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
• /
• pp.248-255
• /
• 2004

For the compactness of regenerative combustion, self regenerative combustion and embedding regenerator inside furnace are proposed. The Self Regenerative burner system was developed to enhance thermal efficiency and Low Nox emission. In the twin regenerative system, two burner heads are generally used for preheating and exhausting combustion mode. But self regenerative burner system use only single nozzle body for regenerative combustion. Also two kind of regenerator, internal and external type, were designed to operate conveniently in both large and small furnace. According to test result, the self regenerative combustion system gives strong internal exhaust gas recirculation that reduce NOx emission significantly. NOx was measured as 50ppm(5% O2, 1290C furnace temperature). Also it is found that the fuel saving rate due to the self regenerative burner system reach to 30-40%. Thus it can be concluded that self regenerative mild combustion system appears to provide a reasonable regenerative burner for compactness and high performance as compared with conventional twin regenerative burner system. Also in the RT Application , compact twin regenerative burner was developed with the help of embedding regenerator inside furnace.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.23-23
• /
• 1998

High resolution field emission dispplay(FED) devices of 5 inch diagonal in size are fully developped for the applications of near-future flat ppanel dispplays. Under the unique gate-switching drive scheme electron trajectory pprofiles are simulated and tested by considering leakage effects of each ppixel. Uniquely-pprinted sppacer with high asppect ratio are fabricated on real ITO glass for high vacuum ppackaging. In addition new gas aging scheme of stabilizing field emitting array are extensively investigated during the sealing and exhausting pprocess in order to pprevent oxidation effects on the micro tipp. Finally fulll color images of 64 gray scale will be demonstrated.

• 설비공학논문집
• /
• 제14권10호
• /
• pp.811-816
• /
• 2002

Waste heat exhausted from seven types of the domestic industry was surveyed, which include food, fibre, paper & wood, chemical, ceramics, metalworking and others. The databases of waste heat for each industry were made by using ACCESS software of Microsoft, and data were analyzed to get correlation between waste heat and purchase energy. The volume of usable waste heat is estimated to be 9,169,000 TOE in the year of 2000, when the minimum available temperature is set as $100^{\circ}C$ for waste gas, $30^{\circ}C$ for hot water and $100^{\circ}C$ for steam considering the condition of waste heat exhausting facilities and surroundings. This volume of waste heat is approximately 11.9 percent of the purchase energy of the domestic industry.

• 한국소음진동공학회논문집
• /
• 제18권12호
• /
• pp.1224-1228
• /
• 2008

Vehicles are exhausting various environmental pollutions such as exhaust gas, noise, and so on. This study investigates only noise problems by vehicles, especially the vehicle exhaust noise. It is known that the exhaust noise among vehicle noises is over 20% of those when the vehicle is suddenly accelerated or normally accelerated. In this study, we mainly investigate the exhaust noise of vehicle so that we intend to show the measures to decrease the illegal tuning mufflers and reduce the exhaust noise problems. In the conclusion, we suggest the new appropriate standard to control the tuning mufflers and reduce the exhaust noise induced by vehicles.

• 한국산학기술학회논문지
• /
• 제14권7호
• /
• pp.3508-3517
• /
• 2013

지구(district)는 도시를 형성하는 기본 단위로 모든 도시활동이 시작되는 장소이다. 따라서 본 연구에서는 지구단위에서의 교통과 토지이용패턴의 결합 형태에 따른 270개의 시나리오를 가정하고 $CO_2$ 배출량을 분석한 후 $CO_2$ 배출량을 최소화하는 토지이용-교통모형을 작성하고자 하였다. 그 결과 균등 또는 외곽을 고밀도로 개발하는 토지이용패턴이 지구의 중간부나 1개 중앙존만을 개발하는 것보다 $CO_2$ 배출량 감소에 유리한 것으로 파악되었다. $CO_2$ 배출량 감소에 가장 영향을 많이 주는 것은 교통수요관리정책으로, 특히 개발밀도가 높은 상태일수록 $CO_2$를 감소시키기 위해서 교통수요관리는 필수적인 것으로 판단되었다. 고밀개발이 아닌 경우에 주어진 가상 네트워크에서는 2차로도로에 차량통행금지를 시키고 보행자도로로 전환시킬 경우 $CO_2$ 배출량을 감소시킬 수 있음을 알게 되었다. 한편, 제시된 토지이용-교통 회귀모델은 지구설계시 $CO_2$ 배출량을 줄이기 위한 최적대안 선정시 도움을 줄 수 있을 것으로 사료된다.

• Korean Chemical Engineering Research
• /
• 제59권4호
• /
• pp.521-531
• /
• 2021

진공가압함침공정(Vacuum Pressure Impregnation, VPI)은 발전기, 전동기 등 대형 회전기에 사용되는 고정자 권선에 에폭시 계열의 레진을 코팅시켜 물성을 강화하는 공정이다. VPI 공정 중 진공과 가압과정에서 에폭시 레진의 기화에 의해 레진 가스가 발생하고, 함침공정이 끝나고 경화를 위해 탱크 개방 시 레진 가스가 제거되지 않고 탱크 밖으로 유출된다. 유출된 레진 가스가 작업장 전체에 확산 시 화재, 폭발 및 호흡기 문제와 같은 안전 환경 문제가 있으므로 공정 내 레진 가스 배출시스템이 필요하다. 따라서, 본 연구에서는 VPI 공정에서 발생한 레진 가스를 배출하는 시스템을 설계하기 위해 전산유체역학(Computational Fluid Dynamics, CFD)을 이용하여 공기 유입구·배출구의 위치에 따른 배출효율에 대한 사례연구를 진행하였다. 본 연구의 최적의 배출시스템을 활용 시 1,800초 이내 90%이상의 레진 가스를 배출할 수 있으며, 레진 가스의 폭발하한계(Low Explosive Limit, LEL)이하로 레진 가스의 분율을 낮출 수 있었다.