• 한국자동차공학회논문집
• /
• 제19권2호
• /
• pp.98-104
• /
• 2011

The introduction of a diesel engine into the passenger car and light duty applications in the United States involves significant technical challenges for the automotive makers. This paper describes the SCR System optimization procedure for such a diesel engine application to meet Tier2 Bin5 emission regulation. A urea SCR system, a representative $NO_x$ reduction after-treatment technique, is applied to a 3.0 liter diesel engine. To achieve the maximum $NO_x$ reduction performance, the exhaust system layout was optimized using series of the computational fluid dynamics and the urea distribution uniformity test. Furthermore a comprehensive simulation model for the key factors influencing $NO_x$ reduction performance was developed and embedded in the Simulink/Matlab environment. This model was then applied to the urea SCR system and played a key role to shorten the time needed for SCR control parameter calibration. The potential of a urea SCR system for reducing diesel $NO_x$ emission is shown for FTP75 and US06 emission standard test cycle.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권2호
• /
• pp.270-278
• /
• 2017

This paper describes development procedure and verification test results of a bi-propellant thruster using hydrogen peroxide and kerosene. The design thrust of the thruster is about 500 N and six swirl type coaxial injectors were used. The passage type manifolds were employed for the injector head to reduce the response time. The passage was designed to minimize stagnation points and recirculation region to ensure uniform flow distribution and sufficient cooling performance through flow analysis using Fluent. A catalytic igniter using hydrogen peroxide was installed at the center of the injector head. The propellant feeding and spray characteristics were confirmed by hydraulic tests. Combustion tests were performed on design and off-design points to analyze combustion characteristics under various mixture ratio conditions. The combustion test results show that combustion efficiency was over 95 % and chamber pressure fluctuation were less than 1.5 % under all test conditions.

• 한국연소학회지
• /
• 제15권3호
• /
• pp.48-56
• /
• 2010

Performances of power generation engine were investigated with syngas from RPF. A stoker type, multi-staged pyrolysis-gasification system, was employed for syngas generation and the syngas was refined with the sequential cleaning processes composed of a gas cooler, a bag filter and a wet scrubber. 20 kWe commercial syngas power generation engine was adopted to burn the cleaned syngas which is mainly composed of hydrogen, carbon monoxide, carbon dioxide and methane. The performance of the engine was tested with various syngas compositions and the results were compared to LNG case. Electric power output, exhaust gas temperature, and emission characteristics were measured, and the efficiency of engine generation was investigated as a function of load of power generation.

• Journal of Welding and Joining
• /
• 제34권5호
• /
• pp.19-25
• /
• 2016

Global warming is hot issue to keep the earth everlastingly. Despite the increase of the world population and the energy demand, the world oil supply and the oil price are hold the steady state. If we are not decrease the world population and the energy consumption, unforeseeable energy crisis will come in the immediate future. AMT acronym of Advanced Materials for Transportation is a non-profitable IEA-affiliated organization to mitigate the oil consumption and the environment contamination for the transportation. In recent, Annex X Multi-materials Joining was added to enhance the car body weight reduction cause the high fuel efficiency and the low emission of exhaust gas. Multi-materials are the advanced materials application technology to optimize the weight, the performance and the cost with the combination of different materials such as Al-alloy, Mg- alloy, AHSS and CFRP. In this study, the trends of AMT strategy and Al-alloy based multi-materials joining technology were review. Also several technologies for Al-alloy dissimilar joining were investigated.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.134-137
• /
• 2009

본 연구에서는 친환경 추진제인 고농도 과산화수소와 케로신을 사용하는 저추력 이원추진제 로켓 엔진의 O/F ratio에 따른 연소 성능 특성을 파악하였다. 연소시험에 사용된 엔진은 6개의 동축 스월 인젝터로 구성된 멀티 인젝터와 연소실, 노즐로 구성되어있으며, 촉매 점화 방식을 사용하였다. 연소 시험은 O/F ratio 3.8에서 11.0까지 변화시켜가며 수행하였다. 연소 시험 결과를 이용하여 특성 속도($C^*$)와 압력 섭동 값을 계산한 결과, 연소 효율은 O/F ratio 5~6 구간에서 가장 좋았으며 모든 구간에서 연소실 압력대비 압력 섭동 값이 5% 미만으로 안정적임을 확인하였다.

• 한국산업보건학회지
• /
• 제10권2호
• /
• pp.98-108
• /
• 2000

Controlling the over-exposure of welding fumes is not an easy problem because neither general nor local exhaust ventilation systems could be successfully applied. A jet air supplying welding mask was development to reduce the exposure level of welding fumes. The jet airs tream pushes the welding fumes away from the breathing zone by using the frictional characteristic of jet. Laboratory experiments were conducted to optimize the efficiency of controlling welding fumes. Thereafter, its performance was tested in a laboratory and an industrial field. The efficiencies of reducing the welding fume exposure were about 90% and 80% in a laboratory and an industrial field, respectively. Additionally, it resulted in elimination of heat inside the mask and enhancement of clear visuality.

• 한국수소및신에너지학회논문집
• /
• 제23권1호
• /
• pp.65-72
• /
• 2012

Rankine cycle using ammonia-water mixture as a working fluid has attracted much attention, since it may be a very useful device to extract power from low-temperature heat source. In this work, the thermodynamic performance of regenerative ammonia-water Rankine cycle is thoroughly investigated based on the second law of thermodynamics and exergy analysis, when the energy source is low-temperature heat source in the form of sensible energy. In analyzing the power cycle, several key system parameters such as ammonia mass concentration in the mixture and turbine inlet pressure are studied to examine their effects on the system performance including exergy destructions or anergies of system components, efficiencies based on the first and second laws of thermodynamics. The results show that as the ammonia concentration increases, exergy exhaust increases but exergy destruction at the heat exchanger increases. The second-law efficiency has an optimum value with respect to the ammonia concentration.

• 한국분무공학회지
• /
• 제18권2호
• /
• pp.100-105
• /
• 2013

While variable valve actuation or variable valve lift (VVL) is used increasingly in spark ignition (SI) engines to improve the volumetric efficiency or to reduce the pumping losses, it is necessary to understand the impact of variable valve lift and timing on the in-cylinder gas motions and mixing processes. In this paper, characteristics of the in-cylinder flow and fuel distribution for various valve lifts (4, 6, 8, 10 mm) were simulated in a GDI engine. It is expected that the investigation will be helpful in understanding and improving GDI combustion when a VVL system is used. The CFD results showed that a increased valve lift could significantly enhance the mixture and in-cylinder tumble motion because of the accelerated air flow. Also, it can be found that the fuel distribution is more affected by earlier injection (during intake process) than that of later injection (end of compression). These may contribute to an improvement in the air-fuel mixing but also to an optimization of intake and exhaust system.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권9호
• /
• pp.1039-1044
• /
• 2014

가혹한 조건에서 작동하는 디젤엔진의 윤활성능을 향상시키기 위하여 많은 연구가 진행되고 있다. 본 연구에서는 특수윤활제로 사용되고 있는 나노다이아몬드를 포함한 윤활제를 디젤엔진에 적용하여 엔진성능에 미치는 영향을 분석하고자 한다. 매트릭스 합성분산법에 의하여 제조된 나노다이아몬드 윤활제를 농도별로 실험하여 기본윤활제와 비교하였다. 실험결과 마찰저감에 의한 효율의 향상과 일산화탄소, 스모크 등의 배기 저감의 효과를 확인하였다.

• 한국CDE학회논문집
• /
• 제10권1호
• /
• pp.1-10
• /
• 2005

This paper presents an embodiment of design integration framework corresponding to changes in the latest manufacturing environment. The embodied system is named by 'WEB-KBE System' because it supports a product design with a KBE technique based on web environment. The final purpose of the work is to implement a web-based integration design environment with a KBE technique to support non-skillful designers. The framework of the system Is designed to support necessary items in user-centric design environment. Two case studies were applied to the WEB-KBE system to evaluate the efficiency, flexibility, extensibility, and reusability of the system. The examples are [1] CART integration design environment construction and (2) Exhaust Duct Saddle Support integration design environment construction. In the former case, it took a period of 8 months for modeling and implementation of the WEB-KBE prototype system. However, with the high extensibility and reusability of WEB-KBE system, the second case required only a period of one month for modeling and implementation of the system. We conclude that the presented WEB-KBE system can bring fair effects on implementing a knowledge based design environment in aspect of time and expense.