• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.2
• /
• pp.73-83
• /
• 2007

In network intrusion prevention, attack packets are detected and filtered out based on their attack signatures. Pattern matching is extensively used to find attack signatures and the most time-consuming execution part of Network Intrusion Prevention Systems(NIPS). Pattern matching is usually accelerated by hardware and should be performed at wire speed in NIPS. However, that alone is not good enough. First, pattern matching hardware should be able to generate sufficient pattern match information including the pattern index number and the location of the match found at wire speed. Second, it should support pattern grouping to reduce unnecessary pattern matches. Third, it should always have a constant worst-case performance even if the number of patterns is increased. Finally it should be able to update patterns in a few minutes or seconds without stopping its operations, We propose a system architecture to meet the above requirement. The system architecture can process multiple pattern characters in parallel and employs a pipeline architecture to achieve high speed. Using Xilinx FPGA simulation, we show that the new system stales well to achieve a high speed oner 10Gbps and satisfies all of the above requirements.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.8
• /
• pp.4033-4038
• /
• 2013

Sedimentary rocks from construction waste are discarded through open storage and landfilling, which causes an increase in construction cost and inefficient of execution of works. Some sandstone are selected and utilized as aggregates, but shale is buried as industrial waste. Therefore, in this research, we evaluated weathering properties of shale aggregate that is widely distributed throughout Daegu-Kyeongbuk region and freeze-thaw characteristics of concrete according to the replacement ratio of shale aggregate, in an effort to stabilize aggregate supply-demand in Daegu-Kyeongbuk region and develop alternative aggregates. We used red shale and black shale in the experiment, which were exported from a construction site in Deagu. We verified the usage of shale as a concrete aggregate by comparing andesite, which is broadly used as a thick aggregate for concrete, to hornfels, which is a metamorphic sedimentary rock. As a result of the experiment, we observed no degradation phenomenon for andesite and hornfels. However, a part of country rock containing black shale was found to be exfoliated. Red shale started having cracks in the direction of stratification after 1.5 months of direct exposure, and it broke into smaller pieces after approximately 4 months. After 300 cycles of freeze-thaw process on the concrete manufactured according to the replacement ratio of shale aggregate, the modulus of elasticity was 97% for plain and 95% for hornfels. In the case of RS_100, it was 57% after 210 cycles, and for BS_100, it was 54% after 240 cycles. Therefore, we established that, as the number of repetition increases, the freeze-thaw resistance decreases dramatically.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.9_10
• /
• pp.429-440
• /
• 2008

As embedded system becomes more complex, software development becomes more important in the entire design process. Most embedded applications consist of multi -tasks, that are executed in parallel. So, dataflow model that expresses concurrency naturally is preferred than sequential programming language to develop multitask software. For the execution of multitasking codes, operating system is essential to schedule multi-tasks and to deal with the communication between tasks. But, it is needed to execute multitasking code without as when the target hardware platform cannot execute as or target platforms are candidates of design space exploration, because it is very costly to port as for all candidate platforms of DSE. For this reason, we propose the serialized multitasking code generation technique from dataflow specification. In the proposed technique, a task is specified with dataflow model, and generated as a C code. Code generation consists of two steps: First, a block in a task is generated as a separate function. Second, generated functions are scheduled by a multitasking scheduler that is also generated automatically. To make it easy to write customized scheduler manually, the data structure and information of each task are defined. With the preliminary experiment of DivX player, it is confirmed that the generated code from the proposed framework is efficiently and correctly executed on the target system.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.10
• /
• pp.746-758
• /
• 2006

Many objects existing on wide area environments have the replication characteristics according to how to categorize using their own names or properties. From the clients' requests, the existing naming and trading services have not supported with the binding service for replicated solver object with the same service type. For this reason, we present an integrated model that can support the selection of replicated object and dynamic binding services on wide-area computing environments. This model suggests provides not only location management of replicated objects but also active binding service which enables to select a least-loaded object on the system to keep the balance of load between systems. In this purpose, constructing both the service plan and model for support solver object's binding with replication property on wide area computing environments has been researched. In this paper, we showed the test environment and analyzed the performance evaluation of client/server binding procedures via integrated binding service in federation model and verified our model under the condition to see whether load balance can be applied to our model. For the performance evaluation of suggested wide area integrated binding service federation model, evaluated the integrated binding service of each domain and analyzed the performance evaluation of process for non-replication object's under federation model environment. Also, we analyzed the performance evaluation of the federation model between domains for wide area environment. From the execution results, we showed the federation model provides lowers search-cost on the physical tree structure of network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8C
• /
• pp.575-582
• /
• 2008

In this paper we described the process and the results of real-time implementation of G.729.1 wideband speech codec which is standardized in SG15 of ITU-T. To apply the codec on ARM926EJ-S(R) processor core. we transformed some parts of the codec C program including basic operations and arithmetic functions into assembly language to operate the codec in real-time. G.729.1 is the standard wideband speech codec of ITU-T having variable bit rates of $8{\sim}32kbps$ and inputs quantized 16 bits PCM signal per sample at the rate of 8kHz or 16kHz sampling. This codec is interoperable with the G.729 and G.729A and the bandwidth extended wideband($50{\sim}7,000Hz$) version of existing narrowband($300{\sim}3,400Hz$) codec to enhance voice quality. The implemented G.729.1 wideband speech codec has the complexity of 31.2 MCPS for encoder and 22.8 MCPS for decoder and the execution time of the codec takes 11.5ms total on the target with 6.75ms and 4.76ms respectively. Also this codec was tested bit by bit exactly against all set of test vectors provided by ITU-T and passed all the test vectors. Besides the codec operated well on the Internet phone in real-time.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.6
• /
• pp.708-716
• /
• 2019

After the Sewol ferry disaster, the maritime safety supervisor system was introduced to strengthen maritime safety control for coastal vessels. If any critical defect is found in vessel facilities during periodical or occasional guidance and supervision on a vessel, a maritime safety supervisor takes an administrative measure: detention of the vessel until it has been completely corrected. The detention order is one of the most powerful regulations exercised by a maritime safety supervisor. It would not be an overstatement to say that the guidance and supervision conducted by a maritime safety supervisor is very important for the safety of a vessel and protection of the maritime environment. However, the regulatory level of each Regional Office of Oceans and Fisheries toward vessels may vary with the enforcers, and an individual's intentional act or negligence might occur during the execution process. Detention of a coastal vessel by the Regional Office of Ocean and Fisheries can easily lead to delayed navigation, and a vessel owner may suffer economic loss from suspension of a charter party. Nevertheless, the Maritime Safety Act does not prescribe filing a petition for objection to the measure of detention order by a maritime safety supervisor. To overcome this problem, therefore, the objection procedure under the Maritime Safety Act has to be reformed to reclaim a right against an inappropriate detention order measure caused by an individual's intentional act or negligence through a formal objection.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.4
• /
• pp.9-21
• /
• 2004

In this paper, we proposed the image hiding method which decreases calculation amount by encrypt partial data using discrete wavelet transform and linear scale quantization which were adopted as the main technique for frequency transform in JPEG2000 standard. Also we used the chaotic system which has smaller calculation amount than other encryption algorithms and then dramatically decreased calculation amount. This method operates encryption process between quantization and entropy coding for preserving compression ratio of images and uses the subband selection method and the random changing method using the chaotic system. For ciphering the quantization index we use a novel image encryption algerian of cyclically shifted in the right or left direction and encrypts two quantization assignment method (Top-down/Reflection code), made change of data less. Also, suggested encryption method to JPEG2000 progressive transmission. The experiments have been performed with the proposed methods implemented in software for about 500 images. consequently, we are sure that the proposed are efficient image encryption methods to acquire the high encryption effect with small amount of encryption. It has been shown that there exits a relation of trade-off between the execution time and the effect of the encryption. It means that the proposed methods can be selectively used according to the application areas. Also, because the proposed methods are performed in the application layer, they are expected to be a good solution for the end-to-end security problem, which is appearing as one of the important problems in the networks with both wired and wireless sections.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.6
• /
• pp.498-510
• /
• 2001

Distraction osteogenesis refers to the biological process responsible for new bone formation between bone segments by gradual distraction after osteotomy. For the past several years, various inconveniences including a protracted consolidation period that requires patients to wear a distractor frame longer, as well as higher medical costs, have not been remedied by improvements in osteotomy, distraction rate and monitoring system. Furthermore, side effects such as pin tract infections and soft tissue swelling may arise due to the long treatment period. These drawbacks form the rationale of this study which purports to seek a method by which the consolidation period can be reduced. This paper examines how platelet-rich plasma(PRP), known to facilitate osteogenesis, influences bone formation when applied in distracted area. Ten mongrel dogs, which were made to wear external distractor frames after osteotomy in both sides of the mandible, were used as subjects. After a 7day period of latency, distraction was carried out at a rate of 1mm/day for 14 consecutive days. After the onset of distraction, 2ml of PRP and a mixture of calcium gluconate and thrombine were injected into the center of the distracted callus on the left side of the mandible. The left was injected with PRP while the right side was set as the control site without PRP treatment. Execution at the onset of distraction and in 2 weeks, 4 weeks and 8 weeks after the consolidation period, clinical and radiographic tests, bone mineral density examination, histological examination and histomorphometric analysis were conducted to compare both sides. The results are summarized as follows: 1. Based on the clinical examination at two weeks, more remarkable cortical bone formation was found on the buccal and lingual side of the distracted area in the PRP treatment site than in the control site. No visual difference was found between the PRP treatment site and the control site at four eight weeks. 2. Based on the radiological examination, a distinct increase in the radiopaque appearance of the PRP treatment site was revealed at two weeks, but this increase appeared to slow down at four and eight weeks. 3. Examination of bone mineral density revealed a significant difference at two weeks with the PRP treatment site yielding density two times higher than the control site. This difference lessened after four weeks, and disappeared at eight weeks. 4. The histomorphometric examination revealed that about 20% more bony trabeculae area(20%, higher) was formed in the PRP treatment site than in the control site. In conclusion, it can be said that PRPs effect on stimulating bone formation in the PRP treatment site manifest as early as two weeks. Trabeculae formation likewise increased throughout the whole period. If this result can be applied to humans, the consolidation period can be reduced by injecting PRP into the distracted area.

• Journal of Korea Port Economic Association
• /
• v.29 no.1
• /
• pp.99-122
• /
• 2013

International Exposition Yeosu Korea 2012 was held from May 12th 2012 to August 12th 2012 in New Port area of Yeosu-city, Jeollanam-do, Korea. 105 Nations and 10 international organizations participated in this mega event, and the total number of visitors amounts to 8.2 million. This study appraises the effectiveness of preparation for Yeosu Exposition. The main focus of this study is not on criticizing the problems that occurred in the transport measures. Instead, it looks at the current aspects of establishment and execution process and suggests how they can be applied differently in future transport management for international mega events held in Korea. The suggestions of this study are as follows. First, when establishing transport management plans for international mega events, the geographical features and trip resistance of the venue must be taken into consideration. Second, tasks should be distributed distinctly between the central government and the local government in order to prevent any dissension or inefficiency. Third, transport management needs to be consistent and transport guidance should be efficient in an effort to minimize visitor inconvenience. Last, transport management must be regarded as objective and rational from the outside view and the budget should follow timely based on this account.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.3
• /
• pp.62-70
• /
• 2011

Nowadays image sensor is an essential component in many multimedia devices, and it is covered by a color filter array to filter out specific color components at each pixel. We need a certain algorithm to combine those color components reconstructed a full color image from incomplete color samples output from an image sensor, which is called a demosaicking process. Most existing demosaicking algorithms are developed for ideal image sensors, but they do not work well for the practical cases because of dissimilar characteristics of each sensor. In this paper, we propose a new demosaicking algorithm in which the color filter characteristics are fully utilized to generate a good image. To demonstrate significance of our algorithm, we used a commerically available sensor, CBN385B, which is a sort of Honeycomb-style CFA(Color Filter Array) CCD image sensor. As a performance metric of the algorithm, PSNR(Peak Signal to Noise Ratio) and RGB distribution of the output image are used. We first implemented our algorithm in C-language for simulation on various input images. As a result, we could obtain much enhanced images whose PSNR was improved by 4~8 dB compared to the commonly idealized approaches, and we also could remove the inclined red property which was an unique characteristics of the image sensor(CBN385B).Then we implemented it in hardware to overcome its problem of computational complexity which made it operate slow in software. The hardware was verified on Spartan-3E FPGA(Field Programable Gate Array) to give almost the same performance as software, but in much faster execution time. The total logic gate count is 45K, and it handles 25 image frmaes per second.