• 한국안전학회지
• /
• 제17권3호
• /
• pp.1-6
• /
• 2002

A dynamic characteristics of shock absorber in the various excitation is investigated experimentally. Work diagrams and characteristic curves are used as a experimental standard. The various excitation conditions temperature and noise are very important factors in associated with the reduction of damping force. It is found that the heat occurrence from shock absorber, the gas shock absorber is much higher than oil shock absorber and increased in high speed. As to the variation of damping force, there are no change when the speed is low but we fixed amount of variation by increasing speed and change of new and old decrease. The sound pressure of the swash noise from cycle of shock absorber, we compared with theory sound pressure by experiment.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.196.1-196.1
• /
• 2014

VO2 exhibits metal-insulator transition (MIT), of which critical temperature (TC) is about 340 K. There have been many reports that MIT can be induced by UV light as well as heat. Clear mechanism regarding such photo-induced MIT has not been clarified. We have compared the MIT behaviors of VO2 thin film during heating-cooling cycles with and without light. We tried several light sources with different wavelengths (red, blue, and UV). Tc and hysteresis width of the resistance change were influenced by the illumination of the samples. We performed Kelvin probe force microscopy (KPFM) studies, which can reveal the evolution of the local sample work function. In this presentation, we will discuss possible physical origins for the photo-induced effects on the MIT behaviors of the VO2 samples.

• Journal of Astronomy and Space Sciences
• /
• 제19권3호
• /
• pp.173-180
• /
• 2002

Images taken with the Chandra X-ray telescope have for the the first time revealed the central, wind-driven, hot bubble (Chu et al. 2001), while Hubble Space Telescope (HST) WFPC2 images of the Cat's Eye nebula, NGC 6543, show that the temperature of the halo region of angular radius ~ 20", is much higher than that of the inner bright H II region. With the coupling of a photoionization calculation to a hydrodynamic simulation, we predict the observed 〔O III〕 line intensities of the halo region with the same O abundance as in the core H II region: oxygen abundance gradient does not appear to exist in the NGC 6543 inner halo. An interaction between a (leaky) fast stellar wind and halo gas may cause the higher excitation temperatures in the halo region and the inner hot bubble region observed with the Chandra X-ray telescope.

• Bulletin of the Korean Chemical Society
• /
• 제24권3호
• /
• pp.384-388
• /
• 2003

The emission and excitation spectra of $cis-[Cr(cyclam)(NCS)_2]NCS$ (cyclam = 1,4,8,11-tetraazacyclotetradecane) taken at 77 K are reported. The infrared and visible spectra at room temperature are also measured. The vibrational intervals due to the electronic ground state are extracted from the far-infrared and emission spectra. The ten pure electronic origins due to spin-allowed and spin-forbidden transitions are assigned by analyzing the absorption and excitation spectra. Using the observed transitions, a ligand field analysis has been performed to determine the bonding properties of the coordinated ligands in the title chromium(Ⅲ) complex. According to the results, it is found that nitrogen atoms of the cyclam ligand have a strong σ-donor character, while the NCS ligand has medium σ- and π-donor properties toward chromium(Ⅲ) ion.

• 대한조선학회논문집
• /
• 제40권2호
• /
• pp.28-33
• /
• 2003

This study is performed to evaluate and design the dynamic characteristics of the onboard machinery with resilient mounts. To avoid resonance with onboard machinery and external force, it is necessary to calculate natural frequencies of the resilient mounting system more accurately. Natural frequencies of on board machinery are determined by rigid body properties(mass, moment of inertia, center of mass) of machinery and stiffness of mounts. But it is very difficult to calculate rigid body properties theoretically. And stiffness properties of rubber mounts vary with dynamic displacement, pre load, frequency and temperature, and so on. In this study, we have identified rigid body properties using experimental modal analysis and estimated dynamic stiffness of rubber mount for onboard machinery using measured vibration response during seatrial. We measured displacement excitation through deck under mounts and evaluated relationship between modes of resilient mounting system and main excitation sources of a ship.

• Bulletin of the Korean Chemical Society
• /
• 제18권1호
• /
• pp.23-27
• /
• 1997

The luminescence and excitation spectra of [Cr(trans-diammac)](ClO4)3 (trans-diammac=trans-6, 3-dimethyl-l, 4, 8, 11-tetraazacyclotetradecane-6, 13-diamine) taken at 77 K are reported. The mid and far-infrared spectra at room-temperature are also measured between 4000 cm-1and 50 cm-1. In the excitation spectrum the 2Eg components are splitted by 102 cm-1. Using the observed electronic transitions, a ligand field analysis was performed to determine more detailed bonding properties of the coordinated atoms toward chromium(Ⅲ). According to the results, we can confirm that the six nitrogen atoms have a strong σ-donor character, and the trans-diammac secondary amine has a greater value of eσ than does the primary amine.

• 대한기계학회논문집B
• /
• 제35권3호
• /
• pp.309-319
• /
• 2011

질소 희석된 프로판 부상화염에서 열손실에 의한 자기진동을 기초로 화염안정화선도를 도출하기 위하여 노즐직경 0.3 mm, 1.0 mm에서 실험적 연구를 수행하였다. 예혼합화염에서 확산화염으로의 전도 열손실에 의한 자기진동 및 매연 복사에 의한 자기진동을 관찰하였다. 0.1 Hz보다 낮은 주파수 성향을 띄는 열손실에 의한 자기진동은 제안된 메커니즘에 의해 잘 묘사되었고 반면 매연복사에 의한 자기진동은 O(0.1 Hz)의 주파수 범위를 나타내었으며 제안된 메커니즘은 항온항습실 실험을 통해 입증하였다. 질소 희석된 프로판 부상화염에서 관찰된 열손실에 의한 자기진동의 특성화는 관련된 변수 및 스트라훌 수에 의해 잘 묘사되었다.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1998년도 PROCEEDINGS OF THE 14TH KACG TECHNICAL MEETING AND THE 5TH KOREA-JAPAN EMGS (ELECTRONIC MATERIALS GROWTH SYMPOSIUM)
• /
• pp.49-54
• /
• 1998

The growth of diamond films in plasma enhanced chemical vapor deposition(PECVD) processes requires high substrate temperatures and gas pressures, as well as high-power excitation of the gas source. Thus determining the substrate temperature in this severe environment is a challenge. The issue is a critical one since substrate temperature is a key parameter for understanding and optimizing diamond film growth. The precise Si substrate temperature calibration based on rapid-scanning spectroscopic ellipsometry have been developed and utilized. Using the true temperature of the top 200 ${\AA}$ of the Si substrate under diamond growth conditions, real time spectroellipsometry (RTSE) has been performed during the nucleation and growth of nanocrystallind thin films prepared by PECVD. RTSE shows that a significant volume fraction of nondiamond(or{{{{ {sp }^{2 } -bonded}}}}) carbon forms during thin film coalescence and is trapped near the substrate interface between ∼300 ${\AA}$ diamond nuclei.

• Bulletin of the Korean Chemical Society
• /
• 제20권9호
• /
• pp.1010-1016
• /
• 1999

We synthesized the photoresponsive side chain polymers containing aminonitro azobenzene for studying the effect of temperature on photoinduced birefringence. Four different copolymers were prepared using methacrylate, α-methylstyrene, and itaconate monomer. Photoisomerization was observed under the exposure of UV light using UV-VIS absorption spectroscopy. Reorientation of polar azobenzene molecules induced optical anisotropy under a linearly polarized light at 532 nm. The change of the birefringence was observed with increasing the sample temperature under a continuous irradiation of excitation light. We could estimate the activation energy of molecular motion in thermal and photochemical mode. Besides the effect of glass transition temperature on the activation energy, we focused our interests on the effect of geometrical hindrance of polar azobenzene molecules and cooperative motion of environmental mesogenic molecules in the vicinity of polar azobenzene molecules.

• Structural Engineering and Mechanics
• /
• 제20권4호
• /
• pp.435-450
• /
• 2005

Here, the dynamic instability characteristics of aero-thermo-mechanically stressed functionally graded plates are investigated using finite element procedure. Temperature field is assumed to be a uniform distribution over the plate surface and varied in thickness direction only. Material properties are assumed to be temperature dependent and graded in the thickness direction according to simple power law distribution. For the numerical illustrations, silicon nitride/stainless steel is considered as functionally graded material. The aerodynamic pressure is evaluated based on first-order high Mach number approximation to the linear potential flow theory. The boundaries of the instability region are obtained using the principle of Bolotin's method and are conveniently represented in the non-dimensional excitation frequency-load amplitude plane. The variation dynamic instability width is highlighted considering various parameters such as gradient index, temperature, aerodynamic and mechanical loads, thickness and aspect ratios, and boundary condition.