• Current Optics and Photonics
• /
• v.6 no.4
• /
• pp.413-419
• /
• 2022

An oxyfluoride glass ceramic containing Eu²⁺-doped nepheline and LaF₃ crystals was modified, with BaF₂ replacing LaF₃ up to 20 mole percent, and its luminescence change was monitored. With increasing BaF₂ content, the greenish yellow emission centered at 540 nm under 400-nm excitation decreased, and a new afterglow emission from the modified ceramic was observed after removal of the excitation light source. X-ray diffraction (XRD) and transmission electron microscopy with energy dispersive spectroscopy (TEM-EDS) were used to investigate the changes in the crystalline phases within the glass matrix. Time dependent emission intensity was monitored to observe the afterglow, and the possible mechanism for the afterglow due to BaF₂ addition was considered.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.9
• /
• pp.158-164
• /
• 1999

In this paper a simple measurement technique for mechanical-acoustic transfer functions is proposed . The mechanical-acoustic transfer functions, generally , are measured through mechanical excitations ; impact hammers or shakers. Recently , by virtue of vibro-acoustical reciprocity principle, they are measured through acoustic excitations : loudspeakers. This kind of test needs to measure the volume velocity , the radiation characteristics of a sound source. Because the volume velocity of the sound source is changed by driving signal , it is difficult to measure it. However , the new method in this paper needs not to measure the volume velocity of a sound source by combination of mechanical and acoustic excitations. Moreover, this method has the methodological advantages, such as usage of a general loudspeaker for the reciprocal excitation, no sptatial limitations for measurements of mechanical-acoustic transfer functions.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.04a
• /
• pp.662-663
• /
• 2014

In most vehicle manufactures have traditionally relied on find-fix method of human auditor, mainly due to variation excitation source. To solve the BSR noise, the requirements for BSR test are presented in terms of detection of noise source, analysis of time-frequency and sound pressure, sound quality for noise. A number of new technology direction, particularly in the field of noise source identification application and psycho-acoustics from the Zwicker's sound quality parameter, the computed objective sound metrics and subjective jury test result.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.2
• /
• pp.168-175
• /
• 1996

The measured vibration on a machine or a structure is shaped by the excitation waveform and the path transfer function. Mechanism diagnostics tends to focus on retrieving source features by minimizing the effects of the structiral path, while in structural diagnostics we are more interested in minimizing source effects and retrieving path parameters. In structural diagnostics, therefore, there are experimental issues of gathering date that are independent source effects and finding a transfer function signature that reveals structural defects. This paper describes how the transfer function can be obtained more accurately by experiment using the compatibility relationship which is newly discovered.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.425-426
• /
• 2010

Recently, Most of diverse noise of vehicles has decreased competitively according to development of the automotive manufacturing technology. Especially, Passenger car manufacturers has been conducting buzz, squeak and rattle(BSR) noise test as a method of the noise evaluation tests to reduce an unpleasant sound from interior parts on the driving the car. This paper suggest a evaluation method for detecting position of noise source from measured noise signals of vehicle seats during random excitation BSR test. Hereby the BSR test procedure used the test regulation of 'G' company. The detection of noise source positions used the Sound image equipment. Through suggested the test method on this paper, an accurate analysis of noise source occurred in the BSR test will be possible.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.1
• /
• pp.166-176
• /
• 1994

The problem of reducing the vibration level of elastic plates driven by multiple random point forces is analyzed in this study. First, the analytical solution for the vibration level of finite thin plates with four simply supported edges under the action of multiple random point force is derived. By assuming the plates to be lightly damped, an approximate solution for the vibration level of the plate is obtained. A numerical study is carried out to determine an optimal spacing distance between the multiple point forces in order to produce a relative minimum in the plate's vibration level. The optimal spacing distance is shown to depend on the given excitation band. The effects of wave cancellation in the near field of the multiple point forces are discussed by using the equivalence of certain stationary random responses and deterministic pulse responese.

• The Korean Journal of Pesticide Science
• /
• v.2 no.3
• /
• pp.79-84
• /
• 1998

Tandem HPLC and atmospheric pressure chemical ionization(APcI) LC/MS method was used for the determination and confirmation of carbendazim residues in soybean sprout. Fluorescence(FL) detector was connected in tandem with the ultraviolet(UV) detector for dual detection of the carbendazim residue at the excitation and emission wavelength of 280 nm and 310 nm, respectively. The limit of detection for carbendazim was $0.1{\mu}g/kg$ sample. Recoveries of carbendazim from fortified soybean sprout at 0.5, 1.0 and 2.0 ppm were averaged 89.1%. Mass spectrometry using a APcI source confirmed the carbendazim residue in the soybean sprout sample. Fragmentation pattern on the APcI LC/MS spectrum of carbendazim was simpler than that from electron impact(EI) mass spectrum. Carbendazim produced 3 major ions including m/z 133, m/z 159 and m/z 191($M^{+}$). This method was sensitive enough to provide reliable and reproducible results for practical applications.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.3
• /
• pp.407-416
• /
• 2021

An active phased array antennas can not only electrically steer the beam by controlling the weighting of the excitation signal, but can also form a pattern null in the direction of the interference source. The weight of the excitation signal to steer the main beam can be easily calculated based on the position of the radiating element. In addition, the weight of the excited signal for pattern null formation can also be calculated by setting the required radiation pattern and using WLSM(Weighted Least Squares Method). However, in a general wireless communication network environment, the location of the interference source is unknown. Therefore, an adaptive pattern null synthesis is needed. In this paper, it was confirmed that pattern null synthesis according to the required radiation characteristic was possible. And based on this, adaptive pattern null synthesis into the direction of an interference source was studied using a binary search algorithm based on observation area. As a result of conducting a simulation based on the presented technique, it was confirmed that adaptive pattern null forming into the direction of an interference is possible in efficient way.

• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.6
• /
• pp.498-503
• /
• 2012

Independent component analysis (ICA) technique based on statistical independency of the signals is known as suitable to identify the source signals by measuring and separating mixed signals through transfer paths and has successfully applied in the field of medical care, communications and so forth. In this study, the ICA technique is introduced for the identification of excitation sources from measured vibration signals of structures, which can be done by evaluating negentropy of centered and whitened vibration signals and correlation of separated signals. To validate the method, numerical analyses are carried out for a plate and a cylinder structure. The results show that the method can be applied efficiently to source identification of complex structures. Nevertheless, additional studies would be required to complement problems of occasional inaccuracy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.49-53
• /
• 2016

Recently, the use of signal compression methods to improve the efficiency of wireless networks have increased. In particular, the MPC system was used in the pitch extraction method and the excitation source of voiced and unvoiced to reduce the bit rate. In general, the MPC system using an excitation source of voiced and unvoiced would result in a distortion of the synthesis speech waveform in the case of voiced and unvoiced consonants in a frame. This is caused by normalization of the synthesis speech waveform in the process of restoring the multi-pulses of the representation segment. This paper presents an ACFBD-MPC (Amplitude Compensation Frequency Band Division-Multi Pulse Coding) using amplitude compensation in a multi-pulses each pitch interval and specific frequency to reduce the distortion of the synthesis speech waveform. The experiments were performed with 16 sentences of male and female voices. The voice signal was A/D converted to 10kHz 12bit. In addition, the ACFBD-MPC system was realized and the SNR of the ACFBD-MPC estimated in the coding condition of 8kbps. As a result, the SNR of ACFBD-MPC was 13.6dB for the female voice and 14.2dB for the male voice. The ACFBD-MPC improved the male and female voice by 1 dB and 0.9 dB, respectively, compared to the traditional MPC. This method is expected to be used for cellular telephones and smartphones using the excitation source with a low bit rate.