• 대한화학회지
• /
• 제55권3호
• /
• pp.373-378
• /
• 2011

본 논문은288, 298, 308, 318 K에서 구성 요소의 전체 영역에서 이성분 혼합물과 그 특징을 발표하였다. 각각의 다른 온도에서 초과유전상수, 초과 몰 부피, 초과 굴절률, 몰 굴절, 초과 몰 굴절은 실험적으로 측정된 이전의 파라미터 값으로부터 계산되었고 Redlich-Kister 식으로 확인했다. 초과 유전상수, 초과 몰 부피, 초과 몰 편광은 음수인 반면에 초과 굴절률은 모든 온도에 대해 메틸 아세테이드의 전체 몰 분율에서 양수이다. 본 결과는 이성분 혼합물에서 발생하는 분자 사이의 상호작용을 고려하여 논의 되었다. Redlich-Kister 다항식의 예측된 계수와 계수에 따른 표준오차 또한 보고되었다.

• Korean Chemical Engineering Research
• /
• 제43권5호
• /
• pp.637-640
• /
• 2005

극성과 비극성의 물질인 methyl tert-butyl ether(MTBE)와 2,2,4-trimethylpentane 혼합물과 methyl ethyl ketone(MEK)와 2,2,4-trimethylpentane 2성분의 액체혼합물 그리고 극성의 물질인 MTBE과 MEK 2성분 액체혼합물의 밀도를 densitometer를 사용하여 278.15 K, 288.15 K, 298.15 K에서 각각 측정하였다. 측정한 밀도로부터 얻은 2성분계 과잉몰부피의 측정값과 Huron-Vidal의 혼합법칙을 사용한 Peng-Robinson-Stryjek-Vera(PRSV)의 3차 상태방정식으로부터 계산한 계산값이 잘 일치하였으며 극성물질을 포함한 혼합물의 몰부피 계산에 3차의 PRSV 상태방정식이 이용될 수 있음을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제33권5호
• /
• pp.1686-1692
• /
• 2012

Densities (${\rho}$), Viscosities (${\eta}$) and ultrasonic speeds (u) of pure acetophenone (AP), propiophenone (PP), $p$-methyl acetophenone ($p$-MeAP), $p$-chloroacetophenone ($p$-ClAP) and those of their binary mixtures with $N$-ethyl aniline ($N$-EA) as a common component, were measured at 303.15 K over the entire composition range. These experimental data were used to calculate the excess volume $V^E$, deviation in ultrasonic speeds ${\Delta}u$, isentropic compressibility $K_s$, intermolecular free length $L_f$, acoustic impedance Z, deviations in isentropic compressibility ${\Delta}K_s$, deviation in viscosity ${\Delta}{\eta}$ and excess Gibbs free energy of activation of viscous flow ($G^{*E}$) at all mole fractions of $N$-ethyl aniline. These parameters, especially excess functions, are found to be quite sensitive towards the intermolecular interactions between component molecules. Theoretical values of viscosity of the binary mixtures were calculated using different empirical relations and theories. The relative merits of these relations and theories were discussed. The experimental results were correlated by using the polynomial proposed by Redlich-Kister equation.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.269-270
• /
• 2012

In this study, for purpose of having a prediction on the flowability of mortar, we use the theory of excess paste, which gives a relationship between viscosity of paste versus water-binder ratio and mortar flow versus relative excess paste volume. Pastes and Mortars with four different mix proportions incorporating mineral admixtures were prepared. As a result of experiment, it seems that high flowability of mortar can be attributed to both lower viscosity of paste and increasing the volume of excess paste.

• 한국응용과학기술학회지
• /
• 제13권3호
• /
• pp.119-125
• /
• 1996

The excess volumes of mixing of benzyl alcohol, ethyl alcohol, halothane, and procaine in vesicle and suspensions of several lipids have been determined at $25^{\circ}C$ using a excess volume dilatometer. The potency of general anesthetics has long been known to be correlated with lipid solubility. Denaturations of the bacteriorhodopsin, which is a sole membrane protein in the purple membrane of Halobacteriun Halobium, were studied by UV/Vis absorption changes. The excess volumes of mixing of benzyl alcohol and procaine in egg lecithin were all found to be negative and this result was confirmed as Miller's supposition.

• Asia Marketing Journal
• /
• 제17권1호
• /
• pp.55-67
• /
• 2015

Despite the well-known predictive power of Dirichlet model on customer loyalty, deviations of share of category requirement (SCR) predicted by Dirichlet model from actual SCR have been repeatedly reported. It has been shown that these deviations can be systematically explained by some factors such as brand's market share, product positioning strategy, purchase volume and retail marketing mix strategies. Presuming that brand equity would be additional sources of these deviations, current study assesses the incremental predictive power of brand equity by using over 4,000 brand-level observations for the consumer packaged goods industry in the U.S. Our model estimations indicate that brands that exhibit higher brand equity enjoy excess loyalty, with the primary driver being volume premium, rather than price premium. Overall, our findings support the notion that idiosyncratic brand properties can explain excess behavioral loyalty, a notion that is in stark contrast with the Dirichlet view of the world: brand equity does not exist.

• 한국자동차공학회논문집
• /
• 제12권2호
• /
• pp.1-8
• /
• 2004

A cylindrical constant volume combustion chamber was used to investigate the exhaust emission characteristics of homogeneous charge, stratified pattern and inhomogeneous charge under various conditions using gas chromatography. In the case of homogeneous charge condition, the $CO_2$ concentration is proportional to excess air ratio and overall charge pressure, the $CO_2$ concentration is proportional to excess air ratio and the UHC concentration is inversely proportional to ignition time and overall charge pressure. In the case of stratified pattern, the RI(rich injection) condition shows better exhaust emission characteristics, especially $CO_2$, than that of HI (homogeneous injection) or LI (lean injection) conditions. In inhomogeneous charge conditions, when initial charge pressure is increased, $CO_2$ and UHC concentration is reduced but $O_2$ concentration is increased. And when the excess air ratio of initial charge mixture is 3.0, UHC and $CO_2$concentration show lowest values.

• International Journal of Automotive Technology
• /
• 제5권3호
• /
• pp.181-188
• /
• 2004

A cylindrical constant-volume combustion chamber was used to investigate the flow characteristics at the spark electrode gap and the combustion characteristics of an inhomogeneous charge methane-air mixture under several parameters such as stratified pattern, initial charge pressure, ignition time and the excess air ratio of the initial charge mixture. Flow characteristics including mean velocity and turbulence intensity were analyzed by a hot-wire anemometer. The combustion pressure development, measured by a piezo-electric pressure transducer, was used to investigate the effect of initial charge pressure, excess air ratio and ignition times on combustion pressure and combustion duration. It was found that the mean velocity and turbulence intensity had the maximum value around 200-300 ms and then decreased gradually to near-zero value at 3000 ms. For the stratified patterns, the combustion rate under the rich injection (RI) condition was the fastest. Under the initial charge conditions, the second mixture was accompanied by an increase in the combustion rate, and that the higher the mass which is added in the second stage injection, the faster the combustion rate.

• Nuclear Engineering and Technology
• /
• 제37권4호
• /
• pp.299-308
• /
• 2005

The behavior of fission gas in all major types of nuclear fuel has been reviewed with an emphasis on more recently discovered aspects. It is proposed that the behavior of fission gas can be classified in a number of characteristic types that occur at a high or low operating temperature, and/or at high or low fissile burnup. The crystal structure and microstructure of the various fuels are the determinant factors in the proposed classification scheme. Three types of behavior, characterized by anisotropic $\alpha$-U, high temperature metallic $\gamma$-U, and cubic ceramics, are well-known and have been extensively studied in the literature. Less widely known are two equally typical low temperature kinds: one associated with fission induced grain refinement and the other with fission induced amorphization. Grain refinement is seen in crystalline fuel irradiated to high burnup at low temperatures, whereas breakaway swelling is observed in amorphous fuel containing sufficient excess free-volume. Amorphous fuel, however, shows stable swelling if insufficient excess free-volume is available during irradiation.

• 한국산업융합학회 논문집
• /
• 제4권2호
• /
• pp.193-198
• /
• 2001

2성분계 혼합물(1,2-dichloropropane + 2-methoxyethanol)에 대해 과잉몰 부피(excess molar volumes) $V^E$ 및 과잉 몰엔탈피(excess molar enthalpies) $H^E$를 298.15K에서 측정하였다. 혼합물의 밀도측정은 digital vibrating tube densimeter를 이용하였고, 과잉 몰엔탈피는 isothermal flow microcalorimeter를 이용하였다. 측정한 과잉 몰부피는 전 조성 영역에서 양의 편차를 나타내었으며, 과잉 몰엔탈피는 S 자형용 보였다. 또한 얻어진 data는 Nelder- Mead의 simplex method를 이용하여 Redlich-Kister 다항식에 접합 (fitting)하였다.