• 한국세라믹학회지
• /
• 제34권3호
• /
• pp.281-288
• /
• 1997

유전율이 높고 온도안정성이 우수하다고 알려져 있는 40Pb(Mg1/3Nb2/3)O3-30PbTiO3-30Pb(Mg1/2W1/2)O3계 세라믹스에 소결온도를 낮추기 위하여 저온에서 액상을 형성하는 91PbO-9WO3를 과잉첨가하여 소결성, 미세구조 및 유전성의 변화에 대하여 조사하였다. 91PbO-9WO3의 첨가량이 증가함에 따라 소결온도가 저하하였으며 6 mol%첨가시는 875$^{\circ}C$에서 소결이 가능하였다. 유전율은 기본조성에서 16,400이었고, 첨가제가 1 mol% 과잉첨가된 경우 18,500으로 최대값을 나타냈으며 이후 첨가량이 증가함에 따라 감소하였다. 첨가제의 첨가량이 2~4mol%인 시편의 온도에 따른 유전율 변화곡선에서 double peak maxima가 나타났으나, 첨가량이 5 mol% 이상인 시편에서는 입계에 텅스텐을 많이 포함하고 있는 결정상이 생성되었고 double peak maxima는 나타나지 않았다.

• 한국전기전자재료학회논문지
• /
• 제15권9호
• /
• pp.764-769
• /
• 2002

The effect of excess Bi contents on the ferroelectric properties of B $i_{3.25}$ L $a_{0.75}$ $Ti_3$ $O_{12}$ (BLT) thin films has been investigated. Bismuth lanthanum titanate thin films with excess Bi contents were prepared onto Pt/Ti/ $SiO_2$/Si substrate by metalorganic decomposition (MOD) technique. The structure and morphology of the films were analyzed using X-ray diffraction (XRD) and atomic force microscopy (AFM), respectively. From the XRD analysis, BLT thin films show polycrystalline structure and the layered-perovskite phase was obtained over 10% excess of Bi contents. As a result of ferroelectric characteristics related to the Bi content of the BLT thin film, the remanent polarization and dielectric constant decreased with increasing over Bi content of 10% excess. The BLT film with Bi content of 10% excess was measured to have a dielectric constant of 326 and dielectric loss of 0.024. The BLT thin films showed little polarization fatigue test up to 3.5$\times$10$^{9}$ bipolar switching cycling.

• 한국세라믹학회지
• /
• 제34권1호
• /
• pp.31-36
• /
• 1997

유전율이 높고 온도안정성이우수하다고 알려져 있는 Pb(Mg1/3Nb2/3)O3-PbTiO3-Pb(Mg1/2W1/2)O3 계 세라믹스를 산화물혼합법 및 precursor방법으로 제조함에 있어 과잉 MgO의 첨가에 따른 미세구조와 유전특성의 변화에 대하여 조사하였다. MgO를 5mol%이상 과잉첨가하여 100$0^{\circ}C$에 소결한 시편의 유전율은 5000이상이고, -55$^{\circ}C$에서 1$25^{\circ}C$범위에서 변화율은 +25%에서 -5$0^{\circ}C$ 정도를 나타냈다. XRD 분석결과 perovskite상과 Pb2WO5 결정이 주된상이었으며, 소결온도 및 MgO 첨가량이 증가함에 따라 cubic pyrochlore상인 Pb3Nb4O13와 PbWO4는 감소하였다. SEM에 의한 미세구조의 관찰에서 MgO첨가량이 증가함에 따라 결정성장이 촉진되는 것을 알 수 있었으며 이것이 소결온도 증가에 따른 pyrochlore상의 감소와 함께 유전율을 증가시키는 원인이었다. BSE관찰에서 화학성분 분포의 불균일성이 나타났으며, 각각의 소결온도에서 생성되는 결정상과 함께 유전율의 온도의존성을 완만하게 만드는 원인임을 알 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제27권5호
• /
• pp.718-724
• /
• 2006

The heterogeneous association behaviour of various concentration binary mixtures of mono alkyl ethers of ethylene glycol with ethyl alcohol were investigated by dielectric measurement in benzene solutions over the entire concentration range at 25 ${^{\circ}C}$. The values of static dielectric constant $\epsilon_0$ of the mixtures were measured at 1 MHz using a four terminal dielectric liquid test fixture and precision LCR meter. The high frequency limiting dielectric constant $\epsilon_\infty$ values were determined by measurement of refractive index $n_D$ ($\epsilon_\infty\;=\;n_D\;^2$). The measured values of $\epsilon_0$ and $\epsilon_\infty$ were used to evaluate the values of excess dielectric constant $\epsilon^E$, effective Kirkwood correlation factor $g^{eff}$ and corrective correlation factor $g_f$ of the binary polar mixtures to obtain qualitative and quantitative information about the H-bond complex formation. The non-linear behaviour of the observed $\epsilon_0$ values of the polar molecules and their mixtures in benzene solvent confirms the variation in the associated structures with change in polar mixture constituents concentration and also by dilution in non-polar solvents. Appearance of the maximum in $\epsilon^E$ values at different concentration of the polar mixtures suggest the formation of stable adduct complex, which depends on the molecular size of the mono alkyl ethers of ethylene glycol. Further, the observed $\epsilon^E$ < 0 also confirms the heterogeneous H-bond complex formation reduces the effective number of dipoles in these polar binary mixtures. In benzene solutions these polar molecules shows the maximum reduce in effective number of dipoles at 50 percent dilutions. But ethyl alcohol rich binary polar mixtures in benzene solvent show the maximum reduce in effective number of dipoles in benzene rich solutions.

• 한국세라믹학회지
• /
• 제30권8호
• /
• pp.629-634
• /
• 1993

Dielectric and electrostrictive properties of 0.99Pb(Mg1/3Nb2/3)O3-0.01Pb(Mn2/3W1/3)O3 system using KCl-NaCl salts have been investigated as a function of the amount of excess MgO. For the specimens calcined at $700^{\circ}C$ for 1h and then sintered at 115$0^{\circ}C$ for 4h, the perovskite phase and the relative density were about 98% and 95%, respectively. With the addition of excess MgO up to 10mol%, the dielectric constant and the electrostrictive strain increased due to the increase of density and grain size, and these properties were degraded by the further addition of excess MgO. For the 10mol% excess MgO added specimen, the maximum electrostrictive strain, Xmax, and the electrostrictive coefficient, Q11, were 4.5$\times$10-4, 3.5$\times$10-2m4/C2, respectively. These results were correlated with the property of PMW and microstructure.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.730-734
• /
• 1995

The variation of magnetic permeability and dielectric constant and their relationship with microwave absorbing properties are investigated in sintered Ni-Zn ferrite. Toroid specimens of ${(Ni_{0.5}Zn_{0.5}O)}_{1-y}{(Fe_{2}O_{3})}_{1+y}$ ferrites are prepared by conventional ceramic processing technique. The large change in magnetic permeability is observed by the variation of excess $Fe_{2}O_{3}$ in the Ni-Zn ferrites. The more the iron-excess from y=0.04 to y=0.12, the lower value of both $\mu_{r}'$ and $\mu_{r}"$ is observed. However dielectric permittivity increases with the increase of the increase of the excess $Fe_{2}O_{3}$. The control of permittivity is realized by nitrogen sintering atmosphere and excess $Fe_{2}O_{3}$ respectively.

• 한국세라믹학회지
• /
• 제35권3호
• /
• pp.294-302
• /
• 1998

$Pb_{1+x}$($Fe_{0.5}$$Nb_{0.5}$)$O_3$ films have been synthesized on Pt/Ti/$SiO_2$/Si substrates using rfmagnetron sputtering Concentration of Fe and Nb in the deposited films was adjusted to near stoichiometry through the control of target composition, Films deposited with adjusted to near stoichiometry showed better electrical properties such as dielectic and leakage characteristics. Crystallinity and dielectric constant increased with increasing excess PbO upto 9 mol% This study also showed that dielectric constant and leakage current characteristics improved by optimum content of $O_2$ flow during deposition.

• 한국세라믹학회지
• /
• 제30권8호
• /
• pp.671-677
• /
• 1993

Effects of PbTiO3 addition on dielectric properties and extent of PbO loss in Nd-doped Pb(Mg1/3Nb2/3)O3 system were investigated. As the proportion of dopping increased, the phase transition temperature shifted to low region, and the dielectric constant at room temperature decreased rapidly. But as the proportion of PbTiO3 increased, the phase transition temperature shifted to high retion, and the dielectric constant at room temperature increased. The substitution of Nd3+ for Pb2+ decreased the amount of PbO evaporation, therefore the sample sintered well in case of only 1 mole% adding excess PbO.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 추계학술발표대회
• /
• pp.31.1-31.1
• /
• 2009

In an approach to acclimate ourselves torecent ecological consciousness trend, a lead-free piezoelectric material, bismuth sodium titanate (abbreviated as BNT) based bismuth sodium barium titanate (abbreviated as BNT-BT), was considered as an environment-friendly alternative for a lead based piezoelectric system. Ceramic specimens of0.94[(BixNa0.5)TiO3]-0.06[BaTiO3] (x = 0.500~0.515) compositions were prepared by a modified mixed oxide method. To increase the chemical homogeneity andre action activity, high energy mechanical milling machine and pre-milled nanosized powder has been used. In this method (BixNa0.5)TiO3 (x=0.500~0.515) andBaTiO3 were prepared separately from pre-milled constituent materials at low calcination temperature and then separately prepared BNTX (X=1, 2, 3 and 4) and BT were mixed by high energy mechanical milling machine. Without further calcination step the mixed powders were pressed into disk shape and sintered at $1110^{\circ}C$. Microstructures, phase structures and electrical properties of the ceramic specimens were systematically investigated. Highly dense ceramic specimens with homogenous grains were prepared in spite of relatively low sintering temperature. Phase structures were not significantly influenced by the excess amount Bi. Large variation on the piezoelectric and dielectric properties was detected at relative high excess Bi amounts. When $x{\leq}0.505$, the specimens exhibit insignificant variation in piezoelectric and dielectric constant though depolarization temperature is found to be decreased. Considerable amount of decrease in piezoelectric and dielectric properties are observed with higher excess of Bi amounts ($x{\geq}0.505$). This research indicates the advantages of high energy mechanical milling and importance of proper maintenance of Bi stoichiometry.

• 대한화학회지
• /
• 제56권4호
• /
• pp.416-423
• /
• 2012

Using time domain reflectometry, the complex dielectric spectra between 10 MHz to 20 GHz has been measured in the whole composition range at 10, 20, 30 and $40^{\circ}C$ for the binary mixtures of ethylene glycol and dimethyl sulfoxide. For all the mixtures, only one dielectric loss peak was observed in this frequency range. The relaxation in these mixtures can be described by a single relaxation time using the Debye model. A systematic variation is observed in dielectric constant (${\varepsilon}_0$) and relaxation time (${\tau}$). The excess permittivity (${\varepsilon}^E$), excess inverse relaxation time $(1/{\tau})^E$, Kirkwood correlation factor (g) and thermodynamic parameters viz. enthalpy of activation (${\Delta}H$) and Gibbs free energy of activation (${\Delta}G$) have been determined, to confirm the formation of hydrogen bonded homogeneous and heterogeneous cooperative domains, the dynamics of solute - solute interaction and the hindrance to molecular rotation in the hydrogen bonded glass forming ethylene glycol - dimethyl sulphoxide system.