• Structural Monitoring and Maintenance
• /
• v.7 no.1
• /
• pp.1-12
• /
• 2020

Railway tracks are the direct supporting structures of the trains, which are vulnerable to produce large deformation under the temperature stress or subgrade settlement. The health status of track is critical, and the track should be routinely monitored to improve safety, lower the risk of excess deformation and provide reliable maintenance strategy. In this paper, the distributed optical fiber sensor was proposed to monitor the continuous deformation of the track. In order to validate the feasibility of the monitoring method, two deformation monitoring tests on one steel rail model in laboratory and on one real railway tack in outdoor were conducted respectively. In the model test, the working conditions of simply supported beam and continuous beam in the rail model under several concentrated loads were set to simulate different stress conditions of the real rail, respectively. In order to evaluate the monitoring accuracy, one distributed optical fiber sensor and one fiber Bragg grating (FBG) sensor were installed on the lower surface of the rail model, the strain measured by FBG sensor and the strain calculated from FEA were taken as measurement references. The model test results show that the strain measured by distributed optical fiber sensor has a good agreement with those measured by FBG sensor and FEA. In the outdoor test, the real track suffered from displacement and temperature loads. The distributed optical fiber sensor installed on the rail can monitor the corresponding strain and temperature with a good accuracy.

• ETRI Journal
• /
• v.31 no.3
• /
• pp.254-262
• /
• 2009

This paper presents a novel simple filter design method based on a parallel short-ended coupled-line structure with capacitive loading for size reduction and ultra-broad rejection of spurious passbands. In addition, the introduction of a cross-coupling capacitor into the miniaturized coupled-line can create a transmission zero at the second harmonic frequency for better frequency selectivity and attenuation level. The aperture compensation technique is also applied to achieve a strong coupling in the coupled-line section. The influence of using the connecting transmission line to cascade two identical one-stage filters is studied for the first time. Specifically, such a two-stage bandpass filter operating at 2.3 GHz with a fractional bandwidth of 10% was designed and realized with low-temperature co-fired ceramic technology for application in base stations that need high power handling capability. It achieved attenuation in excess of -40 dB up to $4f_0$ and low insertion loss of -1.2 dB with the size of 10 mm ${\times}$ 7 mm ${\times}$ 2.2 mm. The measured and simulated results showed good agreement.

• Korean Journal of Human Ecology
• /
• v.19 no.5
• /
• pp.805-816
• /
• 2010

This study examined the affect of work environment and work-related stress on the mental health of employees. It further sought to provide insights into how employees' work environment and mental health might be improved. Results showed that the relationship between parents of work environment is related to the obsession, depression, working burden is related to the obsession, depression, concern. The lower parts of the relationship with parents and working burden effects every factors. Furthermore, levels of financial compensation and working stability also seemed to have adverse affects on mental health. Secondly, excessive working hours and duty trouble have lots of mutual relationship with the mental health. The lower parts of working stress: excess working hours, duty trouble, and imprecise responsibilities affects the mental health. Especially, the excessive working hours affected all nine parts of mental health level which were examined.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.214-218
• /
• 2008

Because on the high-tension underground distribution line of an electric railway high voltage XLPE Cable two or three circuits between railway stations with a standard as receiving transformer facilities are established at a $30km{\sim}50km$ interval, reactive power in which the phase of a current is larger than that of a voltage is supplied when trains are not working, so when there are no loading or low loading as night. Due to the long-distance trend of the underground distribution system on an alternating current railway distribution line, the terminal voltage of a transformer is over the standard voltage, and after all, commercial cycle overvoltage is continued. To solve this problem, the shunt reactor is installed in middle of power distribution lines to maintain receiver voltage meted under the allowance regulation through control of the reactive power. Also, in case that the thickness of single cable is over $60mm^2$ and length of line is about over 30km, a circuit breaker is broken by shorting shunt ability of charging current in excess of shunt current(31.5A.rms). Therefore, this thesis presents installing the location of shunt reactor for quantitative analysis by using optimum algorism for compensation and control of the charging current.

• Journal of the Korean Chemical Society
• /
• v.38 no.4
• /
• pp.309-318
• /
• 1994

The stable defect structure and the single phase region of La$_2O_3$-modified BaTi$O_3$ have been studied by X-ray diffractometer and scanning electron microscope. The stable defect structure of La$_2O_3$-modified BaTi$O_3$ has been identified as [($Ba^x_{Ba})_{1-2x}(La{\cdot}_{Ba})_{2x}][Ti^x_{Ti})_{1-x/2}(V""_{Ti})_{x/2}]O_3$ which consists of La$^{3+}$ ion substitution for Ba$^{3+}$ ion in the lattice structure and the formation of Ti vacancies for the charge compensation. When 3 mol% of La$_2O_3{\cdot}3/2TiO_3$ was added to BaTi$O_3$, the unit cell structure was transformed from tetragonal to cubic and the solubility limit was about 14 mol%. When La$_2O_3{\cdot}3/2TiO_2$ was added above this solubility limit, the second phase, La$_4Ba_2Ti_5O_{18}$, was formed. In the La$_2O_3$-modified BaTi$O_3$, it was found by the liquid phase sintering process that the sinterability was decreased by excess BaO but increased by excess Ti$O_2$.

• The Korean Journal of Financial Management
• /
• v.7 no.1
• /
• pp.1-20
• /
• 1990

In most of studies on market efficiency, the stability of risk measures and the normality of residuals unexplained by the pricing model are presumed. This paper re-examines stock splits, taking the possible violation of two assumptions into accounts. The results does not change the previous studies. But, the size of excess returns during the 2-week period before announcements decreases by 43%. The results also support that betas change around announcements and the serial autocorrelation of residuals is caused by events. Based on the results, the existing excess returns are most likely explained as a compensation to old shareholders for unwanted risk increases in their portfolio, or by uses of incorrect betas in testing models. In addition, the model suggested in the paper provides a measure for the speed of adjustment of the market to the new information arrival and the intensity of information contents.

• The Journal of Fisheries Business Administration
• /
• v.49 no.1
• /
• pp.67-89
• /
• 2018

In fisheries, as well as in other natural resource-based industries, there is difference between profit and rent. The former is a basic indicator for gauging the business performance of firms, while the latter is for the evaluation of the contribution of resources and industry to economic welfare. Put simply, resource economists are mainly concerned about rent, including pure resource rent and producer surplus (intra-marginal rent [IMR]). In other hand, business economists are mainly concerned about the profitability of the firms comprising the industry. In the academic literature, there are not always clear definitions of the profit and rent concepts and their use in actual analyses. This article will mainly discuss and clarify differences and similarities in profit and rent concepts. In the classical fisheries economic model with one-dimensional homogenous effort and a constant cost per unit of effort, no rent exists in open-access equilibrium. A simple change in this model, for example by introducing heterogeneous effort, opens it to the existence of rent, specifically IMR, at open-access equilibrium. We estimated resource rent and profit from the data using SNA(system of national accounts) and accounting data methods. RR(resource rent) is composed of value-added, compensation of employees, consumption of fixed capital and normal profit in SNA. RR(resource rent) is composed of EBT, Depreciation of fishing rights, financial costs of fishing rights and calculated interests on equity in accounting data methods. We found that the result of two methods is equal. RR is composed of excess profit, rent and interest expenses. In Korea, the magnitude of RR and profit is not different significantly.

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.4
• /
• pp.195-200
• /
• 2006

The conventional discrete circuit for ABS/TCS system was examined and the problems of the system were analyzed by computer simulation. In order to improve the performance of ABS/TCS system, interface IC which has error compensation, comparator and under voltage lock-out circuit was designed and their electrical characteristics were investigated. The voltage regulator was included to compensate the temperature variation in the temperature range from $-20^{\circ}C$ to $120^{\circ}C$ for automobile environment. ABS and brake signal were separated using the duty factor of same frequency or different frequencies. UVLO(Under Voltage Lock-Out) circuit and constant current circuit were applied for the elimination of noise, and protection circuit was applied to cut the excess current off. Layout for IC fabrication was designed to enhance the electrical performance of ABS/TCS system. Layout was consisted of 11 masks, arrayed effectively 8 pads to reduce the current loss. We can see that the result of layout simulation was better than the result of bread board.

• Annals of Occupational and Environmental Medicine
• /
• v.35
• /
• pp.10.1-10.10
• /
• 2023

The purpose of this paper was to review the problems relating to Korea's occupational health services and suggest ways to improve them. Korea can be classified as a welfare state type of conservative corporatism partially interwoven with liberalism. While experiencing compressed economic growth, the economic sectors of developed (excess areas) and developing (deficient areas) countries are interwoven. Therefore, it is necessary to perfect conservative corporatism along with a complementary reinforcement of liberal contents and to apply a multilayered approach focusing on complementing the deficient areas. It is essential to form a national representative indicator related to occupational health, and a strategy for selection and concentration is needed. The proposed central indicator is the occupational health coverage rate (OHCR), which is the number of workers who have applied for mandatory occupational health services under the Occupational Safety and Health Act in the numerator with the total working population in the denominator. This paper proposes ways to raise the OHCR, which is currently at the level of 25%-40%, to 70%-80%, which is the level of Japan, Germany, and France. To achieve this target, it is necessary to focus on small businesses and vulnerable workers. This is an area of market failure and requires the active input of community-oriented public resources. For access to larger workplaces, the marketability of services should be strengthened and personal intervention using digital health resources should be actively attempted. Taking a national perspective, work environment improvement committees with tripartite (labor, management, and government) participation for improvement of the working environment need to be established at the center and in the regions. Through this, prevention funds linked to industrial accident compensation and prevention could be used efficiently. A national chemical substance management system must be established to monitor the health of workers and the general public.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.4
• /
• pp.398-410
• /
• 1982

Summer crops grown in uplands are greatly diversified and show a large variation in difference with year and location in Korea. The principal factor for the variation is weather, in which precipitation and temperature play a leading role and such a weather factors as wind, sun lights also influence production of the summer crops. Since artificial control of weather conditions as a main stress factor for crop production is almost impossible, it must be minimized only by an improvement of cultivation techniques and crop improvement. Precipitation plays a role as one of the most important factor for production of the summer crops and it is considered in two aspects, drought and excess moisture. This country, which belongs to monsoon territory, necessarily encounter one of this stress almost every year, even though the level is different. Therefore, the facilities for both drought and excess moisture are required, but actually it is not easy to complete for them. On this account, crops tolerant to drought, excess moisture and pests should be considered for establishing summer crops. For the districts damaged habitually every season, adequate crops should be cultured and appropriate method of planting, drainage and weed control should be applied diversely. Injuries by temperature is mainly attributed to lower temperature particularly in late fall and early spring, although higher temperature often causes some damages depending upon the kind of crops. Sometimes, lower temperature in summer season playa critical role for yield reduction in the summer crops. However, certain crops are prevented to some extent from this kind of stress by improving varieties tolerant to cold, hot weather or early maturing varieties. As is often the case, control of planting time or harvesting is able to be a good management for escaping the stress. Lodging, plant diseases and pests are considered as a direct or indirect damage due to weather stress, but these are characters able to be overcome by means of crop improvement and also controlled by other suitable methods. In addition, polytical supports capable of improving constitution of agriculture into modern industry is urgently required by programming of data for the damages, establishment of damage forecasting and compensation system.