• 한국가스학회지
• /
• 제22권2호
• /
• pp.59-66
• /
• 2018

최근 무인기에 대한 관심과 수요가 높아지고 있는 가운데, 가동범위가 넓고 전략적으로 활용이 많은 고고도장기체공 무인기의 동력원개발이 연구 목표로 검토되었다. 기존 왕복동 엔진에 수소 연료를 적용하는 기술은 현행으로써 적용성이 용이하고 경제적이다. 수소는 중량당 에너지 밀도가 높아서 한 번 충전으로 장시간 운항을 지속할 수 있고 환경적인 측면에서도 무공해 연료라는 긍정적인 부분이 존재하기 때문에 적합하다고 평가된다. 하지만 현재 수소연료를 왕복동 엔진에 적용한 개발사례가 적은 편이라 향후 기술적으로 많은 연구가 필요한 것으로 판단된다. 항공기는 운항고도에 따라 공기밀도 저감으로 인한 냉각성능 저하 또는 복사열 감소에 의한 주변온도 강하로 과냉각이 될 수 있는 요인들이 존재한다. 따라서 본 실험은 냉각수온을 변화시켜서 이러한 주변온도 변화가 수소연료 엔진에 미치는 연소특성에 대해 살펴보았다. 역화에 의한 안정적인 운전 영역의 제한은 냉각수 온도변화에 의한 영향보다 공기과잉률에 의한 영향이 지배적으로 나타났으며, 냉각수 온도가 증가할 경우 충진효율이 감소하여 토크가 감소하고 냉각수 온도가 감소할 경우 열손실이 증가하여 열효율이 감소하였다.

• 한국수소및신에너지학회논문집
• /
• 제28권2호
• /
• pp.174-180
• /
• 2017

Recently, the world faces the environmental problem such as air pollution due to harmful gas discharged from car and abnormal climate due to the green-house gases increased by the discharge of $CO_2$. Compressed Natural Gas (CNG), one of alternative for this problem, is less harmful, compared to the existing fossil fuel, as gaseous fuel, and less carbon in fuel ingredients and carbon dioxide generation rate relatively favorable more than the existing fuel. However, CNG fuel has the weakness of slow flame propagation speed and difficult fast burn. On the other hand, hydrogen does not include carbon in fuel ingredients, and does not discharge harmful gas such as CO and HC. Moreover, it has strength of quick burning velocity and ignition is possible with small ignition energy source and it's has wide Lean Flammability Limit. If using this hydrogen with CNG fuel, the characteristics of output and discharge gas is improved by the mixer's burning velocity improved, and, at the same time, is possible to have stable lean combustion with the reduction of $CO_2$ expected. Therefore, this research tries to identify the characteristics of engine and emission gas when mixing CNG fuel and hydrogen in each portion and burning them in spark igniting engine, and grasp the lean combustion limit and emission gas characteristics according and use it as the basic data of hydrogen-CNG premixed engine.

• 한국환경과학회지
• /
• 제6권3호
• /
• pp.267-276
• /
• 1997

It has been studded that combustion and the production of air pollution of anthracite - bituminous coal blend In a fluidized bed coal combustor, The objects of thIns study were to investigate mixing characteristics of the particles as well as the combustibility of the low grade domestic anthracite coal and Imported h19h calorific bltununous coal in the fluidized bed coal combustor. They were used as coal samples ; the domestic low grade anthracite coal with heating value of 2,010kca1/kg and the Imported high grade bituminous coal with beating value of 6,520kca1/kg. Also, the effects of air flow rate and anthracite fraction on the reaching time of steady state condition have been studied. The experimental results are presented as follows. The time of reaching to steady state was affected by the temperature variation. The steady state time was about 120 minute at 300sc1h which was the fastest. It has been found that $O^2$ and $CO^2$ concentration were reached steady state at about 100 minute. It has been found that $O^2$ concentration decreased and $CO^2$ concentration increased as the height of fluidlzed bed Increased. It was found that splash zone was mainly located from 25cm to 35cm above distributor. Also, as anthracite traction Increased, the mass of elutrlatlon particles Increased, and $CO^2$ concentration decreased. As gk flow rate Increased,$O^2$ concentration decreased and $CO^2$ concentration increased. Regardless of anthracite fraction and flow rate, the uncombustible weight percentage according to average diameter of elutriation particles were approldmately high In the case of One Particles. As anthracite traction and k now rate Increased, elutriation ratio Increased. As anthracite fraction was increased, exit combustible content over feeding combustible content was Increased. Regardless of anthracite fraction, size distribution of Ued material from discharge was almost constant. Over bed temperature 85$0^{\circ}C$ and excess air 20% , the difference of combution efficiencies were little. It is estimate that the combustion condition In anthracite-bituminous coal blend combustion is suitable at the velocity 0.3m/s, bed temperature 85$0^{\circ}C$, the excess air 20%.

• 대한환경공학회지
• /
• 제30권9호
• /
• pp.948-954
• /
• 2008

침지형 MBR 공정에서 막 오염과 플럭스 감소의 주요 원인인 케이크층에 의한 저항을 저감하기 위하여 분리막 모듈의 외부에 원통형 관을 도입하였다. 도입된 원통형관 안에 노즐과 산기관을 적용하여 공기 주입량에 따른 공기와 액체의 2상흐름(Two phase flow)중 slug 흐름을 유도하여 공기 방울에 의한 막세정의 효과를 비교 분석하였다. 실험결과 동일한 유량의 공기를 공급할 경우 노즐에서 발생한 공기방울이 원통형관으로 유입되면서 효율적인 slug 흐름을 형성으로 산기관을 사용한 공급 방식보다는 막오염 방지에 효과적이었음을 알 수 있었다. 그러나 노즐로 공급되는 공기의 유량을 최적화하지 않는다면 원통형 관의 벽 부분부터 활성슬러지 혼합액이 퇴적하게 되거나 막간에 슬러지가 퇴적되어 관 내부의 급격한 막힘 현상이 발생하여 일정시간이 경과하면, 오히려 산기관보다 급격한 막오염 현상을 나타냄을 알 수 있었다. 또한 원통형 관 내부에 침지된 분리막의 면적의 최적 비율, A$_m$/A$_t$가 비율이 존재하는 것을 확인할 수 있었다. 산기관의 경우에는 A$_m$/A$_t$ 비율이 0.27일 때 최소화된 막오염이 관찰된 반면에, 노즐의 경우에는 A$_m$/A$_t$ 비율이 0.55일 때 막오염이 최소값을 보였다. 따라서 상승하는 공기방울에 의한 막오염 저감효과는 관 내부의 중공사막이 차지하고 있는 비율, A$_m$/A$_t$에 크게 의존하고 있으며, 산기관과 노즐의 경우 그 최적비율은 각각 다름을 알 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권1호
• /
• pp.75-81
• /
• 2000

To provide the appropriate direction for development of transient control in a gasoline engine, transient performance analysis and evalution under four accelerating types based on typical driver's acceleration type were implemented by experimental study. In order to evaluate the characteristics of transient performance quanititatively, the concept and method by transient response specifications were introduced. Several performance parameters in terms of engine speed(RPM), manifold absolute pressure(MAP), fuel injection duration($\DeltatI_{nj}$) and air excess ratio($\lambda$) were emasured simultaneously during the four types of the throttle valve opening with the step motor controlled by PC. The result showed that transient response specifications in terms of delay time, rising time and settling time characterized the transient performance for four acceleration types quantitatively. Intensified acceleration type was most economical and linear acceleration type revealed the best emission performance.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.830-833
• /
• 2004

Hydraulic structures have been constructed with low cost concrete so as to increase the investment efficiency. But, it has caused to produce structures having excess internal voids inside concrete. As the construction of agricultural irrigation and drainage project is concentrated on off-farming season and scattered in wider area, variation of quality of structures is big and it caused increase of internal voids. Due to that reason, hazardous substance is passing rather freely through the voids causing occur of crack and accordingly life time of structures is getting shortened. It is necessary to make a thesis of design criteria for design strength to increase life time, range of variation of quality, strength of ready-mixed concrete proper to design strength, and water-cement ratio and air content.

• 한국연소학회지
• /
• 제11권4호
• /
• pp.14-21
• /
• 2006

In this study, syngas which is reformed from fossil fuel and has hydrogen as a major component, was added to a gasoline engine to improve combustion stability and exhaust emissions of idle state. Syngas fraction of the total supplied fuel varied to 0 %, 25 %, 50 % with various ignition timing and excess air ratio. Combustion stability, exhaust emissions, fuel consumption and exhaust gas temperature were measured to investigate the effects of syngas addition on idle performance. Results showed that syngas has ability to widely extend lean operation limit and ignition retard range with dramatical reduction of engine out emissions. It is supposed that the usage of syngas in the internal combustion engine is an effective solution to meet the future strict emission regulations.

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2002년도 춘계 국제 학술대회
• /
• pp.84-90
• /
• 2002

In 1995 we licensed pyrolysis gas melting technology of indirect heating type (using kiln) from Siemens AG, and built its demonstration facility in 1998 at Clean-Park-East of Fukuoka City to demonstrate the technology for municipal solid waste (MSW). In 1997 we were awarded an order from Kanemura Co., Ltd. to build a pyrolysis gas melting and power generation plant, specifically for treating residue from car shredder. The latter was launched in 1998, and is currently in commercial operation. The operation of these plants have proven the following facts. (1) The system is capable for performing a stable operation with a wide variety of waste. (2) Pyrolysis is achieved steadily regardless of the variation in the quality of waste. (3) The system can be operated under low excess air ratio (1.2∼1.3). (4) The concentration of dioxins at the furnace outlet is 0.062ng-TEQ/㎥$\_$N/, and 0.002ng-TEQ/㎥$\_$N/, at the stack. (the value is corrected to dryO$_2$ 12％) (5) The purity of recovered metals exceeds 90%.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.275-278
• /
• 2002

The purpose of this study is to investigate the combustion characteristics of the flat burner using metal fiber. By changing the excess air ratio which affects strongly to the combustion characteristics, the flame stability range in the metal fiber were found and the range of the blue flame mode and radiant mode were distinguished and $NOx\;and\;O_{2}$ distributions in combustor were measured at two conditions which represents the blue flame mode and radiant mode.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.341-342
• /
• 2012

The effect of high ash coal which has relatively high ash content and low combustibility on unburned carbon and NOx emission was experimentally investigated at several excess air ratio and particle size conditions of four coals containing different ash content in a drop tube furnace. Flue gas was measured by Gas analyzer in order to figure out unburned carbon characteristics. The results show that the higher content of ash makes the higher unburned carbon rate, subsequent changes in NOx emission characteristics was investigated.