• The Journal of Engineering Geology
• /
• v.29 no.2
• /
• pp.85-97
• /
• 2019

It can be observed that steep slopes ($65^{\circ}$ to $80^{\circ}$) consist of rock masses were kept stable for a long time. In rock-mass slopes with similar ground condition, steeper slopes than 1 : 0.5 ($63^{\circ}$) may be applied if the discontinuities of rock-mass slope are distributed in a direction favorable to the stability of the slope. In making a decision the angle of the slope, if the preliminary rock mass conditions applicable to steep slope are quantitatively setup, they may be used as guidance in design practice. In this study, the above rock mass was defined as a good continuum rock mass and the quantitative setup criterion range was proposed using RMR, SMR and GSI classifications for the purpose of providing engineering standard for good continuum rock mass conditions. The methods of study are as follows. The stable slope at steep slopes ($65^{\circ}$ to $80^{\circ}$) for each rock type was selected as the study area, and RMR, SMR and GSI were classified to reflect the face mapping results. The results were reviewed by applying the calculated shear strength to the stable analysis of the current state of rock mass slope using the Hoek-Brown failure criterion. It is intended to verify the validity of the preliminary criterion as a rock mass condition that remains stable on a steep slope. Based on the analysis and review by the above research method, it was analyzed that a good continuum rock mass slope can be set to Basic RMR ${\geq}50$ (45 in sedimentary rock), GSI and SMR ${\geq}45$. The safety factor of the LEM is between Fs = 14.08 and 67.50 (average 32.9), and the displacement of the FEM is 0.13 to 0.64 mm (average 0.27 mm). This can be seen as a result of quantitative representation and verification of the stability of a good continuum rock mass slope that has been maintained stable for a long period of time with steep slopes ($65^{\circ}$ to $80^{\circ}$). The setup guideline for a good continuum rock mass slope will be able to establish a more detailed setup standard when the data are accumulated, and it is also a further study project. If stable even on steep slopes of 1 : 0.1 to 0.3, the upper limit of steep slopes is 1 : 0.3 with reference to the overseas design standards and report, thus giving the benefit of ensuring economic and eco-friendlyness. Also, the development of excavation technology and plantation technology and various eco-friendly slope design techniques will help overcome psychological anxiety and rapid weathering and relaxation due to steep slope construction.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.2
• /
• pp.38-61
• /
• 2019

Up until the early twentieth century in Germany, there were two research trends: 1) emphasizing objectives and making detailed observations of archaeological artifacts and sites, 2) tracing the remains of specific nations or ethnic groups and defining their temporal-spatial boundaries by conducting research on material culture in terms of nationalism or ethnocentrism. After the Second World War ended and Germany was divided, West German archaeology focused on observations of artifacts and sites, cataloging them, and doing research on chronology and distribution following their own traditional methodologies. East German archaeology attempted to prove the developing process of history and its Marxist principles based upon material culture and to examine the historic value of inherent specific cultural heritage based on criteria regarding how it corresponded to socialism and contributed to the development of socialism. Nevertheless, East and West German archaeology shared traditional archaeological methods inherited from German archaeology since the nineteenth century, and contact between archaeologists in West and East Germany continued to a degree. Furthermore, East German archaeology produced significant archaeological achievements acknowledged by West German and European archaeologists. These facts provided the momentum to complete rapid incorporation of the archaeologies of West and East Germany in spite of a one-sided process imposed by West German archaeology. In the case of Korea, it seems necessary to make an effort to share common research history and traditions and to encourage mutual academic exchange (e.g. joint excavation and archaeological research). Furthermore, it is also imperative to have open-minded attitudes toward accepting substantial results and interpretations achieved by North Korean archaeologists under scrutiny when and where necessary, despite seeming to have been fossilized by Marxism and Juche ideology. Any efforts to narrow the gap in archaeological research and conservation of cultural heritage between the archaeologies of South and North Korea should be made immediately. The case of Germany demonstrates how such a project could proceed efficaciously.

• Conservation Science in Museum
• /
• v.24
• /
• pp.1-16
• /
• 2020

This paper presents the process of re-conservation and the results of research on the production method of the Iron Sword with Ring Pommel with Three-Pointed Leaf Decoration, one of the excavation findings from Tomb No. 55 in the Dalseong Ancient Tomb Complex in Daegu. This iron sword is a double weapon with two large swords housed within a single sheath. Four smaller swords are attached to the surface of the sheath, two on the upper portion and the other two below. It is the only such two-in-one weapon excavated intact thus far from an ancient Korean tomb. The records show that it underwent conservation treatment twice in the past. In this study, it was subjected to conservation treatment again to replace the stiffener in some cracking areas, and its material, composition, and production method were analyzed by CT, XRF analysis, and stereoscopic microscopy. The sword is mainly made of copper, but the golden component contains both gold and mercury, which suggests that the copper was plated in gold using mercury amalgamation. The examination of the production methods indicates that it was intended more to demonstrate the authority of its owner rather than to serve any practical use. The two upper small swords on the sheath were made in the same manner as the main swords, and the two small lower swords were cut from a single metal sheet. The sheath was made by cutting two metal sheets. Supports were used to attach the two small swords to the upper portion of the sheath, while the lower portion of the sheath was slit to allow the other two small swords to be inserted into it. The ring pommels of the main swords have a three-pointed leaf decoration. As for the other designs, the handle of the main sword features a series of semicircles, the decorative bands on the sheath have waves in dots, and the fish tail of the sheath shows diagonal lines of dots.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.39 no.4
• /
• pp.38-49
• /
• 2021

The maintenance project of the Jeonglimsa temple site started with the objective of restoring the original structure of the temple, however, it was gradually transitioned to a landscaping maintenance project over time that constructs a landscape of the temple area. With paying attention to these facts, this study summarized the characteristics of cultural heritage landscaping of the Jeonglimsa temple site as follows. First, Cultural heritage landscaping is a landscaping act that creates, maintains, and manages landscapes within the spatial scope of the cultural heritage designated under the Cultural Heritage Protection Act and the cultural heritage protection area established around it. It is a work that includes protection and maintenance of the excavated remains, spaces by each function and plans for moving lines, Installation of structures to protect cultural properties, adoption of the facilities and structures for convenience of visitors, and construction of vegetation landscape. Second, the cultural heritage landscaping of the Jeonglimsa temple site has been developed in 5 periods, and these include 'the period of historical site investigation' that the temple name was identified through the designation of cultural assets and excavation investigation by the Japanese rule, 'the construction period of Baekje Tower Park' after the liberation from the Japanese rule, 'the period of Baekje Cultural Area Development Project' designated as a historical site, 'the period of the Comprehensive Development Project for a Specific Area of Baekje Culture',which was proceeded with the establishment of the park and museum instead of restoring the temple building due to the difficulty in gathering the pieces of historical evidence, and 'the period of the Jeonglimsa temple site restoring project', which was designated as a World Heritage Site while restoring the buildings deployment in the Buddhist temple at the time of foundation era of Baekje Dynasty. Third, this study verified the landscape changes of the Jeonglimsa temple site that have been transitioned, for instance, the creation of a commemorative park linked to the outer garden of Buyeo Shrine, the implementation of urban planning of the Japanese colonial era, the creation of a protective environment for the excavated historical structures and temple area, the restoration of building deployment in the Buddhist temple, and the sincerity restoration and utilization of cultural assets. Fourth, the landscape of Jeongnimsa temple site is determined by the subject and scope of cultural property designation, land use, movement lines and pavement, repairing methods of remains, structures, facilities, and vegetation. The characteristics of the cultural heritage landscape of Jeongnimsa Temple were derived, such as creating a procedural landscape considering the expansion of the cultural heritage designation scope, securing authenticity by maintaining relics in consideration of reversibility, creating a vegetative landscape suitable for historical and cultural landscapes, and enhancing the value of cultural heritage enjoyment by providing an open space.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.1
• /
• pp.305-321
• /
• 2022

The stone chamber tomb in Eungpyeong-ri, Buyeo, is a joint tomb that contains the bodies of two individuals. This paper investigates the relationship between the buried persons and the characteristics of the stone chamber tomb. Based on the geographical location, relics, and the excavated human bones, it was determined that the tomb was built during the Sabi Period of the Baekje Dynasty and that the buried individuals were most probably residents of high stature or government officials. To study the excavated bones, the remains were carefully collected and conservation was carried out. Before collecting samples from the human bones for the analytical research, the results of near-infrared analysis were used to collect the samples for the isotope analysis and DNA analysis. The most important issue when handling the excavation site was the reinforcing agent and the concentration of the agent used. In situations like this, Paraloid B-72 is the most suitable agent. When the shape of human bones was difficult to distinguish from the soil, conservation was performed using X-ray and CT imaging data. The same chemical used for the reinforcement of the site was used to complete a minimum level of conservation to the surface areas where the conservation treatment of removing foreign substances, the reinforcement areas, and bonded areas were carried out. The collagen yield from the sample obtained at selected position was 3.8% to 6.1%. The results of analyzing the stable isotopes of carbon and nitrogen found in the extracted collagen showed that the stable isotope ratios came out to δ¹³C -18.3‰±0.1‰, -19.0‰±0.1‰ for EBW and δ¹⁵N 10.7‰±0.5‰, 10.6‰±0.1‰ for EBE. It is believed the two individuals consumed small amounts of minor cereals, mainly from C₃ plants, and protein was obtained from eating terrestrial animals. What's more, the deviations in data obtained from the two individuals were so small that it could be inferred that the individuals ate similar foods. Considering the preservation state of the sample, amplifying DNA for the DNA analysis would have been very difficult since the amount of surviving DNA was so deficient. For DNA analysis, it is anticipated that the results could be derived by applying improved extraction methods that will be developed in the future. In this research, any association between scientific analysis(DNA and stable isotope ratio) and near-infrared spectroscopy was difficult to establish. Further research is needed on the utilization of near-infrared analysis for gathering samples from human bones.

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.697-714
• /
• 2023

The Tracksite of Cretaceous Dinosaurs and Pterosaurs in Jeongchon, Jinju was discovered in late 2017 during the construction of the Ppuri industry complex. This site is a natural heritage site with a high paleontological value, as it preserves fossils of various types of dinosaurs, pterosaurs, and animal traces at a dense concentration. In this study, we surveyed that physical weathering such as joint, crack, scaling, exfoliation, and fragmentation occurred through field research in the fossil site, and conducted basic research on conservation science to reduce the damage. To this end, among the eight levels identified after excavation, the rocks of Level 3, which yielded a large number of theropod footprint fossils, and Level 4, which yielded pterosaur footprint fossils, were analyzed for material characteristics and evaluation of the effectiveness of consolidation and adhesion. This results showed that the rocks in the Level 3 stratum were dark gray siltstone and the rocks in the Level 4 stratum were dark gray shale, which contained a large amount of calcite and were composed of quartz, plagioclase, mica, alkali feldspar, and other clay minerals, which are likely to be damaged by rainfall under external conditions. As a result of conducting an artificial weathering experiment by dividing the probationary sample into four groups: untreated, consolidation treatment, anti-swelling treatment, and adhesive treatment, the consolidation and the swelling inhibitor showed an effect immediately after treatment, but did not show a blocking effect under a freezing-thawing environment. The adhesive showed that the adhesive effect was maintained even under freezing-thawing conditions. In order to preserve the fossil sites at Jeongchon in the future, in addition to temporary measures to block the inflow of moisture, practical measures such as the construction of protective facilities should be prepared.

• Korean Journal of Heritage: History & Science
• /
• v.57 no.1
• /
• pp.82-108
• /
• 2024

With the transition of archaeological recording method's transition from analog to digital, the 3D scanning technology has been actively adopted within the field. Research on the digital archaeological digital data gathered from 3D scanning and photogrammetry is continuously being conducted. However, due to cost and manpower issues, most buried cultural heritage organizations are hesitating to adopt such digital technology. This paper aims to present a digital recording method of relics utilizing open-source software and photogrammetry technology, which is believed to be the most efficient method among 3D scanning methods. The digital recording process of relics consists of three stages: acquiring a 3D model, creating a joining map with the edited 3D model, and creating an digital drawing. In order to enhance the accessibility, this method only utilizes open-source software throughout the entire process. The results of this study confirms that in terms of quantitative evaluation, the deviation of numerical measurement between the actual artifact and the 3D model was minimal. In addition, the results of quantitative quality analysis from the open-source software and the commercial software showed high similarity. However, the data processing time was overwhelmingly fast for commercial software, which is believed to be a result of high computational speed from the improved algorithm. In qualitative evaluation, some differences in mesh and texture quality occurred. In the 3D model generated by opensource software, following problems occurred: noise on the mesh surface, harsh surface of the mesh, and difficulty in confirming the production marks of relics and the expression of patterns. However, some of the open source software did generate the quality comparable to that of commercial software in quantitative and qualitative evaluations. Open-source software for editing 3D models was able to not only post-process, match, and merge the 3D model, but also scale adjustment, join surface production, and render image necessary for the actual measurement of relics. The final completed drawing was tracked by the CAD program, which is also an open-source software. In archaeological research, photogrammetry is very applicable to various processes, including excavation, writing reports, and research on numerical data from 3D models. With the breakthrough development of computer vision, the types of open-source software have been diversified and the performance has significantly improved. With the high accessibility to such digital technology, the acquisition of 3D model data in archaeology will be used as basic data for preservation and active research of cultural heritage.

• Conservation Science in Museum
• /
• v.31
• /
• pp.21-37
• /
• 2024

This paper sought to garner an understanding of Daegaya glass culture by observing the micro-structure and analyzing the chemical composition of 43 glass beads excavated from the No.73 and 74 ancient tombs in Jisan-dong, Goryeong, which are estimated to have a central age of 5th century CE. The visible characteristics and micro-structure of these artifacts were observed with a optical microscope and an scanning electron microscope, while their chemical composition was analyzed with an energy-dispersing spectrometer attached to the scanning electron microscope. As a result, the glass beads of Jisan-dong, Goryeong were identified to have been formed using various methods such as drawing, casting, and folding techniques, with the majority molded by the drawing technique. In terms of chemical composition, 32.6% were in the potash glass group and 67.4% in the soda glass group, with the latter divided into various fluxes such as high alumina glass, netron glass, and plant ash glass. Compared to Baekje's cultural region in the same age, the composition of these ancient glass artifacts demonstrates a high share of the potash glass group. This shows that, despite the shift from the potash glass group to the soda glass group in ancient Korean glass culture, glass composition differs from region to region or depending on the cultural sphere of influence. In the soda glass group, high-alumina glass comprised 23.3%, natron glass 43.0%, and plant ash glass was 1.2%. Among them, the main type of Korean soda glass is high-alumina glass, as natron glass and plant ash glass are known to have appeared later, but the results of scientific analysis of the glass beads excavated in Jisan-dong can be expected to provide important clues about the inflow and transformation of ancient glass on the Korean Peninsula. In the No. 73, 74, and 74-1 ancient tombs, which were found to have been built in chronological order by the excavation survey, the glass beads showed only slight variations depending on their production period. Nonetheless, the chemical composition of glass is deemed to have a close correlation to color.