• 보존과학연구
• /
• s.26
• /
• pp.103-126
• /
• 2005

Coprostanol is a metabolic product of cholesterol, formed by microbial action in the mammalian gut. This chemical compound is the major sterol in human and has been routinely studied as a biomarker of sewage pollution in marine and lacustrinesediments. This has led to the search for coprostanol as a biomarker in archaeologicalsoils, in order to detect the presence of fecal material. In this study, five samples of archaeological soils excavated at Wanggung ri, Iksancity, were used to assess the possibility of using coprostanol as indicators of ancient human activity in archaeological areas. The sampled soils were analyzed MXRD,EDXRF for their physical and chemical properties. And coprostanol was analysed byGC/MSD, using SIM method to detect and quantify specific compound. The results showed the soils were composed of quartz and feldspars, inorganicelement such as $SiO_2$, $Al_2O_3$, $Fe_2O_3$ etc. Moreover, the result from the analysis wasindicated that the specific compound is coprostanol. The coprostanol was determined at $0.16~1.01\mug$/g in the range of concentrations. This finding indicate that clear promise exists for the exploitation of coprostanol as biomarker of ancient human activity inarchaeological survey. Therefore such studies can serve to increase the confidence we place on biomarker-based methodologies for assessing fecal pollution. The application of this methodology has proved a simple and effective way of searching for that pattern in successively more aged deposits either known or suspected to contain fecal material. And the more scientific analysis of the soils will be showed to utility of the area ancient dietary life style, ancient environment.

• Journal of Conservation Science
• /
• v.26 no.4
• /
• pp.407-416
• /
• 2010

Bacteria with ability for iron reduction in the soil can use corrosion products of iron remains as energy source. The activities of this bacteria cause the change of corrosion products. As a result, it can be difficult to identify corrosion products promoting corrosion of iron remains. The purpose of this study, is to investigate the change in corrosion products that bacteria causes and to improve understanding about the corrosion of iron remains. To simulate corroded condition of excavated iron remains, carbon steel corroded by solution of NaCl and $Na_2SO_4$ was prepared. Then the prepared carbon steel was immersed in a liquid medium with bacteria. The incubation period was 42days. After experiment, the carbon steel was analyzed by SEM-EDS, X-ray diffraction method. The result is that the carbon was changed to green because of activity of bacteria and that the plate crystal and lozenge crystal were generated on the corrosion specimen. Also, we confirmed that the activities of bacteria differenciated colors and forms of corrosion products.

• Journal of the Korean Professional Engineers Association
• /
• v.1 no.1
• /
• pp.18-25
• /
• 1968

Higher yield in rice paddies is greatly dependent on adequately balanced and timely supply of water. A majority of rice paddy in Korea is generally irrigated by rainfall, but in many cases it has to be supplemented by artificial irrigation for optimum rice culture. Although the water requirement of rice plant is for higher Than that of athec crops, submerged condition of rice paddy is not Necessarily required. The moisture requirement of rice plant varies with its growing stages, and it is possible to increase the irrigation efficiency through reduction of water loss due to percolation in rice paddies. An experimental plots were set up by means of sandomized block design with three duplication; (a) All time submerged, (b) Economically controlled, and (c) Extremely controlled. Three different irrigation periods Were (a) Initial sage, (b) Inter-stage, and (c) Yast stage. The topsoil of the three plots were excavated to the depth of 30 cm and then compacted with clay of 6 cm thickness. There after, they were piled up with the excavated top soils, leveled and cored with clay of 6 cm thickness around footpath in order to prevent leakage. The results obtained from the experiments are as follows, 1. There is no difference among the three experiments plots in terms of physical and chemical conditions, soil properties, and other characteristics. 2. Culm length and ear length are not affected by different irrigation methods. 3. There is no difference in the mature rate and 1, 000 grain weight of rice for the three plots. 4. The control plot which was irrigated every three days shows an increased yield over the all the time submerged plot by 17.8 percent. 5. The clay lined plot whose water holding capacity was held 5 days long, needs only to be irrigated every 7 days. 6. The clay lined plot shows an increased yield over the untreated plot ; over all-the-time submerged plot by 18 percent ; extremely controlled plot by 18 percent, and economically controlled plot by 33 percent. 7. It may be saved in water requirement about one Thirds.

• Journal of Conservation Science
• /
• v.34 no.1
• /
• pp.31-37
• /
• 2018

It was estimated that wooden warehouses excavated from Bongseon-ri site in Seocheon were built around the 5th century according to the soil layers and construction methods of earthen structures. In order to identify the exact date, three wooden materials (BSMG 01, 06, and 12) from wooden warehouses were analyzed through radiocarbon dating using wiggle match. The outermost ring of BSMG 01 produced a radiocarbon date (95.4% confidence interval) of AD 431~551, BSMG 06 produced a date of AD 460~570, and BSMG 12 produced dates of either AD 240~430 or AD 490~510. The common age of the three wooden materials was identified as AD 490-510 and coincided with the original estimated archaeological age. Therefore, this study proved the accuracy of radiocarbon dating using wiggle match.

• Journal of Conservation Science
• /
• v.34 no.1
• /
• pp.51-57
• /
• 2018

Herein, we present the results of the analysis of a lacquer coating fragment excavated from 'Daesungdong No.88 tomb of Gimhae'. We observed the fragment with an optical microscope and used scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) as well as Fourier-transform infrared spectroscopy analysis to determine the structure of the lacquer coating and the technique used for coating. The sample was identified as a Moksim Jophy Lacquer. It is made from wood, painted with textile fabric and coated with soil clay. The SEM-EDS analysis revealed residues of bone meal at the bottom part of the sheath layer. The incorporation of bone meal in a lacquer coating layer is one of the characteristics of the Han Dynasty, and was also found in the Nangnang Region and the United Silla Dynasty. Inside the sword sheath is a specific adherent structure of silk fabric, the same type of leguminous plant found in another sword sheath excavated from the Eastern Han-tomb of Xi'an. Results constitute the latest information about lacquer ware found in the southern district of the Korean peninsula. Moreover, the findings shed light on an international relationship with Kumkwan-Kaya where the sword sheath was produced.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.6
• /
• pp.67-72
• /
• 2019

This study compared the theory of a culvert spacing and analytical results of the seepage flow for the subsurface drainage. i) If culvert spacing (Sc) is within 5 m, the unit drainage (q) is very larger; in contrast, if Sc is 5 m or more, there is very little drainage in the middle between drains. Therefore, the drain spacing should be within 5 m to ensure high drainage efficiency. ii) Since the planned culvert drainage increases linearly with the soil's permeability coefficient (k), k must be taken into account when determining the drain diameter by the planned culvert drainage. iii) As a result of analyzing the drainage performance of the absorbing culvert, the drainage performance is sufficient with the diameter of the corrugated drain pipe Dc = 50 mm at the length of the drain Lc = 100 m. iv) Therefore, if the drain spacing (Sc) is less than 5 m using the low-cost non-excavated drainage pipe method (${\Phi}50mm$ the corrugated drain pipe and fiber mat) rather than the conventional trench drain method (Sc > 10 m, Dc > 100 mm), uniform and high drainage efficiency can be ensured as well as low construction cost. v) The sub-irrigation+drainage culvert requires narrower drain spacing (Sc < 2-3 m) for irrigation. As a result of examining the condition of 35 mm in diameter (Dc) and 2~3 m in drain spacing, it is possible to apply the non-excavated drainage pipe method to the sub-irrigation+drainage culvert because drainage performance is sufficient at the drain length Lc = 50 m.

• Geomechanics and Engineering
• /
• v.19 no.2
• /
• pp.153-165
• /
• 2019

A case study of monitoring and analysis of surface settlement induced by tunneling of Tabriz metro line 2 (TML2) is presented in this paper. The TML2 single tunnel has been excavated using earth pressure balanced TBM with a cutting-wheel diameter of 9.49 m since 2015. Presented measurements of surface settlements, were collected during the construction of western part of the project (between west depot and S02 station) where the tunnel was being excavated in sand and silt, below the water table and at an average axis depth of about 16 m. Settlement readings were back-analyzed using Gaussian formula, both in longitudinal and transversal directions, in order to estimate volume loss and settlement trough width factor. In addition to settlements, face support and tail grouting pressures were monitored, providing a comprehensive description of the EPB performance. Using the gap model, volume loss prediction was carried out. Also, COB empirical method for determination of the face pressure was employed in order to compare with field monitored data. Likewise, FE simulation was used in various sections employing the code Simulia ABAQUS, to investigate the efficiency of numerical modelling for the estimating of the tunneling induced-surface settlements under such a geotechnical condition. In this regard, the main aspects of a mechanized excavation were simulated. For the studied sections, numerical simulation is not capable of reproducing the high values of in-situ-measured surface settlements, applying Mohr-Coulomb constitutive law for soil. Based on results, for the mentioned case study, the range of estimated volume loss mostly varies from 0.2% to 0.7%, having an average value of 0.45%.

• Korean Journal of Heritage: History & Science
• /
• v.36
• /
• pp.69-86
• /
• 2003

This article introduce the manufacturing technique of Silla potteries based on the result excavated from Songogdong and Mulchunri site in Gyungju. As a result, we selected the kiln-site to produce Silla potteries and knew the feature which following to make them. 1. The Environmental elements to take a kiln-site were abundant fuel, plenty water and suitable soil. In particular, efficient usage of refracted winds and reserved space of forepart in the kiln-site were importantly applied to select place of kiln-site. 2. The structure of the kiln-body have been changing according to the time. It could be massproduced by produce-group from the middle and end of sixth centry which the fireplace-kiln was generalized. 3. The work center of equipments were related kiln-site. It consisted of mixed wheel, keepingpit and ditch. We knew that a look-out shed had been appeared according to utility purpose variously. 4. It sees as trimming trace of inner and outter aspects in excavated potteries and we knew that wheel had been turn to the contrast watch direction. For producing pottery of the good guality, various kiln-tools had been used already at Silla period and they used for the different purpose. 5. We intended to know method for laying the potteries in the kiln through the example of the adherent pottery to be melted. Finally, manufature and tomb-site are separated by the time through current situation of Songokdong and Mulchonri site. At the same time, we could know that group of Chounbuk kiln-site moved from the south to the north step by step.

• Geomechanics and Engineering
• /
• v.34 no.2
• /
• pp.115-124
• /
• 2023

By conducting three-dimensional simulation with consideration of small-strain characteristics of soil stiffness, the effects of excavation geometry and tunnel cover to diameter ratio on deformation mechanisms of an existing tunnel located either at a side of basement or directly underneath the basement were systematically studied. Field measurements were used to verify the numerical model and model parameters. For basement excavated at a side of an existing tunnel, the maximum settlement and horizontal displacement of the tunnel are always observed at the tunnel springline closer to basement and tunnel crown, respectively, regardless of basement geometry. By increasing basement length and width by five times, the maximum movements of tunnel located at the side of basement and directly underneath the basement increase by 450% and 186%, respectively. Obviously, tunnel movements are more sensitive to basement length rather than basement width. For basement excavated at a side of an existing tunnel, tunnel movements at basement centerline become stable when basement length reaches 10 H_e (i.e., final excavation depth). Moreover, tunnel heaves due to overlying basement excavation become stable when the normalized basement length (L/H_e) is larger than 8.0. As tunnel cover to diameter ratio varies from 2.5 to 3.0, the maximum heave and tensile strain of tunnel due to overlying basement excavation decrease by up to 41.0% and 44.5%, respectively. If basement length is less than 8 H_e, the assumption of plane strain condition of basement-tunnel interaction grossly overestimates tunnel movements, and ignores tensile strain of tunnel along its longitudinal direction. Thus, three-dimensional numerical analyses are required to obtain a reasonable estimation of tunnel responses due to adjacent and overlying basement excavations in clay.

• Conservation Science in Museum
• /
• v.28
• /
• pp.17-34
• /
• 2022

This study seeks to identify the material characteristics of earthenware excavated from the Bangi-dong Ancient Tomb No. 3 and the articulated stone-mound tomb of the Seokchon-dong ancient tombs in the Songpa region, and analyze the homogeneity and the firing temperature of the materials used at each excavated site. The remains have been studied relatively recently, and the groups of tombs in which they were found demonstrate the transition of ancient Korean burial systems, and at the same time, provide important archaeological data about those in power at the time. The earthenware pottery excavated from the two sites examined in the study were buried at different times, and it is assumed that they were made by procuring weathered soil of similar gneiss, judging from the behavior of the compatible and incompatible elements and the weathering tendency found by examining the main components. In addition, the examination of the mineral composition and microstructure of clay indicates that the earthenware from Seokchon-dong was fired at 950 degrees Celsius or lower at a relatively early stage. On the other hand, the earthenware from Bangi-dong Tomb No. 3 was confirmed to have experienced temperatures below 850 degrees Celsius and above 1,000 degrees Celsius. However, it is difficult to interpret the difference as the result of the changes in firing temperature throughout the eras. It is expected that it will be possible to interpret the changes in earthenware manufacturing techniques by comparing more diverse earthenware potteries and ancient soils.